Removed TID implementations wherever it is not required as per
Bluetooth SIG Mesh Model Specification. Removed unnecessary
comments. Add status code value to get publish along with
Light Lightness range status message.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Update message handlers & correct nubmber of bytes that every
handlers should fetch for their further processing as per
Bluetooth SIG Mesh Model Specification.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Make corrections in state binding of Servers as per Mesh Model
Specifications. Previously, when OnPowerUp state equal to 0x02,
then Light Lightness actual state was not assign to last power
down value. Plus when Generic OnOff state changes by client,
then Light Lightness Actual state value get assigned as Light
Lightness Last value instead of default one.
All these issues has fixed here.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
This is a application demonstrating a Bluetooth mesh node in
which Root element has following models
- Generic OnOff Server
- Generic OnOff Client
- Generic Level Server
- Generic Level Client
- Generic Power OnOff Server
- Generic Power OnOff Setup Server
- Generic Power OnOff Client
- Light Lightness Server
- Light Lightness Setup Server
- Light Lightness Client
- Light CTL Server
- Light CTL Setup Server
- Light CTL Client
- Vendor Model
And Secondary element has following models
- Generic OnOff Server
- Generic OnOff Client
- Generic Level Server
- Generic Level Client
- Light CTL Temperature Server
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
With updates to bt_gatt_notify and bt_gatt_indicate it is now possible
to pass the Characteristic attribute instead of its value which makes
the code able to verify if attribute properties are set correctly.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Test ArgonKey board. It provides an example of how to test
all the sensors on-board. It currently enables by default
following sensors:
LPS22HB pressure/temp
HTS221 humidity
LSM6DSL accel/gyro plus LIS2MDL magn connected to it.
VL53L0x proximity
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Minimal driver for ILI9340 LCD display driver including support
for adafruit 2.2" LCD display (1480)
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Use zephyr-app-commands for portability instead of assuming Make and
Unix, and add a missing "run" goal.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
This ensures the every characteristic has a value attribute declared
with the same UUID since the old macro did not declare the value the
application would normally have to declare one itself using a different
UUID which is not allowed.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Keeping the model struct same sized, change the element pointer to two
indexes, and add a flags member that will be used to track pending
storage actions.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add hardware dependencies and filters to make sure we do not explode if
for example we try to build a sample/test using rtc when the platform
does not support that.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test prints out to the console, when testing on real hardware,
parse output and compare to what we are expecting to avoid timeouts.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some device include a temperature sensor, usually used as a
companion for helping in drift compensation, that measure the
die temperature. This temperature IS NOT related to the the
ambient temperature, hence a clean separation between the two
is required.
This commit introduces a clean separation between the two
types of temperature leaving the old deprecated definition
still there.
The list of current drivers that read the die (and not the ambient)
temperature is the following:
- adxl362
- bma280
- bmg160
- bmi160
- fxos8700
- lis3mdl
- lsm6ds0
- lsm6dsl
- lsm9ds0
- mpu6050
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Convert the mesh code to use the new net_buf_siple APIs. This has the
benefit of saving 4 bytes off the stack due to the not needed pointer.
Also update the publication context helpers to map to the new
net_buf_simple API in an intuitive way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Application should normally declare a bt_uuid with proper type and then
use bt_uuid_cmp.
Fixes#5162
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Two docs listed in the Samples an Demos TOC had the same title displayed
in the board-specific samples section, "Power Management Demo". Give
both sample docs a more specific title.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Based on the discussion in #5693, the reason why humidity was defined
in milli-percent was likely following Linux which defines it as such
in its sensor subsystem:
http://elixir.free-electrons.com/linux/latest/source/Documentation/ABI/testing/sysfs-bus-iio#L263
However, Linux defines temperature in milli-degrees either, but
Zephyr uses degrees (similarly for most other quantities). Typical
sensor resolution/precision for humidity is also on the order of 1%.
One of the existing drivers, th02.c, already returned values in
percents, and few apps showed it without conversion and/or units,
leading to confusing output to user like "54500".
So, switching units to percents, and update all the drivers and
sample apps.
For few drivers, there was also optimized conversion arithmetics
to avoid u64_t operations. (There're probably more places to
optimize it, and temperature conversion could use such optimization
too, but that's left for another patch.)
Fixes: #5693
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
A few lines earlier the code bails out in case len is 0. Checking for
buf->len < 1 is the same as checking for buf->len == 0. Since len is
guaranteed to be > 0 here the check len > buf->len implicitly checks
for buf->len == 0, i.e. the second test can be removed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Depending on a path inside the Zephyr tree to determine if we are a test
does not scale. Also some samples were marked as TEST while they are
not, just to get some options defined for tests.
Idenitfying a test will be addressed in another patch introducing
CONFIG_TEST.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove build_only and add harness type needed for the sample/test to
allow running with sanitycheck and on devices once we have harness
support.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It is only necessary to link with subsys__bluetooth if the path
"subsys/bluetooth" is needed as an include directory. None of the
samples have this need.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Signed-off-by: Steve Brown <sbrown@cortland.com>
---
The updates to BlueZ' meshctl have not been submitted.
I am submitting this PR only for review. It could be committed
after the patches for the meshctl commands are applied.
Increase sleep time for main thread (1 sec to 1 minute) to keep SOC
in Low Power State for longer time. Currently nrf SOC is entering into
low power state and exiting immedately after 1 sec.
With this change SOC will wake stay in Low Power State till GPIO is
pressed or sleep time expired (whichever is earlier).
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
For an unknown reason, various samples in KBuild were including
Makefile.test, this had some desired benefits, one of which is that
the popular BOOT_BANNER appears. The CMake-equivalent of including
Makefile.test is setting the flag IS_TEST. This commit reverts the
behaviour of the samples back to how it was pre-cmake.
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
This sample tesecase provides sample code :-
1. Triggers Low Power tasks into nrf52 SOC (CONST LAT and LOW PWR)
2. Triggers System Off state.
3. Wake up device through port Event by GPIO (Button 1).
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
The code was causing only one byte of data to be placed in timeout
instead of sizeof(timeout) as intended.
Coverity-CID: 170744
Fixes#4057
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Upcoming memory protection features will be placing some additional
constraints on kernel objects:
- They need to reside in memory owned by the kernel and not the
application
- Certain kernel object validation schemes will require some run-time
initialization of all kernel objects before they can be used.
Per Ben these initializer macros were never intended to be public. It is
not forbidden to use them, but doing so requires care: the memory being
initialized must reside in kernel space, and extra runtime
initialization steps may need to be peformed before they are fully
usable as kernel objects. In particular, kernel subsystems or drivers
whose objects are already in kernel memory may still need to use these
macros if they define kernel objects as members of a larger data
structure.
It is intended that application developers instead use the
K_<object>_DEFINE macros, which will automatically put the object in the
right memory and add them to a section which can be iterated over at
boot to complete initiailization.
There was no K_WORK_DEFINE() macro for creating struct k_work objects,
this is now added.
k_poll_event and k_poll_signal are intended to be instatiated from
application memory and have not been changed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The worst-case maximum number of CCC entries we need is actually
MAX_CONN + MAX_PAIRED. Provide a helper define for it and use it
whenever appropriate.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Vikrant More