Add ksdk components necessary to build a network driver on k64f to the
build process.
Origin: Original
Change-Id: I777ab2594b4c443d634264625c39c6c875c34d9f
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Provide a random driver wrapped around the KSDK RNGA driver.
Origin: Original
Change-Id: I43feeb37d8d5173c7b95af8e80434fb7dc77a83e
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fix a compilation warning. Compilation of the i2c driver
requires QMSI dma object file. As a solution, the current
code has "selects DMA_QMSI" in i2c Kconfig. This results
in a compilation warning since "select DMA" is also
required. Adding "select DMA" and "select DMA_QMSI"
together in i2c Kconfig can solve the compilation issue.
But, this will cause the dma driver be unnecessarily
enabled. So, the solution is to fix the issue in the QMSI
part instead of in the shim driver.
Jira: ZEP-777 ZEP-778
Change-Id: Id4c1f749bf71eece1e70583bd586a69b596768b2
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add a shim layer around the ksdk I2C driver to adapt it to the Zephyr
I2C interface. Currently only supports master mode.
Jira: ZEP-717
Change-Id: I704b8c38e22e456bb9fa4325682b2a354a27a7ba
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This driver was not included in the original ksdk import, but is needed
to use the ksdk ethernet mac driver.
Origin: NXP KSDK 2.0
URL: kex.nxp.com
Maintained-by: External
Change-Id: Id56037f9c8255dcc18f3eb6792080ace8c7eacd3
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Include the required files for nRF51. This is to prepare the basic build
infrastructure for nRF51.
Origin: Nordic MDK 8.6.1
URL: https://www.nordicsemi.com/eng/nordic/Products/nRF51822/nRF5x-MDK-Pack/48803
Maintained-by: External
Change-Id: Ie594984cc26acdcefac9f6f6a6748ba673ea261c
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
The implementation was using different typedefs than the prototypes
in the header.
Issue: ZEP-695
Change-Id: Ia369daafe1bce39830535d184bd4388b13c986b4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Update the built-in QMSI build to add qm_flash.c into the default
build due to that the clk.c from QMSI 1.1.0 added a new dependency
on qm_flash file.
(https://gerrit.zephyrproject.org/r/#/c/4000/3/ext/hal/qmsi/drivers/clk.c)
Jira: ZEP-703
Change-Id: I9f64e308cec21477a9b96183dec9ecca37ead373
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Disable tx fifo empty interrupt at the completion of a receive
transfer. If the API caller does not send "STOP" at the end of
a receive transfer, unnecessary tx fifo empty interrupt will
come one by one endlessly.
Jira: ZEP-556
Change-Id: I54739459dfab81c28713f6a3c77789e7903bb7f9
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This was merged prematurely.
This reverts commit 758355779c.
Change-Id: I19d27df0b9ea9acf49382d27b5ef6ce49b915542
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The parent commit for this was merged prematurely.
This reverts commit d38208b977.
Change-Id: I4f05f303eac7bdf176fb0522e30eabb839602b25
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Disable tx fifo empty interrupt at the completion of a receive
transfer. If the API caller does not send "STOP" at the end of
a receive transfer, unnecessary tx fifo empty interrupt will
come one by one endlessly.
Jira: ZEP-556
Change-Id: I311aba843e28685e8cca36733ac3f1e09b70d900
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Adds the diskio interface for the FAT file system. This
revision uses RAM to emulate disk storage.
Origin: Original
Jira: ZEP-285
Change-Id: I7a30c8761d5ed9b564f1d1e08482c5ef199d7372
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
This is a client that uses shared keys to execute a TLS handshake and read
info from the server, information on how to run the test is in the README
file.
Jira: ZEP-327
Jira: ZEP-340
Jira: ZEP-495
Origin: https://tls.mbed.org/download/start/mbedtls-2.3.0-apache.tgz
Change-Id: I10f31f3635f346936807b7c8470b3d6ffb3af283
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Modified the Kconfig flag names to identify external FS
with source. This is required to differentiate between
additional external Fat FS code tht may be added in future.
Jira: ZEP-285
Change-Id: Ief4d11f57494fa1f7ba234182b8b922bc82575cc
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
This contain the run of the self test for the ciphers, crypto
algorithms and utilities of mbedTLS.
Jira: ZEP-327
Jira: ZEP-340
Jira: ZEP-495
Origin: https://tls.mbed.org/download/start/mbedtls-2.3.0-apache.tgz
Change-Id: Ic1bb30b7ed691f17421510cd914ec5096e4e70ea
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Modify tinycrypt/Kconfig and tinycrypt/Makefile to include new CTR_PRNG
algorithm.
Jira: ZEP-590
Change-Id: Ied0288126c326d229508c05df4a256dea29cf740
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Update Zephyr's tinycrypt to version 2.0. This new version adds support
for ECC_DH, ECC_DSA, CMAC, & CTR_PRNG.
The following doxygen documentation typos were detected and fixed:
- ctr_prng.h:84 change plen by pLen,
- ctr_prng.h:109 change entropylen by entropyLen,
- sha256.h:110 change Sha256 by s.
ecc_dh.h is also modified to fix the discrepancy of ecc_make_key
definition and declaration.
See https://gerrit.zephyrproject.org/r/#/c/1982/
TC_FAIL and TC_SUCCESS defines are renamed in this new version of
tinycrypt, so net/bluetooth/hci_core.c, net/bluetooth/hci_ecc.c and
net/bluetooth/smp.c are also updated to reflect those changes.
Origin: https://github.com/01org/tinycrypt/archive/v0.2.0.tar.gz
Jira: ZEP-590
Change-Id: I85f4f0ab61d9b0be6a60897e2b96f245dd8c51a8
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Integrating the mbedTLS to the the build proccess with the minimal
Thread configuration.
Change-Id: I0ae191434d26890537a29a247c409228180410f3
Jira: ZEP-327
Jira: ZEP-340
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Adding the mbedTLS configuration neede for Thread Network Protocol
support, this shows the modifications needed to be able to compile
on Zephyr
Jira: ZEP-327
Jira: ZEP-340
Change-Id: I80a8f44bc302905b7aa4568a40a6ca66dcaf42f8
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Porting the mbedTLS library with the minimal Thread supported
configuration, this is a TLS/SSL library highly customizable.
This show the modifications needed to be able to compile on
Zephyr build enviroment which does not have a time.h header file,
so we avoid compilation errors.
Jira: ZEP-327
Jira: ZEP-340
Change-Id: I197ea96d33748c986c71fe5a0608225aee69c8b3
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Adding the pristine version of mbed TLS to the zephyr source tree
as the initial step of porting the mbed TLS library to Zephyr
Jira: ZEP-327
Jira: ZEP-340
Origin: https://tls.mbed.org/download/start/mbedtls-2.3.0-apache.tgz
Change-Id: Iae814560310ebd00af52c7b1fb9d03195388fa0c
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Wrap the ksdk's ARRAY_SIZE macro definition with an ifndef to avoid
conflicting with the same macro in include/misc/util.h.
Change-Id: I102170519857ba6c593c3d3ee96e3394711c625d
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
QMSI provides functions to set the SOC into its various power states,
and for Quark SE it also allows to control the voltage regulator, but
the files with these functions were not being built.
Change-Id: I40f08cdc970eb6696bc5f1d6cd0c407f64bec754
Signed-off-by: Iván Briano <ivan.briano@intel.com>
This is fixed in QMSI 1.1 already and this patch can be reverted when
the next released is merged into Zephyr.
Original commit message:
While performing power measurements in LPSS, it appeared that the value
for LPSS registers was incorrect. Fix this value to enable proper entry
in LPSS mode.
Change-Id: Ie6a4aa5c9aa01ebaad0cd2db722bb9b5c87df5e7
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Update latest revision of the FAT FS code.
Origin: ELM Chan
URL: http://elm-chan.org/fsw/ff/00index_e.html
Change-Id: I602c239055c171595a46986eaa774298117055b6
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
QMSI provides more than just peripheral drivers, and it may be used
from the SOC or by applications that need finer grained control of the
platform.
This also makes the QMSI HAL consistent with the others.
Change-Id: I27490c98ccf1c1afcc090ce1e65f0e066eddc777
Signed-off-by: Iván Briano <ivan.briano@intel.com>
QMSI 1.1 Beta is available on Github:
https://github.com/01org/qmsi/releases/tag/v1.1.0-beta
Update the QMSI drop we maintain in Zephyr and
keep the modification to qm_soc_regs.h introduced on commit
6b88a6b945 "ext qmsi: Add USB base and interrupt defines" since
that patch hasn't made into the QMSI 1.1-Beta release in time.
Also, fix the build where needed:
- add hard dependency from qm_i2c to qm_dma
- fix spi_qmsi_ss.c due to new parameter naming
- fix adc_qmsi.c and adc_qmsi_ss.c due to a new parameter
Change-Id: I01388c787f5ee6ee97fece2e42b24a717522207f
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
This commit should be reverted when these changes will become part of
QMSI 1.1 release.
Change-Id: I4cc91a10515906e3863bb9be59dbead53bd4a938
Signed-off-by: Adrian Bradianu <adrian.bradianu@windriver.com>
This implements the top layer of the FAT FS. It exports an user API
that would be abstacted by Zephyr FS API. It has another set of API
to interface with a bottom layer that would provide platform specific
file systems. A flash file system will be implemented for the bottom
layer.
Jira: ZEP-285
Origin: ELM Chan
URL: http://elm-chan.org/fsw/ff/00index_e.html
Change-Id: Id7c99dbdac9612b1a597bd8099b8a528824afae9
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Add DMA shim driver based on QMSI 1.1
In order to enable this driver, the following options must
be set.
CONFIG_DMA
CONFIG_DMA_QMSI
Jira: ZEP-354
Origin: Original
Change-Id: I604cbf34e90f7653b956a6e4d428424beee3ef87
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Translate the SOC name and part number into the ksdk device path and CPU
macro respectively. This will be used by future ksdk shim drivers and by
the ksdk itself.
Change-Id: I40e94441ee032bfbed7df834be8000d95be53250
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add hidden configuration HAS_KSDK for SoCs to select if they have
support in the ksdk.
Change-Id: Ia4cd11901bc26d21a3bdfad6236d66656bb292cb
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Update to version 8.6.0 and include nrf.h and the additional
files it requires for nRF52. This is so drivers targetting the
nRF Family can include nrf.h directly instead of *nrf5*.h
Origin: Nordic MDK 8.6.0
URL: http://www.nordicsemi.com/eng/Products/Bluetooth-Smart-Bluetooth-low-energy/nRF52832
Maintained-by: External
JIRA: ZEP-377
Change-Id: I71ad9828e1cf95e4d6ef09182a24f00e7d9f01ad
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Tinycrypt is maintained at github and thus should be treated as an
external library and hosted under ext/.
Change-Id: I4c4a3bcdacf01d4922919e5ea1f9dec21a19cd37
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For CMSIS we now have HAS_CMSIS which needs to be added to the
SoC definition.
Instead of changing the main Makefile we now include a sub-Makefile
with all related header and library paths that are hosted in
ext/
Move redifintion of LIB_INCLUDE_DIR later to get variables defined
in Makefile.toolchain.*
Change-Id: I9f90f90247c2a66b4565427b89d4e1d4dd5c9622
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add missing Kconfig files and connections to expose Kconfig options
in ext/ directories. Fixup QMSI to only be exposed on platforms that
utilize it.
Change-Id: I6c6c5011b2bf2966f65aa8279dc594a244821956
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The Kinetis SDK provides device header files and peripheral drivers for Kinetis
SOCs. Importing a subset of the SDK to support the K64F peripherals. This will
make it possible to implement a shim layer to adapt the drivers to Zephyr APIs.
Origin: NXP KSDK 2.0
URL: kex.nxp.com
Maintained-by: External
Change-Id: Ie14b42f75dab9126eb1ca4653538c5707b830cb5
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The ARM Cortex Microcontroller Software Interface Standard (CMSIS) defines a
set of standard interfaces to ARM Cortex-M SOCs. In particular, the CMSIS-CORE
component standardizes the software interface to core and peripheral registers,
as well as exception names and the system clock frequency. Multiple SOC
vendors, including NXP and Nordic Semiconductor, include the CMSIS-CORE header
files in their SOC header files. These SOC header files are in turn used by
the vendor's peripheral drivers.
Origin: ARM CMSIS v4.5.0
URL: https://github.com/ARM-software/CMSIS.git
commit: f25cf2c15304ad872a5b9761651d3f57d6202906
Maintained-by: External
Change-Id: I15c3ddd04619a7608fecb8b710eb115b30cd9632
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This is external source code maintained somewhere else. Put it
under ext/ for clarity and maintainability.
Change-Id: I9e7c9d0948a2ba893006e316dc21d9b1a9edfa93
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Marcus Shawcroft