Startup on these devices was sort of a mess, with multiple variants of
Xtensa and platform initialization code from multiple ancestries being
invoked at different places for different purposes. Just use one code
path for everyone.
Bootloader entry starts with a minimal assembly stub that simply sets
WINDOW{START,BASE}, PS and a stack pointer and then jumps to C code.
That then uses the cpu_early_init() implementation from cAVS 2.5's
secondary cores to finish Xtensa initialization, and then flows
directly into the pre-existing bootloader C code to initialize cache
and memory and copy the HP-SRAM image, then it invokes Zephyr via a
simple C function call to z_cstart().
Likewise, remove the "reset vector" from Zephyr. This was never a
reset vector, reset on these devices goes to a fixed address in a ROM.
CPU initialization is handled explicitly and completely in the
bootloader now, in a way that can be unified between the main and
secondary cores. Entry from the bootloader now goes directly into
z_cstart() via a C call (via a single jump instruction placed at the
entry point address -- that's going away soon too once we're using a
unified link).
Now that vector table initialization happens in a uniform way, there's
no need to copy the VECBASE value during arch_start_cpu().
Finally note that this also reverts the
CONFIG_RESET_VECTOR_IN_BOOTLOADER kconfig variable added for these
platforms, because it's no longer a tunable and true always.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Currently Zephyr links reset-vector.S twice in xtensa builds:
into the bootloader and the main image. It is run at the end
of the boot loader execution and immediately after that again
in the beginning of the main code. This patch adds a
configuration option to select whether to link the file to the
bootloader or to the application. The default is to the
application, as needed e.g. for QEMU, SOF links it to the
bootloader like in native builds.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
This reverts commit 9987c2e2f9
which spills SoC configs into architecture files and is not
exactly desirable. So revert it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Use BOOTLOADER definition to separate bootloader code. This allows to
use the same file reset-vector.S when building bootloader and when
CONFIG_XTENSA_RESET_VECTOR is enabled.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When compiling the components under the arch directory, the compiler
include paths for arch and kernel private headers need to be specified.
This was previously done by adding 'zephyr_library_include_directories'
to CMakeLists.txt file for every component under the arch directory,
and this resulted in a significant amount of duplicate code.
This commit uses the CMake 'include_directories' command in the root
CMakeLists.txt to simplify specification of the private header include
paths for all the arch components.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit c9ace83c89 which
bypasses setting cache attributes.
The previous cache attributes actually set the text/data/etc.
sections to be inaccessible. So fix it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The identifier looks like a mixed C/C++ comment, which is against
MISRA-C rule 3.1. As the identifier is not used, remove it altogether.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
__start is deemed the entry point for all architectures in Zephyr.
Accordingly, Xtensa code had to be modified a bit to fall in line
with this convention.
Change-Id: If3ed344721c9f2735378b866662a68d8d5795324
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Setting CACHEATTR from _memmap_cacheattr_reset is making
the intel_s1000 SoC get into some unknown state. Removing
it for intel_s1000_crb for now.
Change-Id: Ib44638ef75de6200ef5c2aad55f093a633da864a
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Define memctl_default.S and memerror-vector.S files. A reference
could be found in the Xtensa toolchain directories. These are
required for using cavs21_LX6HiFi3_RF3_WB16 Xtensa CPU mainly in
simulator. On boards which have ROM, these would have been already
defined in the ROM. Hence, the contents of these files will be
developed at a later time if required.
Change-Id: Idf52397bb6880c136525e69f47e09defcba7f036
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
gcc only understands -mlongcalls form of this option, xcc understands
both. Use -mlongcalls for building with both xcc and gcc.
Change-Id: I93f65ccbc97429ae564f1986120b37ce205ee38c
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Added arch sub folder, make files and Kconfig files for a set of standard SoCs.
Change-Id: I4ee9cba966860072e55c95795d87356b665e4d49
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
Andy Ross