Add the user specified local address to the list of addresses
that the uIP stack knows.
Change-Id: I53dede27fa1717119a8bad6d7eee574ad3e924f1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make tcpip_input() to return 0 if there is an error when
processing the packet. Value != 0 indicates a successfull
packet processing and in this case the application will
free the packet.
Change-Id: I4aaeb5f0039cfbe25f7238a144964e31a8204148
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Rather than checking whether the remote port is zero, use the IP protocol
field. The remote port might be zero if all incoming connections will be
accepted.
Change-Id: Ia1f24ae94fab27c561267c7bbc0f709fe98ee7e8
Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Assign local UDP port number if not explicitely set by the caller. Use
the timer as a source of uniqueness as there is no random function
available.
If the local UDP port number has been set, verify that it is available
and not already assigned.
Change-Id: I18baac0cbec300cc2a5b7a62dff830d9fafcf2c9
Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When read from the Rx FIFO, pass the network buffer to the uIP IPv6
stack using the tcpip_input() function. As the event is handled, not
all cases where the buffer is to be discarded can be detected.
Thus, if ICMPv6 errors will not be sent, indicate that the packet is
to be dropped by setting its length to zero.
Change-Id: I49f69011685e39759ba25ebb07670308382a5ca8
Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
To make it easy to periodically verify that we have sane stack sizes
it's helpful to have some code to evaluate how much of the stacks are
used. There's already a CONFIG_INIT_STACKS option which pre-fills the
stacks with 0xaa bytes, so we make use of it and in case the option is
enabled run the extra code to evaluate how much of each stack was
used. The trigger for the evaluation is a disconnection event.
Copied from Bluetooth sub-system.
Change-Id: Ic04ff83f682dc9b57afb69e164b972ffd9b860ea
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to waste CPU cycles initializing the stack variables.
Change-Id: I0c517125ef37f7d0de4fd0040c4b4700536cd7c7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move packetbuf from net_buf to net_mbuf, update 802.15.4 stack
with net_mbuf (which is smaller in size, and mostly wrapper for
packetbuf) and split sicslowpan(ipv6/sicslowpan.c|h) functionality
to compression and fragmentataion. This patch contains
null_compression and null_fragmentation which is exactly what
uip_driver.c|h does.
Change-Id: Ifee359e20aa57a50fb00c9ce049d9476b2ac67e3
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Set the uIP output function in order to call the send function in the
registered driver. Do driver initialization and checking cleanups.
Change-Id: I18c9b551320d15fa2619a077d1224f5e521c53ed
Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
After an IP packet has been (reassembled and) received, the driver
submits the IP packet to the IP stack.
Change-Id: Icbd1e7740ce59db16bc1d61002420e86ab101d2d
Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We do not need large 1280 bytes long buffers in lower IP stack
layers. After long packet has been fragmented to smaller chunks
it depends on the radio technology how long buffers we need
to use. For 802.15.4 we can use 128 bytes long buffers.
Change-Id: I8cd6085944d78fa26a4aa1a93c58fc436856541b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fixed the compiler warning about not returning correct value to
caller. Now we return correct value if neighbor solicitation was
sent properly.
Change-Id: Ie28a2ee417bcdf3eb9b24ab91a49c688992e7420
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the return value of the sender is 0, then packet is/was
discarded and we release the net_buf. If the value is 1, then
packet was sent properly and the driver has already freed
the net_buf.
Change-Id: Icd93602225e14f7210fe9ef33603a7451d834a80
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The system library does not know how to print length with %x
modifier.
Change-Id: I9a2b0ec138a8da4a001379fe818cd8694cc78bc8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Helps to monitor what is going on in the stack.
Change-Id: I1707ea07c09082e4f74b1d6c4fa78a9e646485d5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Important to release the net_buf if we discard the packet.
In the future it might be easier if input() would return
status and caller could discard the net_buf if needed.
Change-Id: I533a37ef7f2e80d99ad62301562228189a5e0308
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Created a kconf variable that is used to enable/disable 6LoWPAN
support.
Change-Id: Iaccfe01696ec7226d9a114924c1162fa35959ff9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now we properly register UDP listener and specify callback to be
called when UDP packet is received.
Change-Id: Ia9fded780d53ba2fbfad6a34927dcbd92e42a9e8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to know if we have registered a socket listener, otherwise
we try to register UDP handler too many times.
Change-Id: I060150d01eb149f2a2a6a332d18e0142e5cb7a5e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is enabled so that the loopback network test
driver works.
Change-Id: Ib5e1af2c1b064b0ef71c31be919ea88ed62531ff
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The buffer is released by the driver or some other lower stack
element.
Change-Id: I0ced57df4d95213bae2bbe591a41da6178f4c272
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Inform user when packet is too long. Only printed if logging is
enabled in config.
Change-Id: I3feb052de8edc4b68b36c5190f3d7c8073d9a887
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These are useful to have. The macros are copied from tcpip.c file.
Change-Id: If784fbe449aae6f065af8756c9be6d4ed68a6272
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Changing the spelling to comply with the checkpatch tool.
Change-Id: I7f28fd73bfbc89d91e4d7caccffa2c018dcadf6d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Use the Contiki simple UDP API when sending and receiving the
application data.
Change-Id: I39a379f30c8f7febbea223fcf8f8702faf82e39e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adding the user pointer to the uIP simple-udp API is vital so that
we can pass the net_buf to UDP receiver callback.
Change-Id: If7ee24f344fbd23eb7e0c3a99e78deb996d3667d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Needed only in net_init.c so did not put the prototype into .h file.
Change-Id: If84e835d32bcfafd8e403ffa4def51fa72e0aa3e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Needed so that UDP process can be called from net init.
Change-Id: Iaa165d7773b7f5851d0088aa0d7480b23e1a9199
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow the uIP stack to print information about its internal
status. By default the logging is disabled.
Change-Id: I55a03051d3f541b5f6ea950fdd6406814f937197
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Network driver should call this when it knows the device MAC or
EUI-64 address.
Change-Id: Ie03a80fcdb9a10cd1cb15f12037b3802da13bca9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create a separate utility function to set the IPv6 link local
address using the supplied MAC/EUI-64 address. This is needed
because the net_init() is normally called before the
MAC address is set.
Change-Id: I5d46bd8d802e95a99b4b340d1f37af893b798db8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
TIMO_ENV changed to ZEPHYR_ENV as that one is now in use.
Change-Id: Ia7d7729a7210401ea2191710c708985c0282257a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Call relevant Contiki uIP functions to setup the internal
structures in the uIP stack.
Change-Id: If64df1543d66d0ff378c12f371aa2c06fb2fde0a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The uip_ds6_nbr_get_ll() returns const addr but we need to
overwrite the addr so cast is needed here.
The const pointer returned by nbr-table.c:nbr_table_get_lladdr(),
which is called by uip_ds6_nbr_get_ll(), actually points to
neighbor cache which is dynamic and will never be stored in read
only memory, and thus is safe to cast to non-const.
Change-Id: Ifb47e4cb75054b0a9717304dc1d0bc497fee1e87
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This mega patch changes how Contiki uses buffers. In standard
Contiki there is only couple of static and global buffers.
This makes the stack non-reentrant and only usable in one
thread. This patch replaces the global buffer with buffer
supplied by caller (net_buf.h). The Contiki stack is still not
fully re-entrant after this (packet reassembly needs more TLC)
but it is a good start.
Change-Id: I63abc230b36b14f33f687d3ef64cffb0f3a69f5d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network context defines a network connection.
Change-Id: I29a186be6c9de9d824f10b6442fa1dfd3711d24d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Functions to receive data from apps and transmit it to network, and
receive from network and pass data to apps.
Change-Id: I1b1b8c041e6c5e20294081d2cd403636e9909cdc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to make sure that the structs that are cast to received
network buffer are packed. We also need to enable __may_alias__
attribute for these structs in order to avoid "dereferencing
type-punned pointer" warnings.
Change-Id: Iad65612fd176ed41d66c6fa05c50151001a406eb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Variable called "initialized" is only needed if the nameserver
pool size is bigger than 1 (UIP_NAMESERVER_POOL_SIZE > 1).
Change-Id: I1bce30bd783f76e56f12b8e76b29c932ab5765af
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The function start_periodic_tcp_timer(void) is only needed if one
has UIP_TCP or UIP_CONF_IP_FORWARD defined.
Change-Id: I5185bfbdb998ec3d6985681a85c26e094406c404
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Real timer implementation needs function prototypes.
This is just to satisfy the compiler. Needs more TLC.
Change-Id: I39baa7cfe69d28aa1f330089e22144df286c0a0d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We do not need RIME so commenting out the callback call.
Change-Id: I09cd078a3741c6a8e5f4f8fd6387203e6107f218
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Comment out the psock.h include if TCP is not used.
Change-Id: I83e537b410b867a5ea30fb60c012521df351d05f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Base is from Contiki git tree at git://github.com/contiki-os/contiki.git
commit 6ac939bc58ea76aa37e9b86af55ad51cfc3434e9
This one does not do anything useful yet. It sets the baseline for
subsequent patches.
Change-Id: I7078c938dd59188beceaf47721afaa521d8bde1a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Jukka Rissanen