The term 'context' is vague and overloaded. Its usage for 'an execution
context' is now referred as such, in both comments and some APIs' names.
When the execution context can only be a fiber or a task (i.e. not an
ISR), it is referred to as a 'thread', again in comments and everywhere
in the code.
APIs that had their names changed:
- nano_context_id_t is now nano_thread_id_t
- context_self_get() is now sys_thread_self_get()
- context_type_get() is now sys_execution_context_type_get()
- context_custom_data_set/get() are now
sys_thread_custom_data_set/get()
The 'context' prefix namespace does not have to be reserved by the
kernel anymore.
The Context Control Structure (CCS) data structure is now the Thread
Control Structure (TCS):
- struct ccs is now struct tcs
- tCCS is now tTCS
Change-Id: I7526a76c5b01e7c86333078e2d2e77c9feef5364
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The board runs with 120 MHz CPU frequency, the systick
uses CPU frequncy. This way 120MHz is a correct value.
Change-Id: If47f1ce6371fb7202ececb4d5f8f7c984aa66598
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This introduces the config option CONFIG_UART_CONSOLE,
and also CONFIG_CONSOLE. The UART console can finally
be disabled if desired.
The defconfigs are also being updated.
Change-Id: I5ebaf6471986deca105971e67fcddb43374de94a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This encapsulates the whole serial drivers Kconfig sections, and
allows the whole section to be deactivated.
Change-Id: I84f8d35da74f3c00a44d8c17786ea2297422d68b
Signed-off-by: Daniel Leung <danielcp@gmail.com>
The name of the device is SYSTICK. The device name should be part of the
file name, like all other timer drivers we support. The name
'cortex_m_timer' said nothing about which device the driver is for, since
it's way too generic: it could be for any timer present on any Cortex-M
board.
Change-Id: I39b4f79c32516ec9aff82c55c0ca639fad1b52bb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The Kconfig option PROT_MODE_SWITCH_PROMPT was being used to conditionally
display the "Boot Sequence Options" Kconfig menu. It is simpler to include
both PROT_MODE_SWITCH and its dependent BOOT_A20_ENABLE in the parent menu.
However, doing so necessitates that the name of the parent menu be changed
from "Bootloader Options" to "Boot Options".
Change-Id: I9b9a074a0d4ec5209f5349b42178409c73875b00
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Replaces references to obsolete BSP terminology with platform.
Change-Id: Ibd083558bbbb08a16a68d58251774fb4c84cbbf8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The Kconfig option SW_ISR_TABLE_BSP is not used anymore.
Change-Id: Ifc1be395f5ed7e5d1072a783d800385e69fbc4dc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds Kconfig options for specifying the following platform attributes:
SRAM size
SRAM base address
Flash size
Flash base address
This will allow them to be hoisted out of the platform's linker script file
in a later commit.
Change-Id: I09ba5c09d8f34eea5d787c669d77d27d4389d824
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The Cortex-M related Kconfig menus and options no longer show up at the top
level when "make ARCH=arm menuconfig" is issued. They show up under the
"General Platform Configuration" menu.
Change-Id: I6bf012e628212340f5e089d0193a9a71d90c79b9
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates Kconfig option names as part of transforming BSPs to platforms.
Change-Id: If397bcac8b058e5700e82c3cabbfe64588316d1d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Use Kconfig to define this variable and remove its
previous definitions from board.h. This will simplify
creation of different variants from a single platform.
Change-Id: I0aaa5aa81dedf096c6d8c1ea2d509c71817336d3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds the Kconfig option for selecting the Cortex-M systick timer. This helps
pave the way for moving the Cortex-M systick timer into the drivers/ directory.
Change-Id: Iee040083a425c9c1dbc5973991b89239e0a72eee
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates references to CONFIG_BSP_DIR to CONFIG_PLATFORM as part of the
BSP -> platform clean up.
Note that despite the renaming, the usage of the config option remains
unchanged.
Change-Id: I2846c3f761cf09871019c0855bf1824ae03e6b3c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
also change Zephyr OS to Zephyr Kernel.
Use a script to check and update all default configurations.
Change-Id: I9614d698fd5b7c803590e83a7429403357c09a94
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Makes the ARM CPU type a choice between CPU_CORTEX_M3 and CPU_CORTEX_M4
(similar to the choice of processor for x86). This completes the breaking
of the forced selection of CPU_CORTEX_M3 when CPU_CORTEX_M4 chosen, thereby
making CPU_CORTEX_M3_M4 the true umbrella option for the Cortex M3/M4
processors.
Change-Id: I1d1f39352d85a5848b13102ceb8365c7dede0959
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Makes name more consistent with other CPU_CORTEX_M* options.
Change-Id: I65968cb300207ba0de6231d9a67f2720be77b6ba
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Makes name more consistent with CPU_CORTEX_M3_M4 option.
Change-Id: I6f0a14322b7774df54a3459f91cd3acf07819b04
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Makes name more consistent with CPU_CORTEX_M3_M4 option.
Change-Id: I0b89a50a5c0b728167cd76219d25ddf98243c0dd
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
CPU_CORTEX_M3_M4 replaces CPU_CORTEXM3 as the umbrella option for Cortex M3/M4
processors.
NOTE: Selecting CPU_CORTEXM4 still currently forces the selection of
CPU_CORTEXM3. Breaking that forced select will be done in a later commit.
Change-Id: I0f36b3a2adc5c6c66db4e9b6353b921199544deb
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
- Use Zephyr OS instead of Tiny Mountain
- Update with latest config options and values
Change-Id: I64084c37ce28b25587462468de86e4a904749433
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit add the symbols CONFIG_RANDOM_GENERATOR
to the default configurations.
Change-Id: Iff0e5a7d144993bf1cc9967bcffff037333cdf30
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit sets Execute in Place (XIP) option
as a default for CortexM architectures.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ib9bd361a9ac6c64d9755c6bf3ac5c8df6c1b22f2
This commit update the defconfig files for the arm
architecture with additional Kconfig symbols.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ib9bbde65ae333387cebf63949b7a2e9275489f35
This commit add support to the Kbuild system for the
NUM_TASK_PRIORITIES Kconfig symbol and the corresponding sysgen
parameter.
Change-Id: I6b035437c86d62f72c25d696d18182a7b0448e8f
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit removes the Kconfig symbol KERNEL_DIR.
The symbols was no longer needed because sysgen is only
used on microkernel architectures and the value of
KERNEL_DIR is always "ukernel", therefore it is redundant.
Change-Id: I5e38dd431c5b6f7586e8b25aea330632e96f581f
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds the defconfig files that define the standard
configurations for x86 and arm architecture and the standard
configurations for the following BSPs for microkernel and
nanokernel:
- x86 generic pc
- x86 quark
- arm fsl_frdm_k64f
- arm ti_lm3s6965
They can be applied using the make target defconfig.
This target will generate the corresponding .config
file that will be consumed by the build system.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I128ad52f792eeb61cc80578be5fc3bd427447aaa
Anas Nashif