This commit adds 'clock-frequency' property to the cpu nodes.
The clock frequency specified in the added property is used
during platform configuration. Examples:
- The SWO logger uses clock frequency to configure SWO output.
- Plenty of platforms need CPU clock specified for their HAL.
- Most of devices with USB needs information about CPU clock
in order to configure USB clock source.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
move pinmux.h to drivers/pinmux.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The DT spec. only has "okay" and not "ok". The Linux kernel has around
12k "okay"s and 300 "ok"s.
The scripts/dts scripts only check for "disabled", so should be safe re.
those at least.
The replacement was done with
git ls-files | xargs sed -i 's/status\s*=\s*"ok"/status = "okay"/'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Convert all board_set_xxer(foo) calls to board_set_xxer_ifndef(foo),
which allows the user to make their own decision at CMake time.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This helps by letting us add checks for when the runner has already
been set. There is documentation saying you can set
-DBOARD_DEBUG_RUNNER at the command line and have it take effect,
which turns out not to be true for a large number of boards.
A status message helps the user debug.
(We'll address the existing in-tree boards in the next patch.)
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Documentation update to add instructions to download a
zephyr binary to the target from a Linux host
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Python scripts to download a zephyr binary image (zephyr.bin) to
Intel S1000 from a linux host.
The linux host's SPI master and GPIOs shall be connected to the
corresponding SPI slave and I/Os respectively.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
A YAML file to specify configuration of interface I/Os
such as the SPI device, GPIOs, etc.
The image download script configures the host's SPI and GPIO
interfaces accordingly.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
In order to unify the legacy and composite code, move the class and
vendor request handler buffer into the USB device code, just like in
composite mode. The option is renamed from USB_COMPOSITE_BUFFER_SIZE
into USB_REQUEST_BUFFER_SIZE and also replaces the USB_DFU_MAX_XFER_SIZE
and USB_HID_MAX_PAYLOAD_SIZE options.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Same deal as in commit 4638652214 ("Kconfig: Use 'default' instead of
'def_bool' in Kconfig.defconfig files"), fixing new stuff that got
introduced since then.
Some symbols, like ALTERA_AVALON_PIO, are only defined in
Kconfig.defconfig files, and so need the def_bool.
Motivation (from the note at the end of
guides/kconfig/index.html#common-shorthands):
For a symbol defined in multiple locations (e.g., in a Kconfig.defconfig
file in Zephyr), it is best to only give the symbol type for the "base"
definition of the symbol, and to use 'default' (instead of 'def_<type>'
value) for the remaining definitions. That way, if the base definition
of the symbol is removed, the symbol ends up without a type, which
generates a warning that points to the other definitions. That makes the
extra definitions easier to discover and remove.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
write_buf and flash_content should be defined as global inside
main. Otherwise Python treats them as local variables and ends
up throwing an error because it thinks they are being used
without being defined.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Discovered with pylint3.
Use the placeholder name '_' for unproblematic unused variables. It's
what I'm used to, and pylint knows not to flag it.
Python tip:
for i in range(n):
some_list.append(0)
can be replaced with
some_list += n*[0]
Similarly, 3*'\t' gives '\t\t\t'.
(Relevant here because pylint flagged the loop index as unused.)
To do integer division in Python 3, use // instead of /.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Making a clean slate for some pylint CI tests. Only enabling relatively
uncontroversial stuff.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Linking to API material requires knowing the pecularities of how
doxygen, sphinx, and breathe work. In an attempt to hide some of this
we're preparing the current docs to allow use of configuration defaults
that will let us more simply use a default role that will hunt for a
reference target in the various domains that are available by using a
default "role" of "all". This will let us use the simple notation
`functionname` or `typename` without fully specifying the reference as
:c:func:`functionname`.
This patch cleans up exising docs that were (incorrectly) using single
backtics where double backtics should have been used, and also found
some typos (such as a space between the role name and the reference,
such as :file: `filename`, and a missing colon such as
c:func:`functionname`)
This is a start to address issue #14313
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Maybe this is some "just in case" thing that got copied around. There's
no need to have a blank line at the beginning or end of Kconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A new role :zephyr_file: is available that renders to a link to the file
or folder in GitHub. Find appropriate references using :file: and
convert to :zephyr_file: to take advantage of its linking capability.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Added an assert in the logger thread in case there
is no backends, instead of having that thread spinning
forever. Disabled log in qemu_xtensa board due to lack
of backends.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The command to create the board image binary file assumes the input
is always called zephyr.bin. This is not always the case if custom
name is defined in CONFIG_KERNEL_BIN_NAME. So update the call of
command to use CONFIG_KERNEL_BIN_NAME.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove DCACHE_WRITEBACK Kconfig variable definition in Intel S1000
DMA driver. Remove the variable from default configuration as well.
Cache configuration is fixed and the cache operation routines
internally take appropriate action based on the cache configuration.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Print just the basename of the Input and Output filenames
when creating the board specific image for Intel S1000 CRB
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Be consistent in how board docs are named and move all to index.rst.
This will make the URL to the board documentation predictable and easier
to remember.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The phrase "Zephyr applications use the ..." in many boards and
inconsistently. This is just to say what is the board identify is.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Somehow these were getting generated as `FLASH_foo_BLOCK_SIZE` even
though there's no specification for them in the original yaml. Put them
back until we can figure out what's going on.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Now that all supported xtensa boards use DTS we can move the Kconfig
setting to the arch level. Remove HAS_DTS from board Kconfig files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change compatible, move the JEDEC ID from Kconfig to DTS, convert DTS
size from bytes to bits, remove unreferenced DTS properties. Remove DTS
fixups.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This patchset introduces support for building a board specific custom
image for intel_s1000_crb. This pads the output binary (zephyr.bin)
with some additional data as required by the s1000 BootROM.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Fix the following dtc warnings on S1000:
Warning (simple_bus_reg): /soc/pinmux@81C30: simple-bus unit
address format error, expected "81c30"
Warning (alias_paths): /aliases: aliases property name must
include only lowercase and '-'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some extensions to the multi-level interrupt controller are required
to support SoCs with more than four level 2 interrupt "aggregators".
Extend existing support to allow at most 8 level 2 or level 3
aggregators. Use Kconfig macro templates to cut down on boilerplate.
Try to clarify some aspects of the Kconfig help while we're at it, and
change the type of options which count things or are table offsets
from "hex" to "int", so that the generated .config is easier to read.
Finally, make some improvements to gen_isr_tables.py while we are
here. In particular, move some assignments around to cut down on
duplicated work, don't check for symbols we know must exist, and
improve the debug logging output's readability.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Configuration of Erase command is specified in DTS. Hence
the corresponding changes in Kconfig are removed.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Number of sectors is now calculated from the flash density
i.e. (Flash size)/(sector size).
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
The starting 192kB SRAM is reserved for the mcubootloader. Exclude
this region while building an application to be loaded by mcubootloader.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
FIFO_DEPTH should be in the SoC's Kconfig as this is a
configuration of SPI master controller in SoC.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
This patchset introduces partitioning of flash in terms of blocks
(flash page layout) for s1000. This partitioning is currently to
be used for mcubootloader.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Use DT_ instead of CONFIG_ for spi freq, spi bus name, flash device
name and flash base address.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Provide a dtsi file that sets up common capabilities for all
Feather-based Particle Mesh devices. Provide additional dtsi files for
some obvious peripheral options.
Remove the xtensa esp32 image: it didn't build, and there's no
indication of how the ESP32 firmware can be updated on the Argon board.
Use particle_argon as the nRF52840 side of the board.
Add Particle Boron support.
Note that dtsi files must be replicated in each board directory until
tooling supports DTS includes from a shared area.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Piotr Zięcik