move pinmux.h to drivers/pinmux.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The DT spec. only has "okay" and not "ok". The Linux kernel has around
12k "okay"s and 300 "ok"s.
The scripts/dts scripts only check for "disabled", so should be safe re.
those at least.
The replacement was done with
git ls-files | xargs sed -i 's/status\s*=\s*"ok"/status = "okay"/'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Convert all board_set_xxer(foo) calls to board_set_xxer_ifndef(foo),
which allows the user to make their own decision at CMake time.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This helps by letting us add checks for when the runner has already
been set. There is documentation saying you can set
-DBOARD_DEBUG_RUNNER at the command line and have it take effect,
which turns out not to be true for a large number of boards.
A status message helps the user debug.
(We'll address the existing in-tree boards in the next patch.)
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The HiFive1 and HiFive1 Rev B share the same clock initialization
code, so put it in soc/riscv32/riscv-privilege/sifive-freedom.
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
Same deal as in commit 4638652214 ("Kconfig: Use 'default' instead of
'def_bool' in Kconfig.defconfig files"), fixing new stuff that got
introduced since then.
Some symbols, like ALTERA_AVALON_PIO, are only defined in
Kconfig.defconfig files, and so need the def_bool.
Motivation (from the note at the end of
guides/kconfig/index.html#common-shorthands):
For a symbol defined in multiple locations (e.g., in a Kconfig.defconfig
file in Zephyr), it is best to only give the symbol type for the "base"
definition of the symbol, and to use 'default' (instead of 'def_<type>'
value) for the remaining definitions. That way, if the base definition
of the symbol is removed, the symbol ends up without a type, which
generates a warning that points to the other definitions. That makes the
extra definitions easier to discover and remove.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove most unnecessary instances of `export` and `cmake` use that can
instead be replaced with `zephyr-app-commands` or similar. This is to
avoid documentation using different mechanisms to describe the same
actions and in preparation for documenting `west build` everywhere.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Be consistent in how board docs are named and move all to index.rst.
This will make the URL to the board documentation predictable and easier
to remember.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enable the SPI driver on the HiFive 1
This makes the following configurations choices for the HiFive 1:
The SPI 0 peripheral driver is not enabled by default because it is in
charge of mapping the SPI flash into memory. This can be configured
using the CONFIG_SIFIVE_SPI_0_ROM KConfig option.
The SPI 1 peripheral driver is enabled by default and the pinmux is
configured for all of its outputs
The SPI 2 peripheral driver is enabled by default because it is present
in the DTS for the FE310, but because the QFN48 package used on the
HiFive 1 doesn't route those pins from the silicon die, the pinmux can't
enable the SPI 2 pins.
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
Removed Console dependencies from shell uart backend.
Generated define: CONFIG_UART_SHELL_ON_DEV_NAME for each board.
Fixes#10191
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This board can run in recent qemu versions (>3.0.0), so enable it
instead of a dedicated qemu board.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove some references <board.h> that aren't need or replace them with
<soc.h> where that is the proper include to pull in. Also use "board.h"
instead of <board.h> for how we include the file when its local to the
board code itself.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The dts.fixup for the hifive1 board was not board specific but related
to the SoC. Move the dts.fixup into the SoC dir so any other boards
using this same SoC will take advantage of it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move to getting the clock frequency of the uart from the device tree
instead of a define in the board file. Cleaned up hifive1 board code to
reflect this change in addition to the driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
FE310 is the name of one SoC out of a range of products in the SiFive
Freedom line. The FE310 SoC port in Zephyr is compatible with all of
these products, so rename the SoC to SiFive Freedom
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
This commit moves code from fe310 platform into RISC-V privilege common
folder. This way the code can be reused by other platforms in future.
signed-off-by: Karol Gugala <kgugala@antmicro.com>
Both variables were used (with the same value) interchangeably
throughout CMake files and per the discussion in GH issue,
ZEPHYR_BASE is preferred.
Also add a comment with explanation of one vs. the other.
Tested by building hello_world for several boards ensuring no errors.
Fixes#7173.
Signed-off-by: Alex Tereschenko <alext.mkrs@gmail.com>
When we added support for the HiFive1 board we forget to make sure it
had a board yaml file. Add the file so we get sanitycheck running on
the board.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added support for the HiFive1 board from SiFive
Signed-off-by: Tomasz Michalak <tmichalak@antmicro.com>
Signed-off-by: Karol Gugala <kgugala@antmicro.com>
Signed-off-by: Tomasz Jurtsch <tjurtsch@antmicro.com>
Anas Nashif