Commit 940c66f82e added a bunch of
ACPI PNP ID to x86 boards but skipped those for ACRN. And commit
34a2fbfba1 changed the behavior of
PCIe controller to looking for PNP ID, it results in compilation
error due to build asserts. So add the PCIe controller node to
the ACRN base DTS file.
Fixes#68956
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Driver BBRAM for STM32 had a compilation error: "unknown type name
'RTC_TypeDef'" due to missing include file.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
The warning should only apply for configurations where the
device may actually send ISO data (e.g. not the ISO sync receiver).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The nRF54* SoCs are in a very early stage of production and the software
supporting them is to be considered experimental. Document this
accordingly in the respective boards.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The conversion of the raw sensor value overflows because
only a 32 bit multiplication is executed.
Fix the issue by promoting the raw sensor value to uint64_t before
executing the multiplication.
Analysis:
The current implementation overflows for all raw values grater
than 9544(14-bit).
But according to the datasheet the sensor has a maximum resolution of
20-bit. So Multiplying that value with 450.000 would need at least 39
bit to avoid an overflow, hence do it using 64-bit arithmetic.
Fixes CID 330657
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Add changes to Ethernet and Wi-Fi drivers for v3.6.
Also add information about generic Ethernet and Wi-Fi changes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Quite a few of userspace related functions, macros and struct
have been renamed (z_ to k_). So make notes in the migration
guide.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a few bits about more significant changes in UART.
Small changes and bug fixes are omitted.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The TF-M crypto modules got renames from CRYPTO_XXX_MODULE_DISABLED to
CRYPTO_XXX_MODULE_ENABLED
Therefore also re naming it in zephyr build integration.
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
QCBOR is only needed by the TF-M tests, as they are not build
separately due to the TF-M split build.
If we still set it there is a CMake build warning.
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
The thrift methods loadCertificateFromBuffer(),
loadPrivateKeyFromBuffer(), and
loadTrustedCertificatesFromBuffer() expect a null-terminated
string.
Append '\0' to each array used to hold a certificate in
thrift samples and tests.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The Imax_abs value should be printed using %u instead of %d
as it can be large and should be printed as positive value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If slots partitions are defined, related chosen should be configured.
Fixes build issue in samples/subsys/usb/dfu
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Add missing service data for BASS for the broadcast audio sink
sample.
This also required the controller to increase its maximum data
length. Increased more than minimum required so that the name
can be changed without needing to increase this again.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Updated hal_nordic fixes APPROTECT handling on nRF91 target,
as well as fixes missing alignment of nrfx samples
to modified API of the GPIOTE driver.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add COAP_RESPONSE_CODE_TOO_MANY_REQUESTS to coap_header_get_code(). CoAP
4.29 response code for "Too many requests" is defined in coap.h but was
missing from the list of cases, resulting in a 0 being returned instead
of the proper code.
Signed-off-by: Mike Szczys <mike@golioth.io>
When exiting PM_STATE_SOFT_OFF, the primary core state is always
used to restore bootctl register and the clock and power gating
settings.
This can lead to problems if non-primary core is powered up and down
many times before primary core 0 is powered down the first time.
The saved state in core_desc[0].bctl will be null, and as a result-
power gating and clock gating is not disabled correctly for
non-primary cores.
Link: https://github.com/thesofproject/sof/issues/8642
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Adds reference to new Kconfig,
CONFIG_NORDIC_QSPI_NOR_TIMEOUT_MS,
enabled by updates to nrfx.
Reference: zephyrproject-rtos/zephyr#66711
Signed-off-by: Helmut Lord <kellyhlord@gmail.com>
data->rtc_base is not being used anywhere while data->rtc_registers is
only used as a temporary variable. Remove them from the driver.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Add to management subsystem section of release notes:
- Fix image confirm for Direct XIP
- Support for finding registered command groups
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
Compilation error "undefined reference to log_const_lvgl"
happened in lvgl_keypad_input.c when trying to get logs with
lvgl keypad module. Fixed by adding log level parameter
in log module macro.
Signed-off-by: Eve Redero <eve.redero@gmail.com>
Add a Kconfig option for enabling `MBEDTLS_PLATFORM_ZEROIZE_ALT`, which
is required if the mbed backend already provides an implementation.
For example, the Nordic cryptocell precompiled backends.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Resolves incorrectly located `image_ok` tag in generated hex files when
CONFIG_MCUBOOT_GENERATE_CONFIRMED_IMAGE is used.
Fixes#64098
Signed-off-by: Abram Early <abram.early@gmail.com>
Prevent overrunning the irq vector table.
This is not happening today in tree, but coverity thinks it
may. Checking for it to prevent it is not a bad idea
anyhow, so let's do it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The sensor-based illustration example did not consider the HLP feature
and used the work queue to publish to the Trigger channel. With the HLP,
that is not necessary anymore. The timer ISR can publish to the channel
directly. So, this commit improves the example description by
considering the HLP feature.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Commit 3fbf12487c introduced a way
to add to CONFIG_HEAP_MEM_POOL_SIZE if, for example, subsystems
need more heap space. However, the size check in obj_validation
was still using the old kconfig, and was failing when extra
space was specified. So update the size check to use the updated
size.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The bt_iso_chan_send function could take an optional
timestamp by using 0 as an indicator. The issue with
this approach was that a timestamp value of 0 is valid,
and could cause potential issue with syncing streams
in a group.
To fully support transmitting with and without timestamp,
bt_iso_chan_send_ts has been introduced, which is the only
function of the two (bt_iso_chan_send being the other) that
supports timestamps.
A new function, rather than adding a boolean to the existing,
was chosen as it simplifies the individual functions as well
as making it more explicit what the function does.
Since the bt_iso_chan_send function is used by LE audio, both
the BAP and CAP send functions have similarly been updated.
Likewise, all tests and samples have been updated to use the
updated function(s), and BT_ISO_TIMESTAMP_NONE has been
removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
UART_RX_RDY event can be generated from UARTE interrupt or k_timer
handler. When ENDRX event occurs then k_timer is stopped (it can
be restarted if there is another buffer provided). However, if UARTE
interrupt priority is higher than k_timer priority (RTC is used
underneath) then k_timer handler may still be executed later.
K_timer notifies new bytes based on RXDRDY HW event which is
counter by the TIMER (using PPI). It may happen that RXDRDY
event arrives due to byte received into RX FIFO but since there is
not buffer provided it stays in that FIFO. Given all this, it
was possible that RX_RDY event was reported from ENDRX UARTE event,
timer was stopped but because UARTE interrupt had higher priority
timer handler is executed after UARTE interrupt is handled. In
timer handler TIMER counter reports more bytes and calls
UART_RX_RDY event with null buffer and non-zero amount of bytes.
Fixed by generating UART_RX_RDY event only if RX buffer is not
null.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Henrik Brix Andersen