Remove float option from 'max' configuration and add a new
'float' test for hardware that supports floating point.
Move configuration files into directories to ease maintenance.
Change-Id: Ibf4c88ea946a78b8025bc61409b0ab661250f4fb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The default number of IRQs is good enough for this sample.
Change-Id: I00f2088b4c82d60717563e36ebccfecac3983522
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This application reads the 'WHO AM I' register from a LSM9DS0
sensor connected over SPI.
Change-Id: I7b0631e9bc783aea60fdb489f40058e0c15275fb
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test builds the syncronisation app using the following config
options to verify if the build is successful:
- CONFIG_DEBUG
- CONFIG_NEWLIB_LIBC
Change-Id: Idf2fe948ab58982244b3590da938a83206103be3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds code to the gpio sample apps to run on Arduino due,
using the gpio_atmel_sam3 driver.
Change-Id: Ida16ceeabf55eb7efedc94c56ff875d8fad6456d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This renames the gpio_dw sample app to gpio, as this can be used
for multiple drivers.
Change-Id: I6f21237b5b8df10f531e47ad9f75cadfd619cd34
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Introduce new UUID API with bt_uuid, bt_uuid_16 and bt_uuid_32
structs. The specific size structs are derived from the common bt_uuid
struct to make it possible to use CONTAINER_OF().
Change-Id: I9cb03c73406acb7768d410fdf29eae75d252163c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_l2cap_chan_send does actually return the number of bytes sent.
Change-Id: I862a8519c752c6b26250a21be02a927a9326617c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Now that nble driver is supported bt_enable cannot be called blocking
since it is not supported, futhermore the call to bt_gatt_register
should be done after bt_enable is complete.
Change-Id: I404f8cd8b8339dba0fd26d24edeb718eba4bf225
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables this test case for arduino_101 platform.
Change-Id: I2a94fb90f4c57022ddf1ec11ab06bb5e59de9b6e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Board already defined in platform_whitelist
Change-Id: I2fed4b3c0663fd15d43ee697837a89439f7bd07a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Don't use NULL pointer if aquiring net buffer failed.
Change-Id: I11a22b832d1da9559b90abe0cb83eed56d14722f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds conversion of advertising data (adv_data) to be used by
bt_le_adv_start function.
Change-Id: I403ff7ebed89dbf763d258b5dcdabfbb2cb68260
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Test can be verified with
$ sanitycheck -s bluetooth/shell/test_nble -v
arduino_101 bluetooth/shell/test_nble PASSED
Change-Id: Icfc5892524041d169973bd6eb7d23b6ecffb98fc
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix compiler errors when CONFIG_BLUETOOTH_BREDR is not enabled.
Change-Id: I003985a9769120b3314eaf1b9563a3bf9712e32a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move buf_data to the place it is used reducing errors when dynamic
channels are disabled.
Change-Id: I82f640ffa8046e1c9b5805658e69cb722856d445
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This reuses the existing code since that is not driver specific, with
this samples such as tester can be build using nble driver.
Change-Id: I6d9f3edf8deb2e84fce233ef02d1cd0ad6f52526
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Current quark_se target is not specified in
scripts/sanity_chk/arches/x86.ini list and apparently this is the
reason tests were not executed, change it to arduino_101.
Change-Id: Ifedcf08cc9b25839d389bd7eb92ed42012e9075a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Putting right target allows to build for arduino_101.
Change-Id: Ib11244c7f024c72f0ab0b15549be57c576bdef3c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Currently it is not possible to build for Arduino since wrong platform
was specified.
Change-Id: I85ff6f5adb003db9a0905d6afa04bb5dfbd55d53
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In addition to having a different CONF_FILE bt_enable needs to be given
a callback since nble driver cannot block while initializing.
Change-Id: I8bd2c79d0620e93dbecfef25c49c5529ff1ee954
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move BLE configuration to board and enable GPIO for NBLE.
Change-Id: I99c309656430936edf6766fc99fe83b011801bb4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It's not a function and requires all its arguments to be build-time
constants. Make this more obvious to the end user to ease confusion.
Change-Id: I64107cf4d9db9f0e853026ce78e477060570fe6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is the last step before obsoleting DEVICE_DEFINE() and
DEVICE_INIT_CONFIG_DEFINE().
Change-Id: Ica4257662969048083ab9839872b4b437b8b351b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_DEFINE() so that it fits in the 'device' namespace.
Change-Id: I3af3a39cf9154359b31d22729d0db9f710cd202b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_INIT_CONFIG_DEFINE(), because (a) it was not fitting
in any namespace and (b) it is not used to declare, but rather define a
object.
Change-Id: I1da5822f06b85a9fb024b5b184afd0ccc01012ec
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Test works for ARM, but not testing sys_mem_safe_write_to_text_section()
since base ARM image are XIP images.
This test could be enhanced to boot a secondary non-XIP image for ARM
to test writing to .text.
Change-Id: I56aef68afabe88588b61c273901491de0c24a39b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Applies '__stack' tag where necessary to ensure that stacks are
properly aligned.
All stacks must be properly aligned via the '__stack' macro tag.
Change-Id: Icfb04e246bd97b2185bb05e63647c7ab01993e36
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
A dummy test to verify SPI driver and API build properly.
Change-Id: Icb1ab282b4a0fa02ec949c96becdfdc16f20bc2d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Introduce the GPIO QMSI-based implementation. This is basically a
shim layer that implement's Zephyr's GPIO APIs on top of QMSI drivers.
This is an alternative driver that conflicts with the previous
GPIO_DW implementation. In order to enable it you must set:
- CONFIG_GPIO=n
- CONFIG_GPIO_QMSI=y
- CONFIG_GPIO_0=y
- CONFIG_QMSI_DRIVERS=y
- CONFIG_QMSI_INTALL_PATH="PATH_TO_QMSI"
Note that this driver currently only supports one controller instance,
GPIO_0. It is implemented this way due to a limitation from the current
version of QMSI. QMSI versions later than 1.0 doesn't have this
limitation.
Missing:
- support multiple controller instances (gpio_0, gpio_1, etc);
- enable level triggered interrupts in sync with system clock,
through setting INT_CLOCK_SYNC properly.
Change-Id: Ib61b153dae9741806a9a31d7dc1f82b96d000fbe
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
- Sample application now pulls data continuously.
- Adds information on the arduino analog input pins and ADC channels.
- CHANNEL is defined as a macro.
- BUFFER_SIZE is defined as a macro.
- Sets the sample to run on repetitive mode on ARC architectures
(applies to Arduino 101 ADC).
Change-Id: I6201fea3a98b5394c05eb3ac570793629431ac02
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Quark SE SS provides 2 valid GPIO controllers, thus enabling the built
test case for it.
Change-Id: I46c6ceb3d4fe78a87c095e24851d289720524a9c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We can save a great deal of RAM this way, it only needs to be
in RAM if dynamic interrupts are in use.
At some point this config option broke, probably when static
interrupts were introduced into the system.
To induce build (instead of runtime) errors when irq_connect_dynamic()
is used without putting the table in RAM, the dynamic interrupt
functions are now conditionally compiled.
Change-Id: I4860508746fd375d189390163876c59b6c544c9a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is a sample app to interface with TI INA219 power monitor.
The values used in the app are for use on Adafruit's breakout board
(https://www.adafruit.com/products/904).
This assumes the slave address is 0x40, where A0 and A1 are all
tied to ground.
Change-Id: I4116629171a98be6f2b9aa422dd3eb386b4d59c2
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is being removed for a few reasons:
- AFAICT this is the only API in Zephyr that follows an allocate/free
model.
- There are no public APIs in the interrupt subsystem for releasing
or reconfiguring an interrupt. This code was relying on arch-specific
private APIs. If we really want to keep this capability we should
make these APIs public and consistent across arches.
- The use-case for this API is not clear, as Zephyr is not intended
for hot-pluggable peripherals. Built-in hardware tends to need its
interrupt for its entire life cycle.
- The current implementation of dynamic interrupts on x86 does not
support freeing a dynamic IRQ that was reserved with
irq_connect_dynamic(), causing this code not to work. To add this
would require reimplementing _get_dynamic_stub() to use a bitfield
or set of bitfields to track unused stubs rather than the simple
counter it uses now.
Change-Id: I7a03c134fb3498b91a1816318a88b293e26b846c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
nble sample is a copy of peripheral sample which now has support for
testing nble driver so a dedicated application just for that is no
longer needed.
Change-Id: Ia8ea2262fc2472a54c81b90eb86d9c0d4b12f42d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a test case that passes prj_nble.conf as CONF_FILE so that
the same code tested using HCI Bluetooth driver is also tested using
NBLE driver.
Change-Id: Ia4ad59d74b82c02007c55ea4fa8f53833d7a7fe5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Anas Nashif