The new name better reflects that this file contains all private
nanokernel APIs that are used by various kernel subsystems.
Change-Id: I4c258d582e93753eec9e575fdb5f9f2109417a0f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The new name better reflects that this file contains all private
microkernel APIs that are used by various kernel subsystems.
Change-Id: I5e52172a9e33aa130ce55ce59e887bba5c1c175a
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The new name better reflects that this file contains private
microkernel APIs (types, structs, etc.) that are used by various
kernel subsystems.
Change-Id: I7a89be893455b3daaf30baa40a0ec8e0cde7cc36
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Make device drivers use static interrupt registration procedure.
DYNAMIC_INT_STUBS configuration parameter was used only by device
drivers to switch between static and dynamic interrupt registration
procedures. Now it is obsolete and is removed.
uart_int_connect() function is removed. If UART device driver still
needs to register interrupt dynamically, it should use
irq_connect(uart_irq_get()).
Change-Id: I80c695f337456e9b0c1b0fd56716e35794f7bdb7
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In order to provide the same irq_connect() on all platforms
on x86, irq_connect() now uses a static array of interrupt
stubs. Device driver does not need to provide interrupt stub
to irq_connect() function.
Add NUM_DYNAMIC_STUBS configuration parameter, the number
of interrupt stubs used for dynamic interrupt registration.
Modify tests for unified interrupt register API
Tests that deal with interrupts are modified to work
with the new interrupt registration API.
Add CONFIG_NUM_DYNAMIC_STUBS option to dynamic interrupt projects
Projects that use dynamic interrupt handler registration on x86
have to include CONFIG_NUM_DYNAMIC_STUBS parameter in the
configuration.
Change-Id: Ic90c726485521a57cf695fd3edc8cac85d0b827d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
IRQ_CONNECT_STATIC() macro provides static interrupt registration.
It creates an entry for _sw_isr_table, table of interrupt handlers.
IRQ_CONFIG() macro provides interrupt controller configuration.
On ARM platform it configures the priority of each interrupt.
_sw_isr_table is implemented the way that each of it's elements
is located in individual section. Sections are marked a "linkonce",
thus when a device driver declares an interrupt handler, it overwrites
the default _sw_isr_table entry.
Change-Id: I182bf7158dd67f45b597783dca038a4f78166a03
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In order to simplify x86 interrupt stub creation, each interrupt
controller implements an interrupt stub definition macro.
Add IRQ_CONNECT_STATIC() for static interrupt registration, and
construct the interrupt stubs name from device and interrupt
handler names.
Add IRQ_CONFIG() macro for the interrupt controller configuration.
On x86 platform it programs APIC to associate an IRQ number with
the interupt vector.
Add HPET_TIMER0_INT_PRI parameter to Quark platform header to
make it build correctly.
Change-Id: I24ad25e1aa807ffa63733a27ad882877fcad72af
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Makes the ARM CPU type a choice between CPU_CORTEX_M3 and CPU_CORTEX_M4
(similar to the choice of processor for x86). This completes the breaking
of the forced selection of CPU_CORTEX_M3 when CPU_CORTEX_M4 chosen, thereby
making CPU_CORTEX_M3_M4 the true umbrella option for the Cortex M3/M4
processors.
Change-Id: I1d1f39352d85a5848b13102ceb8365c7dede0959
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Makes name more consistent with other CPU_CORTEX_M* options.
Change-Id: I65968cb300207ba0de6231d9a67f2720be77b6ba
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Makes name more consistent with CPU_CORTEX_M3_M4 option.
Change-Id: I6f0a14322b7774df54a3459f91cd3acf07819b04
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Makes name more consistent with CPU_CORTEX_M3_M4 option.
Change-Id: I0b89a50a5c0b728167cd76219d25ddf98243c0dd
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
CPU_CORTEX_M3_M4 replaces CPU_CORTEXM3 as the umbrella option for Cortex M3/M4
processors.
NOTE: Selecting CPU_CORTEXM4 still currently forces the selection of
CPU_CORTEXM3. Breaking that forced select will be done in a later commit.
Change-Id: I0f36b3a2adc5c6c66db4e9b6353b921199544deb
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Quark is the preferred target platform for the x86 architecture.
Change-Id: I2bf9bf209a85c93e38ea554e19de3f32813c3a69
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Atom based BSPs now select an atom processor.
Change-Id: Iebe90a60d9e7f2025ce6b23fe918b86cd11fdea7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The type of the handler variable was missing, causing compile failures.
Change-Id: I33c0f8d2893de0c6ad14f33ecb03b106c87cf758
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Some files were left in bsp/ after a failed rebase.
Change-Id: I26d34387d751ddd831b2dfef5c8cb6a1a8904b3c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
s_NANO contains the timeout queue, and each ccs needs a struct
_nano_timeout object that gets linked in the nanokernel timeout queue.
Change-Id: Iad027eaaebcffe190e95f0b9d068f047062559c2
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
After moving the driver code out of the bsp directory all the code
that remains is common to all x86 platforms move the code and
assocoated config variables to arch/x86.
Change-Id: I76617070bb165fd157f0c3a127f1b9829b86c283
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
This commit set back .S as the assembly code extension for Kbuild.
Change-Id: Ib0119876bd0bed6617bbfbad2ca6a44e172ab042
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
- Use Zephyr OS instead of Tiny Mountain
- Update with latest config options and values
Change-Id: I64084c37ce28b25587462468de86e4a904749433
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since the system generator pre-registers K_ticker as the handler
for the system tick event, there is no need for the timer driver
to re-register it at run time.
Change-Id: I7f20c19e5c6ccc7dfb6117aa2d2647b9dec0e549
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This driver is a very simple UART driver that can be used to implement
a protocol in application. It has no protocol logic and just allow
application to receive and send data over UART in platform independent
manner.
API is designed to minimize number of required memory copies.
Application is able to provide new buffer every time it decides to
consume received data. It is also able to just alter offset and
reuse current buffer eg if data was corrupted or otherwise invalid.
Change-Id: I8d3827fe2e242196e986d0419bc5487357481558
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
The file extension indicates a "Microkernel DEFinitions" file,
and no longer reflects the obsolete VxMicro/Viper branding.
Change-Id: Ib95b271404a4a4737e851d603c371244fa609e4d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates references to the obsolete OS name. In most cases the
name is simply removed, as it isn't necessary.
Change-Id: I32f9e7390e436aec008a9454b72657e129d65152
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of references to the obsolete OS name. (Note that removing
the build system comment entirely makes sense, since there are no
other comments for anything else in the file.)
Change-Id: I4473b016c1c85be48ac9ab8d5b8f6a5b11dd58d0
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The atomic_get() function is a read-only API which doesn't modify the
value given to it. The input parameter should therefore be declared as
const.
Change-Id: I084b7beb623610412f9237fc9dae6139580e2636
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Eliminates duplication of these entries by the various architecture-
specific include files for private nanokernel APIs.
Change-Id: I711c3b42fe375d1574ce4a540142c3b507b71557
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Introduces nano_internal.h, which will declare all architecture-
independent non-public nanokernel APIs. This file is automatically
incorporated by the various architecture-specific include files
for non-public nanokernel APIs, and will not normally be included
directly by any other files.
Change-Id: I9f3de812a5747cc720fa0ff739007315e8d07dd9
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
1) Renames routine to conform to kernel naming conventions.
2) Relocates routine declaration to include files for
non-public nanokernel APIs.
3) Relocates routine definition so that it resides with the
nanokernel's other fiber manipulation routines.
4) Eliminates an unnecessary argument to the routine.
Change-Id: Ia139280dfea36262ca8417708786b4989f3eaee1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
These now appear in the files which declare other non-public
nanokernel APIs.
Change-Id: Iea01d6de44851a08b308004b2c3104c08b020970
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of places where there is no need to include these files
at all, or places where these files are being indirectly included
due to the inclusion of nanokernel.h.
Change-Id: I7b58148af454b977830c00a6b519a78d0595603b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This commit add the symbols CONFIG_RANDOM_GENERATOR
to the default configurations.
Change-Id: Iff0e5a7d144993bf1cc9967bcffff037333cdf30
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Gets rid of single-line comments required by a previous set of
coding conventions. These comments provide no value to readers
and just clutter things up.
Change-Id: I2a08b12cf5026253de56979efdfc510e7e68defe
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Revises kernel so that it uses the standard NULL symbol defined
for C99, rather than having its own custom symbol.
Change-Id: I74342f192e95899a83db879e8b1c8fe89ac8b92d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Closing comments to two CONFIG_MICROKERNEL ifdef blocks incorrectly identified
the ifdef block as NOT belonging to the microkernel.
Change-Id: Iee415e33d7f8a88c41009c5783b37da3a431461b
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Instead of initializing the stack (when INIT_STACKS is enabled) in start_task()
and _fiber_start(), do it in _NewContext(). This helps to both reduce code
duplication AND ensure that all contexts get an initialized stack (previously
the background/idle task's was missed).
Change-Id: If2d50309d2be48fac937f5d0ae96b9de185c0fe2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This commit sets Execute in Place (XIP) option
as a default for CortexM architectures.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Ib9bd361a9ac6c64d9755c6bf3ac5c8df6c1b22f2
According to section 3.7 of Documentation/kbuild/makefiles.txt, using
EXTRA_CFLAGS in Makefiles is "still supported but their usage is
deprecated." However, using make EXTRA_CFLAGS="-DSOMETHING" results in
EXTRA_CFLAGS from Makefiles being overwritten, obviously breaking the
build. This patch converts to them to the newer ccflags-y which also
fixes the problem.
Change-Id: I6309439599d4c9cc184f9ecd941bde841982ef07
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since the address of the new context is known before _NewContext() is invoked
(due to it being passed a properly aligned stack), there is no longer any
need for _NewContext to return the pointer to the context.
Furthermore, as a direct result of the properly aligned stack, the pointer to
the new context does not need to be passed as a separate parameter since it
will always match the passed stack pointer.
Change-Id: Ie57a9c4ad17f6f13e8b3f659cd701d4f8950ea97
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Allan Stephens