QMSI is not updated to latest SPI API. Switching to native DW driver,
until we find a way either to update the shim drivers in a
non-performant way, or updating QMSI itself enabling support for
scatter-gather type of buffers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Currently, it seems that only boards with smaller amount of RAM
get a value for "ram" property, and very few boards have "flash"
defined. However, to test bigger sample applications, it's helpful
to have these properties universally defined.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
According to a conversation with @carlescufi and @finikorg, the
zephyr codebase should only use the Linux Foundation USB vendor
ID. The USB vendor IDs and product IDs in the board definitions
are an obsolete leftover from old code and no longer needed.
Signed-off-by: Iván Sánchez Ortega <ivan@sanchezortega.es>
We assumed that ${BOARD} and ${BOARD_FAMILY} are always the same and
thus interchangeable. That isn't always the case so use ${BOARD} proper
for when we mean the exact BOARD name we are building for vs the
BOARD_FAMILY.
We also add .dts files for board variants within a board family, such
that we have a .dts matching each board name.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move common SoC dts.fixup defines into arch/x86/soc/atom/dts.fixup so we
remove duplication in the boards and only have board specific defines in
boards/x86/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move common SoC dts.fixup defines into arch/x86/soc/ia32/dts.fixup so we
remove duplication in the boards and only have board specific defines in
boards/x86/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move common SoC dts.fixup defines into
arch/x86/soc/intel_quark/quark_se/dts.fixup so we remove duplication in
the boards and only have board specific defines in
boards/x86/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix Kconfig help sections and add spacing to be consistent across all
Kconfig file. In a previous run we missed a few.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
MinnowBoard has an uppercase "B" in its name. Also added a link to the
config option mentioned.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add a reference to flashing and booting so it can be used by minnowboard
and other boards.
Apply minor layout fixes.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some boards are supported natively by qemu. This option will allow us to
run tests using those platforms directly without having to go via a
dedicated qemu board definition.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to be able to document the build on Windows and UNIX
systems, slight variations are required on the app commands
that are used throughout the documentation system.
This includes getting rid of the prompt symbol and providing commands
for both UNIX and Windows operating systems.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Most boards enable the pinmux by default by setting CONFIG_PINMUX=y in
<board>_defconfig, but several boards did it in Kconfig.defconfig
instead. Several code reviews, such as #5043, have suggested using a
select in Kconfig.board to enable the pinmux, however this caused
warnings:
warning: (BOARD_LPCXPRESSO54114) selects PINMUX which has unmet direct
dependencies (BOARD_FRDM_K64F || BOARD_FRDM_KL25Z || BOARD_FRDM_KW41Z ||
BOARD_HEXIWEAR_K64 || BOARD_USB_KW24D512 || BOARD_GALILEO)
Fix how these boards enable the pinmux so they are more consistent with
other boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
quark_se_c1000_devboard already embeds a cc2520 which is a 2.4Ghz 15.4
radio chip. But if one want to try a sub-Ghz radio chip such as the
cc1200 on it, it will require to wire as this configuration expects it
to be done.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of accessing the environment variable ZEPHYR_BASE every time we
require accessing the source code root, use an intermediate variable
that has OS path separators correctly set to '/' to avoid issues on
Windows.
Note: This removes the ZEPHYR_SOURCE_DIR CMake variable. External
applications using that will need to change to use the new ZEPHYR_BASE
variable.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update board definitions with supported feature. This is temporary
until we have full coverage for device drivers in DTS, then we can use
DTS instead.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The build documentation for this board is misleading. It says to "set
JAILHOUSE_QEMU_IMG_FILE", *then* run cmake commands. But setting the
variable must be part of the cmake commands themselves. Fix it.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
The various runners (flash/debug scripts) use environment variables to
take arguments. This is legacy behavior which is not desirable.
Use command line arguments instead.
Note: this leaves more general environment variables with publicly
documented behavior in place for now, for compatibility, e.g.:
ZEPHYR_FLASH_OVER_DFU, OPENSDA_FW, ESP_IDF_PATH, PYOCD_DAPARG
For example, when using dfu-util to flash arduino_101, instead of
setting DFUUTIL_PID, DFUUTIL_ALT, and DFUUTIL_IMG environment
variables, have the script invocation look like this:
python3 .../zephyr_flash_debug.py dfu-util flash \
[common arguments omitted] \
--pid=8087:0aba --alt=x86_app \
--img=.../build/zephyr/zephyr.bin
Make similar changes for other runners (openocd, etc.) and
targets (debug, debugserver).
To implement this in the scripts:
- have the individual scripts/support/runner/some-runner.py files
register their own command line arguments
- teach them to construct instances from arguments, not the
environment
- have zephyr_flash_debug.py request runners to register command
line argument parsers, and handle arguments
In the build system:
- add a new board_runner_args() extension function that board.cmake
files can use to add to the zephyr_flash_debug.py command line
- adjust cmake/flash/CMakeLists.txt to invoke with arguments
- add new helper include files for each runner (like
boards/common/dfu-util.board.cmake, etc.), which add default
options as needed and then add on overrides from
board_runner_args() calls
- update board.cmake files to use the new includes and extension
This implied some tweaking when using openocd to make the CMake string
escaping and unescaping work properly.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
The Python-based runners have replaced the old shell scripts. Refactor
the build system accordingly:
- FLASH_SCRIPT is now BOARD_FLASH_RUNNER
- DEBUG_SCRIPT is now BOARD_DEBUG_RUNNER
The values, rather than being the names of files, are now the names of
runners in scripts/support/runner. They are still short, descriptive
names like "openocd", "jlink", "em-starterkit", etc.
Adjust the zephyr_flash_debug.py call and runner internals
accordingly. Have each runner class report a name and the commands it
can handle. This lets us move some boilerplate from each do_run()
method into the common run() routine, and enables further improvements
in future patches.
The handles_command() method is temporary, and will be replaced by a
more general mechanism for describing runner capabilities in a
subsequent patch. The initial use case for extending this is to add
device tree awareness to the runners.
To try to avoid user confusion, abort the configuration if an
xxx_SCRIPT is defined.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
During cmake migration the load image was not correctly set.
This was causing flash failures.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
For a lot of scenarios the isr stack was no longer enough.
Hence increased the stack size.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This is needed by platforms like jailhouse.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Signed-off-by: Gustavo Lima Chaves <gustavo.lima.chaves@intel.com>
We don't want to pollute core-infrastructure with board-specific code,
so we move the qemu discovery to after board.cmake has been executed,
and we introduce the overridable QEMU_binary_suffix CMake variable.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
"-serial mon:stdio" was already injected elsewhere, so remove
duplication. That argument, when coming from the common infrastructure,
also comes as one of the last ones. Because of that, the former "-serial
vc" was taking precedence and we were never seeing output on stdio.
Removing the virtual console altogether, for now, fixes that.
Finally, since cmake came in, we have to fix the path for the fsdev
argument to QEMU as well.
Signed-off-by: Gustavo Lima Chaves <gustavo.lima.chaves@intel.com>
Getting warnings from Kconfig after generalising how CPU_HAS_FPU is
configured on the architecture level. 2 Boards were settings this value
in the wrong place.
Fixes#5211.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The jailhouse board's build is currently broken.
It wants to depend on the qemu board's devicetree, but can no longer
do so since the board-level dts files were moved into individual board
directories.
To restore the build, insert the qemu_x86.dts contents into
x86_jailhouse.dts.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Not all boards require the various binary formats zephyr generates. So
be selective based on the arch, SoC or board and only geenrate the
binaries actually needed.
Fixes#5009
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
patch removes the mem.h and marcos used in that file are
moved appropriate board files. As there are boards with
different flash configuration but of same soc, flash and
ram size are moved to dts file instead of dtsi
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
The old way of constructing FLASH_SCRIPT_ENV_VARS was corrupting the
values that were passed to the flasher. This new method is the
standard way of creating a dictionary/hashmap in CMake and does not
suffer from the same problem.
This fixes
https://github.com/zephyrproject-rtos/zephyr/issues/4844#event-1334599401
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Move the dts files into the board dir so that board ports can be more
standalone. This will allow us at some point to have board ports
outside of the tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move the dts fixup files into the board dir so that board ports can be
more standalone. This will allow us at some point to have board ports
outside of the tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
The port will enable Zephyr to run as a guest OS on x86-64 systems. It
comes with a test on QEMU to validate that, thus this new board
introduction. It's "make run" target will issue QEMU with the same
configuration Jailhouse upstream uses for their confis/qemu-x86.c root
cell configuration:
Test configuration for QEMU Q35 VM, 1 GB RAM, 4 cores,
6 MB hypervisor, 60 MB inmates (-4K shared mem device)
This will work provided qemu-system-x86_64 is installed in the system
and a given (qcow2) image with the Jailhouse root cell in it is
provided (any of those will ever ship with Zephyr, it's out of its
scope).
Signed-off-by: Gustavo Lima Chaves <gustavo.lima.chaves@intel.com>
Replacing the default paging scheme from 32-bit paging to
PAE paging in QEMU.
JIRA:ZEP-2511
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Replacing the default paging scheme from 32-bit paging to
PAE paging in QEMU.
JIRA:ZEP-2511
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Page Address Extension(PAE) page tables make use of NXE bit in
EFER register.
This patch enables the capability needed to set this bit.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The IAMCU variant does not need to be the default, this calling
convention was to support the discontinued Quark platforms.
qemu_x86 and qemu_x86_nommu now are set as default.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This will run all tests with the memory management unit disabled.
This means no hardware-based stack protection or user threads.
qemu_x86_iamcu now runs with all MMU features enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Set Vendor and Product ID originally present in the firmware.
Implemented USB function is the same: CDC ACM serial port.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move all QEMU related defines to the boards and cleanup xtensa platforms
which were marked to be QEMU capable by mistake.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
patch add device tree support for develoement board of
quark_se_c1000. Previously pushed patch was flashing binary
at wrong address because of which UART was not working
Jira:ZEP-2459
test
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Some boards had HAS_DTS in the defconfig which is dropped if the Kconfig
variable does not have a prompt.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This will allow checking if we are building for QEMU globally, without
having to know the exact architecture and board name.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since HAS_DTS is always defined for arduino_101 the board specific
Kconfig bits associated with !HAS_DTS are never used, so lets remove
them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This will cause sanitycheck runs to finish more quickly
instead of sitting there waiting on a timeout. We already
do this with the Xtensa simulator.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
patch uses chosen property zephyr,bt-uart, zephyr,uart-pipe
and zephyr,bt-mon-uart to determine the uart instance to be
used for bluetooth,uart_pipe and bluetooth_monitor and generate
appropriate configs.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
We have lots of RAM, this helps catch bugs.
Enable XIP as well, this used to be turned on but was
shut off for some reason.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Previously we were instantiating QEMU with 32MB of RAM but
only enabling a small fraction of it.
Now we boot with 8MB of ram. We ignore the first 4K so we can
make that an unmapped paged to catch NULL pointer dereferences.
If XIP is enabled, the "ROM" region will be the first half of
memory, the "RAM" region the latter.
Move the IDT_LIST and MMU_LIST regions elsewhere so they don't
overlap the new memory arrangement.
Use !XIP to fix a problem where CONFIG_RAM_SIZE was set incorrectly
for XIP case.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This should be a default option for this board which would allow us to
remove it from many sample configurations that can be then used for
other boards.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Sidebar navigation for supported boards is wonky: opens to show
all boards (making for lots of scrolling to see the sidebar) and
sidebar items aren't always clickable (as explained in the JIRA
issue).
Fix is to not use multiple toctree directives in boards.rst and
create intermediate architecture-specific supported board docs.
JIRA: INF-132
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
patch adds necessary files and does the modification
to the existing files to add device support for
arduino_101 board.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Add board metadata to be consumed by the sanitycheck script to provide
better matching with testcases and to test based on features declated in
the board files.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some files have moved from their original location, or are no longer
available. For the mbedtls samples, tweak the link to point to a page
where links for current and previous downloads can be found.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Increase to 1024 to get more tests and sample running on this device
with only 8K of SRAM.
Change thread stack size in the mslab test to make it fit into this
board.
Jira: ZEP-2079
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
More general spelling fixes, and cleaning up stray UTF-8 characters
such as curly-quotes, em- and en-dashes. Use replacement strings
for |reg| and |trade|.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Enable it by default now that the eth_dw driver has been ported to the
new IP stack.
Jira: ZEP-1652
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Adds event based scheduling logic to the kernel. Updates
management of timeouts, timers, idling etc. based on
time tracked at events rather than periodic ticks. Provides
interfaces for timers to announce and get next timer expiry
based on kernel scheduling decisions involving time slicing
of threads, timeouts and idling. Uses wall time units instead
of ticks in all scheduling activities.
The implementation involves changes in the following areas
1. Management of time in wall units like ms/us instead of ticks
The existing implementation already had an option to configure
number of ticks in a second. The new implementation builds on
top of that feature and provides option to set the size of the
scheduling granurality to mili seconds or micro seconds. This
allows most of the current implementation to be reused. Due to
this re-use and co-existence with tick based kernel, the names
of variables may contain the word "tick". However, in the
tickless kernel implementation, it represents the currently
configured time unit, which would be be mili seconds or
micro seconds. The APIs that take time as a parameter are not
impacted and they continue to pass time in mili seconds.
2. Timers would not be programmed in periodic mode
generating ticks. Instead they would be programmed in one
shot mode to generate events at the time the kernel scheduler
needs to gain control for its scheduling activities like
timers, timeouts, time slicing, idling etc.
3. The scheduler provides interfaces that the timer drivers
use to announce elapsed time and get the next time the scheduler
needs a timer event. It is possible that the scheduler may not
need another timer event, in which case the system would wait
for a non-timer event to wake it up if it is idling.
4. New APIs are defined to be implemented by timer drivers. Also
they need to handler timer events differently. These changes
have been done in the HPET timer driver. In future other timers
that support tickles kernel should implement these APIs as well.
These APIs are to re-program the timer, update and announce
elapsed time.
5. Philosopher and timer_api applications have been enabled to
test tickless kernel. Separate configuration files are created
which define the necessary CONFIG flags. Run these apps using
following command
make pristine && make BOARD=qemu_x86 CONF_FILE=prj_tickless.conf qemu
Jira: ZEP-339 ZEP-1946 ZEP-948
Change-Id: I7d950c31bf1ff929a9066fad42c2f0559a2e5983
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I27d51c316144251939b20cfa6787ff7ab8035fe6
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
I2C_SHARED_IRQ, I2C_0_IRQ_SHARED, I2C_0_IRQ_DIRECT Kconfig options
are DW driver specific. Its presence is confusing for a user of any
other I2C driver than DW. This patch renames these options to include
DW string and makes it visible only for DW I2C driver. This is a
similar implementation to that used by ETH DW Ethernet driver.
Change-Id: I795506f9b103c028a22317df9ad632dce5cd1343
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
OPENOCD_PRE_CMD, OPENOCD_POST_CMD variables require adding
'-c' in front of an actual OpenOCD command. This is in contrary
to other OPENOCD_*_CMD varialbles which specify OpenOCD commands
directly. This patch aligns usage of various OPENOCD_*_CMD variables.
It is no longer required to add '-c' in front of OPENOCD_PRE_CMD,
OPENOCD_POST_CMD variables.
Change-Id: I276fab00b099694c83c3bf74aa5dd59c8d6a308b
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Now both flashing over DFU and JTAG are supported, however JTAG needs a
special connection, so DFU is the current out of the box supported
method for flashing.
Jira: ZEP-1785
Change-Id: I47ffce3b332b99ef6c6afdce2214709a4fa5b946
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
At the moment CC2520 configuration options are selected inside "TI
CC2520 Driver RAW channe" submenu like:
[*] TI CC2520 Driver support ----
[ ] TI CC2520 Driver RAW channel --->
Make RAW channel depends on TI CC2520.
Change-Id: I92879b7f4391f1842c012b6c03c78956e90b9441
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This builds the zephyr OS image with the proper flash offsets for
slot 0.
After building, the image needs to be signed using the zep2newt.py
script included in the MCUBoot repo:
./scripts/zep2newt.py --vtoff 0x200 --word-size 4 --sig RSA \
--key root-rsa-2048.pem --bin <path to zephyr.bin> \
--out <path to zephyr.bin>
And then run 'make flash'.
Change-Id: I4739c0b7912c8066882208cb450a8224d433965b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- Fix path to pinmux.c
- Fix note markup
- s/TTY-to-USB/TTL-to-USB/ ; s/adaptor/adapter/
- Recommend 3.3V TTL serial cable
- Consistent use of "Flyswatter2" official spelling
- s/UART0/UART1/
- Provide CONFIG_ARC_INIT relevant value
- s/for for/for/
- Consistent naming of JTAG 2x5 male pins as "micro JTAG header"
- s/orange/green/
- The Arduino 101 micro JTAG header connects to the Flyswatter2
via the ARM Micro JTAG Connector
- Consistent case
- $USERNAME is not set on Ubuntu, $LOGNAME is POSIX-compliant
- su requires root password, 'sudo su' only requires user password
- Exit root session when done creating udev rule
- Note: code-block above should be rewritten using 'sudo tee'
- s/X86/x86/
- Fix paths to i586-zephyr-elfiamcu-gdb and arc-zephyr-elf-gdb
- samples/hello_world does not set CONFIG_ARC_INIT=y, so suggest
using tests/booting/stub instead
- s/debugserver/debug server/
- s/BLUETOOTH_DEBUG_STDOUT/BLUETOOTH_DEBUG_LOG/
- s/bottle neck/bottleneck/
Change-Id: I4a76020f67d9672f59eae52f78c5caeb9e513aee
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Explain how to create the udev rules granting access to the
Arduino 101 board in DFU mode.
Explain the available methods to flash the Arduino 101 board:
either manually with dfu-util command line,
or automated with ZEPHYR_FLASH_OVER_DFU=y and 'make flash'.
Provide instructions for x86, ARC and BLE cores, using distinct
code-blocks for the manual and make-assisted methods.
Change-Id: I0f9fe3849dec3c2dc2249b77d31d4f2414c98331
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Let 'make flash' invoke the dfuutil.sh support script, and
export the relevant DFUUTIL_* environment variables, for all
3 cores of the Arduino 101 board: x86, ARC and BLE.
This is backward compatible with the current usage of OpenOCD
over JTAG, since this is only enabled when the environment
variable ZEPHYR_FLASH_OVER_DFU is set to y.
Change-Id: Ic5528cb87a180378d7120d150c27d1e24c9ebe75
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Though the SPI_CS_GPIO Kconfig entry (in drivers/spi/Kconfig) has
"select GPIO" specified, we are observing that merely adding
the symbol(SPI_CS_GPIO) in the
defconfig (boards/x86/arduino_101/Kconfig.defconfig)
is triggering unmet direct dependency warnings
(though the build goes through).
Since the defconfig entry(SPI_CS_GPIO) is not selecting
the aforementioned 'select' rule, we add it manually here.
Jira: ZEP-1668
Change-Id: Ida6a0c851462d747e6559bd0c78fa52e1d0f24b5
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
With the default of 192, the x86 rom will span from
0x40010000 - 0x4004000. However the default starting
ROM address for the ARC side is configured to be
0x40034000. If the x86 image is large enough it will
clobber the ARC code. Shorten the x86 side such that
its last flash address is 0x40033FFF.
Change-Id: I23987c3db11f0e51c2405b8baee114aee39de571
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This reverts commit b3a2fc287b.
The firmware on production board will have a faster Baudrate.
Change-Id: Ifa1abd4c2f882b8ef6e7d9762fc592524177dc48
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently the BLE modules on the Panther boards are configured to use
a 115200 baudrate.
Change-Id: I093db68c0fc172757b5878401b99ada7ae0c99d9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Panther is a board based on Quark SE C1000 SoC.
Change-Id: I66653c40efcb7e04748a21ea622debee23d7d6c0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit changes Kconfig prefix for ieee802154 drivers to
IEEE802154_*. This is done for consistency with config prefixes
used in other subsystems.
Change-Id: Ibbb4d96d2b748f4f13135bde85304ec34c5a90a6
Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no>
Add a label in the arduino 101 document for the flashing
bluetooth instructions, and link to that instead of the
wiki page (deprecated).
Change-Id: Ie39240cdf4881356f634d21ead1d7ae93ccd60a1
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Remove dev driver and integrate it in the default pinmux driver.
Jira: ZEP-958
Change-Id: I55670240f8a21749d3a6ae22e300e16ba80a2fb6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The headings on some .rst files were not following the expected
heading order of using # for h1, * for h2, = for h3, and - for h4
This patch fixes that, and the doc/templates/*.tmpl files created
for folks to use as templates for creating board and sample docs.
Change-Id: I0263b005648558d5ea41a681ceaa4798c9594dd9
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This will replace the current goal of 'make qemu' with 'make run' and
moves Qemu handling into its own file and into the boards instead of
being architecture specific.
We should be able to add new boards that support some other type of
emulation (by adding scripts/Makefile.<emu type>) and allow the board to
define their own options for the use type of emulation.
'make qemu' will still work, however it will be deprecated, starting
with this commit it is recommended to use 'make run'.
Jira: ZEP-359
Change-Id: I1cacd56b4ec09421a58cf5d010e22e9035214df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the existing debugserver target also for Qemu debugging. Qemu
should be maintained as one of many emulation/simulations platforms and
emulation should be abstracted in the Makefiles and not tied to Qemu.
qemugdb will still work, it is however being deprecated.
Change-Id: I0cd10fb66debb939b8f7f1304bf2ef4605da6a1d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Disk IO functions are used by both FS and USB Mass Storage.
This patch refactors those from FS directory to a separate one.
In addition existing, config options were modified to make
stuff meaningful.
Jira: ZEP-1276
Change-Id: Ia2a2e18f3dbbbdb964c3dc0427d8138ad86134cd
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Tomasz Bursztyka