Add SPI sub-driver for sensor system.
Use SPI irq number definitions already in Zephyr header file.
Origin: Original
Change-Id: I215db3acc535093dd75c0817cbe5af77e6e76e16
Signed-off-by: Baohong Liu baohong.liu@intel.com
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Support for Freescale/NXP K64 SPI modules, limited to:
- Master mode
- A single active set of clock and transfer attributes (CTAR0), which
includes non-adjustable delay parameters
- Tx FIFO fill and Rx FIFO drain interrupt handling
- Standard, continuous select and continuous SCK SPI transfer formats
Also, divide-by-zero code generation in this driver is prevented.
The 'volatile' attribute is added to some of the variables in the baud
rate and delay calculation functions of the K64 SPI driver in order to
prevent bad code generation by gcc toolchains for ARM seen when an
optimization setting above -O0 is used.
Specifically, a register is loaded with the constant 0 and is used as
the divisor in a following divide instruction, resulting in a
divide-by-zero exception.
This issue has been seen with gcc versions 4.8.1 (the VxWorks toolchain)
and 5.2.0 (the Zephyr SDK toolchain).
Change-Id: Ib5b2b748aad8fdfd5e8d40544e6e1abef3713abe
Signed-off-by: Jeff Blais <jeff.blais@windriver.com>
This driver uses the QMSI library and mostly translates calls from the
Zephyr API to QMSI ones.
This driver conflicts with the native driver implemenation. In order to
enable it, you must set:
CONFIG_QMSI_DRIVERS=y
CONFIG_QMSI_INSTALL_PATH="PATH_TO_QMSI"
CONFIG_SPI_QMSI=y
CONFIG_SPI_QMSI_PORT_0=y
CONFIG_SPI_QMSI_PORT_1=y
Missing:
- Support for using a GPIO pin as Chip Select;
Change-Id: I0d8eca88a2a803b6b3604f396f874313fe90753c
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- Build the actual driver when relevant
- Provide the IOAPIC stub
- Provide the IRQ flags for IRQ_CONNECT_STATIC
- Set the default IRQ priorities
Change-Id: Iea20ef67c92cf7f48791fba5a8021448b7059950
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Such controllers are found in Quark's X1000 series, and thus are found
on Galileo boards v1 and v2.
Change-Id: Ib71486c9f27de1b6c48ce3cb3dd138d69833c2ea
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Baohong Liu