The bt_driver API was created when Zephyr only had a Bluetooth host
stack, but no controller-side functionality. The only "driver" that
was needed for the host was the HCI driver, and hence "HCI" was
omitted from the name.
With support both for host and controller Zephyr will be getting more
Bluetooth driver types, in particular radio drivers. To prepare for
this, move all HCI drivers to drivers/bluetooth/hci/ and rename the
bt_driver API bt_hci_driver.
Change-Id: I82829da80aa61f26c2bb2005380f1e88d069ac7d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The drivers/bluetooth/controller path adds a native BLE Link
Layer (controller and HCI) to the Bluetooth subsystem. This first
implementation adds support for the nRF5x series of devices
from Nordic Semiconductor. The hal/ folder inside the controller
contains all IC-specific code to interface with the radio and
baseband.
Jira: ZEP-702
Origin: Original
Change-Id: I4ed61d5f67af6b4735d746a38a5b55f054521075
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Refactoring Power Management related code to special file nrf51_pm
making it possible to reuse the functions for H:4 UART driver when
Nordic BLE is flashed with HCI firmware.
Change-Id: If389c1f4af13fa786e5866129624527cec0928e0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move NBLE code to the place where other Bluetooth drivers code resides.
Change-Id: Ibcf9ffb016e9b842bed66a61dff5c101b1573aaa
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add initial code for three-wire (H5) Bluetooth uart driver.
At the moment the driver is EXPERIMENTAL. To test use following
method with qemu:
Run btproxy with three-wire emulation patches:
$ sudo tools/btproxy -d --pty -3
Opening pseudoterminal
New pts created: /dev/pts/21
Opening user channel for hci0
Notice that new device created: /dev/pts/21, use it with qemu -serial
parameter.
Run qemu target with following parameters:
$ make qemu 'QEMU_EXTRA_FLAGS=-serial /dev/pts/21'
Change-Id: I51579ffd8088583df9106689a03b2a0b4aa9e4cb
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
We'll in the future also have a three-wire UART (H:5) HCI driver, so
the current H:4 driver cannot have a generic name.
Change-Id: Id326ae63d6f4d273d0d0c6120143e2f8d62968d1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use device name to find the UART device for Bluetooth usage,
instead of relying on an arbitrary index.
The default device names being used are derived from the original
board.h for each platform. Some of them point to the same device
as UART console. Since this is a Kconfig option, the default
can be overridden so this is not a serious issue.
Change-Id: Ibe82f3968e72ba60f9c033aa3dfcb2fb3c41dc75
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
All driver Makefiles are adding the same cflags and they
have been done inconsistenly, make all drivers inherit
from the top level Makefile and remove unused includes.
Change-Id: Ie66d0ba7a418ac26f7eb709f50c887dc682e935c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates references to CONFIG_BSP_DIR to CONFIG_PLATFORM as part of the
BSP -> platform clean up.
Note that despite the renaming, the usage of the config option remains
unchanged.
Change-Id: I2846c3f761cf09871019c0855bf1824ae03e6b3c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
According to section 3.7 of Documentation/kbuild/makefiles.txt, using
EXTRA_CFLAGS in Makefiles is "still supported but their usage is
deprecated." However, using make EXTRA_CFLAGS="-DSOMETHING" results in
EXTRA_CFLAGS from Makefiles being overwritten, obviously breaking the
build. This patch converts to them to the newer ccflags-y which also
fixes the problem.
Change-Id: I6309439599d4c9cc184f9ecd941bde841982ef07
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds the Makefile and Kconfig files
to support the bluetooth driver in the Kbuild system.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I1f72b13aca8fb098eece04c4f0e1b680639b520f
Johan Hedberg