We needed to add support for the RV32M1_LPTMR_TIMER to the test so its
knows what the IRQ of the timer is.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
(Chunk 1 of 3 - this patch was split across pull requests to address
CI build time limitations)
Zephyr has always been a uniprocessor system, and its kernel tests are
rife with assumptions and outright dependence on single-CPU operation
(for example: "low priority threads will never run until this high
priority thread blocks" -- not true if there's another processor to
run it!)
About 1/3 of our tests fail right now on x86_64 when dual processor
operation is made default. Most of those can probably be recovered on
a case-by-case basis with simple changes (and a few of them might
represent real bugs in SMP!), but for now let's make sure the full
test suite passes by turning the second CPU off. There's still plenty
of SMP coverage in the remaining cases.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This board is unmaintained and unsupported. It is not known to work and
has lots of conditional code across the tree that makes code
unmaintainable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Rewritten Xtensa CCOUNT driver along the lines of all the other new
drivers. The new API permits much smaller code.
Notably: The Xtensa counter is a 32 bit up-counter with a comparator
register. It's in some sense the archetype of this kind of timer as
it's the simplest of the bunch (everything else has quirks: NRF is
very slow and 24 bit, HPET has a runtime frequency detection, RISC-V
is 64 bit...). I should have written this one first.
Note also that this includes a blacklist of the xtensa architecture on
the tests/driver/ipm test. I'm getting spurious failures there where
a k_sem_take() call with a non-zero timeout is being made out of the
console output code in interrupt context. This seems to have nothing
to do with the timer; I suspect it's because the old timer drivers
would (incorrectly!) call z_clock_announce() in non-interrupt context
in some contexts (e.g. "expiring really soon"). Apparently this test
(or something in the IPM or Xtensa console code) was somehow relying
on that on Xtensa. But IPM is a Quark thing and there's no particular
reason to run this test there.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When TICKLESS_KERNEL is enabled, the current time in ticks is based on
a hardware counter and not interrupt delivery (which is the whole
point of tickless), so irq-locking does not prevent time from
advancing. Disable this test in that configuration.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In the POSIX architecture, with the inf_clock "SOC", time does
not pass while the CPU is running. Tests that require time to pass
while busy waiting should call k_busy_wait() or in some other way
set the CPU to idle. This test was setting the CPU to idle while
waiting for the next time slice. This is ok if the system tick
(timer) is active and awaking the CPU every system tick period.
But when configured in tickless mode that is not the case, and the
CPU was set to sleep for an indefinite amount of time.
This commit fixes it by using k_busy_wait(a few microseconds) inside
that busy wait loop instead.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
This test was written to assume that on idle the CPU would wake up on
the next tick boundary because of the timer interrupt. No such
interrupt arrives in tickless mode and it hangs forever.
A more whiteboxy test involving setting a clock timout will have to be
written for this feature if we want to keep it on tickless systems.
Alternatively we could move this test out of tests/kernel/context and
always disable tickless.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The theory behind this test seems to be that taking an IRQ lock should
prevent the advance of the kernel's tick counter. That works on
traditional timers only. In tickless mode the timer hardware/driver
is expected to be able to give us an answer for time independent of
interrupt delivery, so the test fails spuriously. The "bug" detected
is a feature of tickless!
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The system tick count is a 64 bit quantity that gets updated from
interrupt context, meaning that it's dangerously non-atomic and has to
be locked. The core kernel clock code did this right.
But the value was also exposed to the rest of the universe as a global
variable, and virtually nothing else was doing this correctly. Even
in the timer ISRs themselves, the interrupts may be themselves
preempted (most of our architectures support nested interrupts) by
code that wants to set timeouts and inspect system uptime.
Define a z_tick_{get,set}() API, eliminate the old variable, and make
sure everyone uses the right mechanism.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
bat_commit is an old and obsolete tag that has not been maintained over
time and was supposed to serve a purpose that is obsolete now. Also
rename core tag with kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
On some architectures tick time cannot be expressed as integer
number of microseconds, introducing error in calculations using
sys_clock_us_per_tick variable.
This commit deprecates the sys_clock_us_per_tick variable and
replaces its usage by more precise calculations based on
sys_clock_hw_cycles_per_sec and sys_clock_ticks_per_sec.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The test was using ztest incorrectly exposing everything as one single
test function. We now have multiple tests that can be tracked back to
features and requirements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make it possible to run in other posix boards.
By default, if the POSIX board does not define the TICK_IRQ
just run without that part of the test, printing a note.
The place where other POSIX boards should define it, is also
clear, and should be easy to keep those lines free from merge
conflicts in the future.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
On some devices, when k_cpu_idle() was called we were getting
interrupts that were not the timer interrupt. On bbc_micro
a power clock control driver interrupt was happening instead
and k_cpu_idle() was returning without the system tick advancing,
failing the test.
The clock control interrupts seem to only happen early in device
boot; moving the idle test much later lets the test pass on this
board (and likely all other NRF5 based boards).
Issue: ZEP-2257
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The hard-coded value of 10ms doesn't take the system configured
amount of ticks per second, nor does it account for an unlucky
tick advance which causes the test to fail very intermittently
in QEMU.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I6c676bc6c5e850a8725785554cd535e32067f33e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
tests/kernel/context:
added test point to cover k_cpu_atomic_idle.
Jira: ZEP-1242
Change-Id: Id09c89fd367d527ea1087e6eb2bdba29a338ceaf
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
This option is added in order to support Xtensa, which needs more stack than
other architecture. This allows having a centralized way to change stack
requirements for all tests.
This extra stack size is eaqual to 0 for most architectures, except Xtensa
which requires additional 768 bytes for each stack.
Change-Id: Ie5dcae1dfd29018d36ef35dae22dc4c1a2ecdc14
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
riscv defines the machine-mode timer registers that are implemented
by the all riscv SOCs that follow the riscv privileged architecture
specification.
The timer registers implemented in riscv-qemu follow this specification.
To account for future riscv SOCs, reimplement the riscv_qemu_driver by
the riscv_machine_driver.
Change-Id: I645b03c91b4e07d0f2609908decc27ba9b8240d4
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
The for loop could exit with a out of bounds (variable j) value for
the delayed_threads array, we verify for the variable value before
operating on the array
This issue was reported by Coverity
Coverity-CID: 160078
Change-Id: I6aa1cc325cc363be48cd72b2a58d0a55ec3854bc
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Kumar Gala