Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Incase of slip or ethenet use, if these is too much incoming data
current buffer count is not sufficient. Noticed with TCP client
and server example. So increasing it to avoid not enough Rx buffers
issue.
Change-Id: I6eef51c28c7c4751955aa4403122bf17d55ce12c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Remove generic PRINT macros from net samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I4bec179c99056cce41e1f3495c162f25c3cd2364
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
ieee802154 driver is now using new system log macros, update the
Kconfig variable to be a level rather than a bool and the .conf
files at samples.
JIRA: ZEP-311
Change-Id: I640e973d880c3a222cd7c13a72d35edf49ada3a8
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Follow up to TSC decission for further discussion in the networking
WIG.
Change-Id: I148b484dfe308661573e47ed3e60cceed673bddf
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
net_core.h is the ground brick of the IP stack, and thus should not
include other headers that might include net_core.h also: this would
create circular dependencies.
Change-Id: I70c17b736788528e4e0b4b5b2c478098b049c9b1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Makes it possible to test things between qemu and host when
using slip.
Change-Id: I27e17de9f0d8c2c8406f0afdd66c295e827f87a0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use 192.0.2.0/24 address space specified in RFC 5737.
Change-Id: Iff2545f5b0f4817c99813c986d57801e166967a3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check if we have received IPv4 packet and call a handler
function to process it.
Change-Id: I9f9e5f0888d2c3b91401c98f4925647ddce09962
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This echo-server does not yet do anything useful.
Change-Id: I317051b3a2bfb0a80584ad385c2f308978a243cd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tags should be separated with spaces no with comma.
Change-Id: I5381200bcd0caf59f3601ec849d698966c734a28
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
$srctree for the application might not be set to be $ZEPHYR_BASE, use
$ZEPHYR_BASE instead to be more explicit in the build.
Change-Id: Iefa5ff59f246b584949329044f7a6531adc6ed62
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This add CONFIG_BLUETOOTH_DEBUG_LOG which depends on SYS_LOG since the
later can actually use either CONFIG_PRINTK or CONFIG_STDOUT_CONSOLE.
Change-Id: Ib2974d1331f6c91d119a218ec95e8bf01069377b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The echo-server should work just fine even if the multicast
context cannot be get. By default there are only two contexts
so the multicast would fail always anyway and the program
would not run properly.
Change-Id: Ia9737cbda4a933a208aae020f055f0b6062b4f47
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IPv4 address is set properly for testing purposes.
Change-Id: I996e7435276f65dbb642aa9ab99c37cd842d4b39
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If TCP is activated, then the echo-server application starts
to listen TCP socket and reply data to caller. For TCP
connections, the application data is not reversed because
it would make it difficult to verify the data in the sender
side. The TCP packets might be split into smaller chunks by
echo-client so client would have some unnecessary difficult
to verify the data it sent if we reverse it.
Change-Id: Ic146dfc75825bc8057968c581bfe9d3285e0d7b4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can enable TCP server (listening socket) support in the
IP stack. This commit does not yet have TCP client (connecting
socket) support.
Change-Id: I75dd02a81addc1d1e026463b53631d56378157df
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This prepares for adding other debug types besides the printf-style
logging to the console.
Change-Id: Ic2ed305192491734da991c4f61fdaace03fd60f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Makefile.ipstack is more generic to net applications which
communicate through slip or between two qemus. So net apps
common folder is right place for it.
Change-Id: I57ca1eeaff28b853609daf92772361406131aa7e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If the echo-server and echo-client are run in real hw, then
we need to add the used IPv6 prefix to the system. Otherwise
the client is not able to send anything because there is no
route to 2001:db8::/64 network that is used in these examples.
Change-Id: I3a00b77acf1329b3e448bd62ec38cc408c0bd086
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This moves IPSS sample code to samples/bluetooth/gatt which shall become
the default place for GATT related samples that can be reused.
Change-Id: I04089f6e43bfcc30ee1c7cc766620f19e3dad08e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move network testing setup from echo-server to common net_testing.h
file which makes the application much simpler.
Change-Id: I6f68826916c870ad7db597d30f20245bada70091
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Echo-server and client will exchange data without monitor
tool support.
Change-Id: I3cf73a4baf025bf7e5fc634bef696d5f0e6b4c57
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add separate prj_qemu.conf files for qemu_86 board type. Also
remove set_options from Makefile.ipstack which is not required now.
Now build the echo-server with "make server NET_IFACE=qemu" and
echo-client with "make client NET_IFACE=qemu" command options.
Change-Id: I1f3c9c6a198f2b6cae54ae4a5da970b284ef84de
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add bt related qemu flags only when BT is enabled.
Change-Id: Idc611dcf7726829ed77c3f4898abd794a825212f
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This enables using echo_client with Bluetooth by passing
CONF_FILE=prj_bt.conf, it is also enabled for testing so changes to
echo_client are actually tested with NETWORKING_WITH_BT.
Change-Id: I1ff83a9d0049e121dc7e406656e3282b16ee8c91
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If neighbor discovery is in use, then we do not need to do
various route etc setup. Normally ND needs to be active
but in some specific scenarios it can be turned off. One
such scenario is if an application is run inside qemu
which uses slip and host tun0 interface for communication,
in this case host typically do not activate ND for tun0
so we need to disable it also in zephyr side.
Change-Id: I8ac59990c5bbcdb06cca98bde7be3a0ad6e807a8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Rename application init function to init_app() so that it is more
descriptive.
Change-Id: Id470756345c0bd10b103270115b26f3e8a281d17
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use link local addresses instead of public IPv6 addresses
in the demo applications. This way the application do not
need to do any special setup.
Change-Id: I9aa817c388e3f673a6597801813dd1d0a8feb6b5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add spaces after a list of values as required by checkpatch script.
Change-Id: I04bd8af8195e3966fd2b9c36ead49483030eae18
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This enables using echo_server with Bluetooth by passing
CONF_FILE=prj_bt.conf, it is also enabled for testing so changes to
echo_server are actually tested with NETWORKING_WITH_BT.
Change-Id: I1d949798c7a9689ebc2d342ae7342dce32f319e5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is prefered to use #if (!)defined form for checking defines since it
can actually check more complex conditions.
Change-Id: I59c6fff1f2d4e950f9ae64adb9f8833ef0fea4d0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Consolidate networking tests into 1 directory where possible and put
files under samples/net where possible.
Change-Id: Ieb65e000e1717f4d53058f87e36840a0786d467b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For this demo app, set the 2001:db8::/64 address in routing
table. This way we will be able to pass data using these
addresses. Something like this should not be done in real
networking environment.
Change-Id: I1764d5ae09ab95dd580c6b48d6f368bfe283a6a3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The echo-server uses only one code base for both microkernel
and nanokernel.
Change-Id: I7abdf76dc13c31e4f91d0fd9d3b870ffe20ac71b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Separate setup for different low level bearer. By default the
Makefile will create version suitable for qemu testing using
slip. If one writes "make NET_IFACE=802154" then IEEE 802.15.4
radio specific settings are activated.
Because echo-server does not contain any processor specific
settings, remove the ARM config files and rename the x86
specific ones.
Change-Id: I2caf26979f32496c6efb4dd1f625a60e3e5f6744
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Address configurations for different Kconfig options is difficult
to test under different environments. Make it simple at the moment.
Change-Id: I689649b11b4ccb1cf1ff0e90720fa03b6dc3656b
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Use a real board name that can run this kernel instead of a generic
name. Basic functionality exits on this board with Zephyr.
Setup of the board is mostly similar to what we have in galileo (EFI
based)
Change-Id: Ic8554f26dcac0dbbbb6d35d863482f6207dc63c5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
PROJECTINCLUDE is not required in app makefiles.
Change-Id: I3751b7c51c453dfe47d207bb11d171138668c4e7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Setting up new platforms to handle emulation, and make them the only
ones able to run on QEMU from the Makefile "qemu" target to avoid
confusion with other platforms. We have now platform qemu_x86 and
platform qemu_cortex_m3, also modification to the sanity checks to have
qemu support only on those platforms
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I9291918a1d58fea4f37750ada78234628f9a5d98
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Networking code is in net directory in other parts of the
code base so rename network -> net in samples directory.
Change-Id: I0ca0188c6844b0957270398d08b85a3153819e97
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Anas Nashif