With Zephyr's prefer-later-defaults behavior, the default value of
CACHE_LINE_SIZE was always 0, because 'default 0' acts like
'default 0 if y'.
Change the code to what was probably the intention (default to 0 unless
CPU_ATOM).
It looks like CACHE_LINE_SIZE is never used in the code when
CACHE_LINE_SIZE_DETECT is on, so maybe things could be simplified
further.
Piggy-back some prompt style consistency cleanups.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit fixes a bug in _get_region_ap(.) by adding
parentheses to enforce the correct operator precedence.
Fixes#8864.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The STM32F7 uses the same USB OTG FS controller than the STM32F4 series.
It is therefore trivial to add support for it, by adding the DT fixup
and pinmux macros, and the DT entries in stm32f7.dtsi. Keep it disabled,
it should be enabled at the board level.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Update _get_region_attr_by_type used to set up the user regions
on a per thread basis to match the REGION_USER_RAM_ATTR macro. Caching
attributes were set "Outer and inner write-through. No write allocate.",
this patch changes it to "Outer and inner write-back. Write and read
allocate.".
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
add nsim soc support, two configs are contained
* em with arc MPUv2
* em with arc SecureShield and MPUv3
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The SAMD0 Family have almost the same clock options.
The samd20 and samd21 only clocks is not implemented yet.
Signed-off-by: Sean Nyekjaer <sean@nyekjaer.dk>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This keeps the efm32wg soc.h in sync with the efr32fg1p soc.h.
This include is currently not necessary, but will be for further
peripheral drivers.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
The Silicon Labs EFR32FG1 Flex Gecko MCU includes:
* Cortex-M4F core at 40MHz
* up to 256KB of flash and 32KB of RAM
* integrated Sub-GHz and/or 2.4GHz radio
* multiple low power peripherals
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
Reduces the number of mpu regions statically reserved at boot time by
one, giving a total of five. We originally sought to reduce the total to
three: 1 background region with lowest precendence for supervisor r/w, 1
flash region, and 1 sram region. However, the nxp mpu hardware does not
give precedence to any region over another, and thus we cannot revoke
access from the background region with a higher priority region. This
means we cannot support hardware stack protection with a single
background region.
Instead, create two background regions that cover the entire address
space, except for sram.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
If we select UART0 as UARTE we will get different defines from the
generation script. Support both UART and UARTE for UART0. Also fixup
UART1 defines since this will always be UARTE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The STM32F769 has more interrupts and features than the STM32F746,
but the basic support is similar with STM32F746
Signed-off-by: Yong Jin <jinyong.iot@foxmail.com>
The stm32f2 version of soc.h misses the changes done in commit
aee97be ("arch: arm: soc: remove core zephyr header inclusions
from soc.h").
Signed-off-by: Istvan Bisz <istvan.bisz@t-online.hu>
The NXP MPU triggers a bus fault when a memory access error occurs. Add
support in the bus fault handler to dump error details from the NXP MPU,
including the port number, mode (supervisor or user), address, bus
master number, and regions.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Pulled CMSDK_BEETLE.h from mbed-os as a starting point to enable CMSIS
support on Beetle. Trimed the file down that what we need on Zephyr
(dropped Device Specific Peripheral Section and system_CMSDK_BEETLE.h).
This lets us drop soc_mpu.h which duplicates MPU info that is defined in
CMSIS headers.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
clear RXNE flag in fifo_read, remove TEACK and REACK
check when uart_stm32_init because stm32f2 doesn't
has those flags.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
This commit refactors internal functions in arm_mpu.c to use
bitsets and functions taken directly from ARM CMSIS instead of
hardcoded arithmetic literals. In several internal functions
some part of the implementation is abstracted further in inline
functions or convenience macros, to facilitate extending the
arm_mpu.c for ARMv8-M. In addition, the commit adds minor
improvements in internal function documentation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit abstracts the attribution generation for an MPU
region, determined based on a supplied configuration and the
given size, from the actual implementation, which is placed
in a separate inline function. This allows to have multiple
implementations of attribution generation for different ARM
MPU drivers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit refactors the _region_init(..) internal MPU driver
function so it gets the region index and a struct arm_mpu_region
as aruments. The latter holds the MPU region configuration that
is to be applied to the region determined by the index argument.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit enforces conditional compilation of mpu_regions.c
in nrf52/CMakeLists.txt depending on whether ARM_MPU_NRF52X
K-option is defined.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
All the STM32F7 SoCs have a TRNG. Adding support for it is just a matter
of tweaking the #ifdef and including the right file from HAL.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Duplicate the ARM MPU-related registers' definitions
specifically for Beetle SOC which is not compliant with
ARM CMSIS and does not include the ARM CMSIS headers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the redundant HAL definition for the ARM
Cortex-M MPU registers, and modifies the ARM MPU driver
implementation to directly use the provided HAL from CMSIS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The entry point can and therefore should be set by linker
scripts. Whenever possible one should express things in the source
language, be it .c or .ld, and not in code generators or in the build
system.
This patch removes the flag -eCONFIG_KERNEL_ENTRY from the linker's
command line and replaces it with the linker script command
ENTRY(CONFIG_KERNEL_ENTRY)
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This commit refactors arm_core_mpu_configure_user_context() so
it can use directly arm_core_mpu_configure().
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit places all the implementation in arm_mpu.c within
build-time guards, ensuring that it is compiled-in only if the
kernel features requiring MPU are present (i.e. USERSPACE,
APPLICATION_MEMORY, or MPU_STACK_GUARDS). An exception to that
is the code required for MPU initialization, which is left out,
as MPU initialization occurs always if MPU is present.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Address Sanitizer helps finding issues related to memory: buffer
overflows, usage of uninitialized memory, etc. This is available in
both Clang and GCC for a while, and, since the POSIX port is only
meant for testing, this will help find issues.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The STM32F723 has more interrupts than the STM32F746 due to the
additional SDMMC controller. Besides that the changes are very
similar to the ones of the STM32F746.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This commit updates the compile options in cmake to distinguish
between ARMv8-M Mainline MCUs with or withouth the optional DSP
extension. A new Kconfig option: ARMV8_M_DSP, is introduced, to
signify the use of an ARMv8-M MCU with DSP support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
All chips from nRF51 and nRF52 series support Segger RTT,
so we can enable it if given series is used.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit cleans up source files in soc/nrf51 soc/nrf52
folders by removing unnecessary header inclusions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the inclusion of kernel_includes.h from
the nRF51 and nRF52 soc.h headers. This prevents from an
inclusion cycle formation on soc.h. In the wake of
kernel_includes.h removal, necessary header files have been
added in several source files to be able to compile Zephyr for
nRF5x SOCs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add an LLVM backend and a clang toolchain variant to support building
with llvm coming with popular Linux distributions.
This has been tested with X86 boards:
- quark_d2000_crb
- quark_se_c1000_devboard/Arduino 101
Use:
export ZEPHYR_TOOLCHAIN_VARIANT=clang
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds an explanatory comment in all soc.h headers,
where kernel_includes.h header has been included, to stress out
that this header must be included after SOC-specific headers are
brought in. The reason is the fact that kernel_includes.h needs
the ARM CMSIS definitions, which are brought in by the
SOC-specific header inclusions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The stm32f7 version of soc.h misses the changes done in commit
aee97be710 ("arch: arm: soc: remove core zephyr header inclusions
from soc.h") as it was not merged at that time. Fix that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This reverts commit 30529da0e4.
We should include SoC headers from HALs before we include
kernel_includes.h. On ARM this is needed because we tend to get CMSIS
related defines setup by the HAL headers.
Fixes: #8593
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The patch adds serial driver support for STM32F7 family
microcontrollers, includes pinmux definitions and DTS fixup file.
Signed-off-by: Yurii Hamann <yurii@hamann.site>
Ulf Magnusson