Fix an issue where, if a task is pending on a nano timeout, the duration
it wants to wait is not taken into account by the tickless idle code.
This could cause a system to wait forever, or to the limit of the timer
hardware (which is forever, for all intents and purposes).
This fix is to add one field in the nanokernel data structure for one
task to record the amount of ticks it will wait on a nano timeout. Only
one task has to be able to record this information, since, these waits
being looping busy waits, the task of highest priority is the only task
that can be actively waiting with a nano timeout. If a task of lower
priority was previously waiting, and a new task is now waiting, it means
that the wait of the original task has been interrupted, which will
cause said task to run the busy loop on the object again when it gets
scheduled, and the number of ticks it wants to wait has to be recomputed
and recorded again.
Change-Id: Ibcf0f288fc42d96897642cfee00ab7359716703f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adds C++ support to the build system.
Change-Id: Ice1e57a13598e7a48b0bf3298fc318f4ce012ee6
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds extern "C" { } blocks to header files so that they can be
safely used by C++ source files.
Change-Id: Ia4db0c36a5dac5d3de351184a297d2af0df64532
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Enable both controllers by default if GPIO is enabled, providing all the
necessary information.
Change-Id: I5aab00324b10492eefb67e9595da491775cbd95d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no such thing as "IA" in Quark SE SS as it is an ARC core. Plus
for this very specific feature it does not require the ARC aux regs
instruction to read/write in the given mask address.
And fixing also the CONFIG_ option to check.
Change-Id: I1f63348ec85f6e006795f7641c912a30fc003709
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is valid only for Quark SE and Quark SE SS, where it requires to
unmask the interrupt for each specific controller. Thus making the
function generic, using the parameter as the specific mask base address.
Change-Id: Iea0a412b8d94a1ab5e1f3e339eaf632eacee5797
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We can save a great deal of RAM this way, it only needs to be
in RAM if dynamic interrupts are in use.
At some point this config option broke, probably when static
interrupts were introduced into the system.
To induce build (instead of runtime) errors when irq_connect_dynamic()
is used without putting the table in RAM, the dynamic interrupt
functions are now conditionally compiled.
Change-Id: I4860508746fd375d189390163876c59b6c544c9a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This reverts commit 778d5b11c5327be4b40c7745e9beaecfd6327e13.
This patch has been identified as breaking the build when trying
to manually build non-x86 applications.
Change-Id: I1857745049dfef7193de58737108314b7aae01c5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This converts the i2c_quark_se_ss to use the static IRQ API.
Note that, even with separate config functions for each instance of
the driver, it is still saving both RAM and ROM space.
Change-Id: Ieb555ff281b384d87d8e69f6914878bbee0e2ee9
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Decisions on compiler optimizations were done on the architecture level,
this does not scale and some SoCs will have different optimization levels
or compiler options needed. Moving this to the SoC makes it easy to optimize
differently when using the same CPU which we use to set the right optimization
now on the architecture level.
For IAMCU platforms, use the right architecture and tuning.
-march=lakemont -mtune=lakemont -miamcu -msoft-float
Change-Id: I0f77cffe7a139f8b2620935094437d0dfd160dfe
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Kbuild system first looks for a Kbuild file, then it looks for
a make file.
Use the Kbuild for object building and leave the Makefile for definding
build options and compiler flags and other SoC related defines.
Change-Id: I0be59bb5ae02a29108a188efbd6f14dcdb7de4ee
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Instead of relying on the Kconfig variables use a common scheme for
naming i2c devices and use it directly in application.
Change-Id: I745af68d7c1767cc8a24f9655fa45fa33f6baf93
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The ARC EM family processors do not support native atomic assembly
instructions (LLOCK and SCOND). Therefore, the assembly version
of atomic functions cannot be used. This adds pure C version of
these atomic functions.
Change-Id: Ic64dd31b0367b6dcf3a46f41c0c7ac2c2ce5eb8d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch moves the CONFIG_STACK_CANARIES check from architecture's
Makefile to the root Makefile since this option is kernel-related,
not architecture-related. This way we avoid replicating the same
CONFIG_STACK_CANARIES check in several Makefiles.
This patch also removes some blank lines from the Makefiles it touches.
Change-Id: I458f92fa6799526c608369d1e56579936bcb196e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
The semantics of this value is that it allows for the use of IRQ lines
0 through CONFIG_NUM_IRQS - 1.
Change-Id: I0287da931b06253065f4fba076e9a949dcb3cf53
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Too many entries were being created in this table. It needs to
create indexes starting from 16 to CONFIG_NUM_IRQS - 1, since IRQS 0-15
are reserved for CPU exceptions and are not handled through this
mechanism.
generic_arc was still using the old C-based table which is
incompatible with the static IRQ implementation. An attempt was made
to move the SW IRQ table to arch/arc/core, but linker issues were
encountered and this will be done in another patch.
With CONFIG_NUM_IRQS set to 68 on Quark SE, inspection of binary
with objdump -x reveals that we are generating table entries:
00000000 g O .isr_irq16 00000000 _sw_isr_table
00000000 w O .gnu.linkonce.isr_irq16 00000000 _isr_irq16
00000000 w O .gnu.linkonce.isr_irq17 00000000 _isr_irq17
00000000 w O .gnu.linkonce.isr_irq18 00000000 _isr_irq18
...
00000000 w O .gnu.linkonce.isr_irq67 00000000 _isr_irq67
Which is exactly what we need.
Change-Id: I8ca1682128ae67e2a24642791b7ce31ebca759bf
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The ARC is an architecture that supports tickless idle in
nanokernel-only systems, and it thus must signal this to the build
system.
Change-Id: I96b0a4e8f78b2ea67d2f1b3384e94a32d8eb80e8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Modified interrupt handling and idle code to enter and exit tickless
idle mode.
Change-Id: I3461ab6dba30003a4317027fc50a3ba07e830015
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
CONFIG_NUM_IRQS expresses the total number of available interrupt
lines in the system, and is used to generate a vector table.
On ARC, the vector table is assembled from two parts, _VectorTable
for the first 16 entries (reserved for CPU exceptions), and
_IrqVectorTable for the remainder. The code that creates _IrqVectorTable
was not taking this into consideration and was 16 entries too big.
Change-Id: I676c8534274de8782178f3773bc53a817b89481f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
On ARC the IRQ and exception vectors are just one big array of
function pointers placed at the very beginning of the binary in ROM.
Vectors 0-15 are for CPU exceptions, 16-255 for interrupts.
In Zephyr these have been logically split into an execption table
followed immediately by the IRQ table, specified in the ARC linker.cmd.
However, the exception vector table defined in Zephyr had only 14
entries so the IRQ table was misaligned by 8 bytes. This went undetected
for some time as in the default configuration every entry in the IRQ
table pointed to the common demux function _isr_enter().
This patch correctly ensures that the IRQ table begins at address
0x40000040 instead of 0x40000038 like it had been.
Change-Id: I3b548df0dcabeb9d986ecd6a41e593bd02e3bd73
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Causes problems for large values of CONFIG_NUM_IRQS.
Some inconsistencies have been noted in how CONFIG_NUM_IRQS is
used on these platforms, with bugs filed. This patch preserves
existing behavior and has been shown to generate the same number
of table entries for both arches using objdump.
Change-Id: I1d3ac5466978acb56e88a6dc3cbe7cc09431e94d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Let the SoC decide the number of the IRQs. Fixes a bug where
Quark SE gets the default instead of the declared value in the SoC
Kconfig.
Change-Id: I978c923fbe2a0737ace27ec951bc3a46e8976584
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
_IrqVectorTable was renamed to _irq_vector_table
Change-Id: I1488bebc7d8174c08f3ce2dc8bcace6ef567aad6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The current gpio_dw_initialize implementation masks the interruptions in the line
dw_write(base_addr, INTMASK, ~(0)) to assign api functions and initialize
interrupt vectors and handlers safely. Immediately after this, the driver expects
that gpio_dw_unmask_int(port) unmasks the interrupts. Without this patch that
implementation is empty for the quark se ss board.
Change-Id: Iac84c8807fcadad8c256c3fcaa4ff624b6337bf3
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Warning comes during compilation about missing prompt, this sets
the prompt for this SoC.
Change-Id: If8b422d6a870eb99c219ab872924875eb04fba0c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Define boards based on platforms/SoCs and define them under boards/.
Also unify the naming of all platform, SoC and board files and use
platform.h for platforms and board.h for boards.
Change-Id: Icfeb96479ab5800aca98c80a79bdc3cecd645314
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
On Arduino 101, the sensor subsystem also has access to the two UARTs
on board. So this adds the necessary code to enable them to be used.
However, one needs to make sure only one core has access to one UART
at the same time.
Change-Id: I9f6c203916164d1b48559a9752fb1e4d879d7fa4
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
1. Need to unmask interrupts for the sensor subsystem.
2. The GPIO controllers need their clock enabled before they can
start sending out interrupts.
3. Setting up ISR on ARC requires usage of irq_connect().
Change-Id: I633b07292f11e5c5e768fc51fabb70769d407609
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The interrupt number for GPIO0/GPIO1 are 20 and 21 respectively.
The old value of 8 refers to the interrupts line on the x86 side
of GPIO controller.
Change-Id: I2e9e061d3506e27cb7b14e0431c3b6201a50aad4
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
To many people, IPI connotes inter-processor interrupts on SMP
systems. Rename this to IPM, or Inter-Processor Mailboxes.
Change-Id: I032815e23c69a8297c0a43992132441c240fb71e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
define CONFIG_PLATFORM only once in arch/Kconfig and set it
for every platform.
Change-Id: I8554bb36d2d15c3ee71fa63dfc3a763ebca956ee
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Saves an errno per-thread, retrieved via _get_errno(), instead of
changing the value of a global variable during context switches to avoid
a hit to the context switch performance.
Per-arch asm implementations are provided for maximum performance.
Enabled by default, but can be disabled via the CONFIG_ERRNO option.
Change-Id: I81d57a2e318c94c68eee913ae0d4ca3a3609c7a4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Removed old style file description and documnetation and apply
doxygen synatx.
Change-Id: I3ac9f06d4f574bf3c79c6f6044cec3a7e2f6e4c8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes the 'priority' parameter from the IRQ_CONFIG macro.
This parameter was not used anymore in any architecture.
The priority is handled in the IRQ_CONNECT macro.
The documentation is updated as well.
Change-Id: I24a293c5e41bd729d5e759113e0c4a8a6a61e0dd
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Adds static irq support for the Quark SE platform for the ARC core.
New linker sections and sw isr table initialization is needed to support
static IRQ.
Change-Id: I82af98a189f5a156e7f1018f3ecdbfa73ad3e6ef
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
IRQ_CONNECT_STATIC takes 6 arguments on other
architectures, but the ARC one had only 5.
Change-Id: I257e8db12582ee2d6f93bba63af9aa597197a53d
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Use device name to find the UART device for console usage, instead of
relying on an arbitrary index.
Change-Id: Iebe01c9bf392dfee6d8284367f67647f7d47561a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Rename nsim_uart.c to uart_nsim.c. This is to follow
the driver naming convention.
() Rename functions nsim_uart_*() to uart_nsim_*(),
following driver naming convention.
() UART ports initialization is moved into the driver itself.
All the init code in platform config files is removed.
() Adds (many) Kconfig options. These don't have to be defined
in each platform's board.h anymore.
Change-Id: If015f39a6f6b4fcc65625e6e5f973b4469202f54
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Renames ns16550.c to uart_ns16550.c. This is to follow
the driver naming convention.
() Renames functions ns16550_uart_*() to uart_ns16550_*(),
following driver naming convention.
() UART ports initialization is moved into the driver itself.
All the init code in platform config files is removed.
() Adds (many) Kconfig options. These don't have to be defined
in each platform's board.h anymore.
() Renames CONFIG_NS16550_* to CONFIG_UART_NS16550_*
() Disable NS16550 for ARC as no port is defined anyway.
Change-Id: I76bbe25b9bc75eb62df81e533f84f4f63a5257b7
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Uses the "trap_s" exception to simulate entry into IRQ context;
offloaded functions run on the FIRQ stack.
Change-Id: I310ce42b45aca5dabd1d27e486645d23fa0b118f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Benjamin Walsh