Corrected spellings in printk messages plus removed
unnecessary blank lines.
In case of Gen. Move client's message to Server, reduced
values of delta & transition time to improve demonstration.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Removed unnecessary global variable & replaced them with different
variable defined in struct light_ctl_state.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Removed redundant coding which was related to old implementation.
Now Server will publish the new state information to the model’s Publish
Address only when there is mismatch between target & current values.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
For Genric OnPowerUp equal to 0x02 (Restore):
If a transition was in progress when powered down, the element
restores the target state when powered up. Otherwise the element
restores the state it was in when powered down.
This commit implements above mentioned logic.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Use the int_literal_to_timeout Coccinelle script to convert literal
integer arguments for kernel API timeout parameters to the standard
timeout value representations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This change is done so that there is no need to additionaly include
<nrfx.h> before <soc/nrfx_coredep.h> (what might be a bit surprising)
and so that <nrfx_config.h> doesn't need to be include separately for
nRF SoCs requiring a special mapping of peripheral accessing symbols.
This commit removes also no longer needed inclusions and updates
the hal_nordic module with required minor correction of nrfx_glue.h.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
We use the following commands to rename any
LED._GPIO_{CONTROLLER,PIN,FLAGS} to
DT_ALIAS_LED._GPIOS_{CONTROLLER,PIN,FLAGS}
git grep -l LED._GPIO_CONTROLLER | xargs sed -i 's/LED\(.\)_GPIO_CONTROLLER/DT_ALIAS_LED\1_GPIOS_CONTROLLER/g'
git grep -l LED._GPIO_PIN | xargs sed -i 's/LED\(.\)_GPIO_PIN/DT_ALIAS_LED\1_GPIOS_PIN/g'
git grep -l LED._GPIO_FLAGS | xargs sed -i 's/LED\(.\)_GPIO_FLAGS/DT_ALIAS_LED\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce a separate buffer pool for events which the HCI driver
considers discardable. Examples of such events could be e.g.
Advertising Reports. The benefit of having such a pool means that the
if there is a heavy inflow of such events it will not cause the
allocation for other critical events to block and may even eliminate
deadlocks in some cases.
Also update all mesh samples not to specify explicit RX buffer counts
anymore. Instead, create appropriate defaults in Kconfig so that we
only need to override this in the app for cases like the bbc:microbit
with limited memory.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We use the following commands to rename any
SW._GPIO_{CONTROLLER,PIN,FLAGS} to
DT_ALIAS_SW._GPIOS_{CONTROLLER,PIN,FLAGS}
git grep -l SW._GPIO_CONTROLLER | xargs sed -i 's/SW\(.\)_GPIO_CONTROLLER/DT_ALIAS_SW\1_GPIOS_CONTROLLER/g'
git grep -l SW._GPIO_PIN | xargs sed -i 's/SW\(.\)_GPIO_PIN/DT_ALIAS_SW\1_GPIOS_PIN/g'
git grep -l SW._GPIO_FLAGS | xargs sed -i 's/SW\(.\)_GPIO_FLAGS/DT_ALIAS_SW\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move gpio.h to drivers/gpio.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move stats.h to stats/stats.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This updates all client modules to const char processing of
setting names.
Update of peripheral_dis sample
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
This allows setting a custom pointer to be passed back to the complete
callback at expense of increasing the buffers in 4 bytes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Synchronising the init procedure to initialise the mesh
state only after the settings have been loaded.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
After receiving Generic Level Move set/set_unack message, generic
level state should move towards positive or negative extreme end
(which is depend upon sign of delta value) till it not get interruped.
This commit has introduced this feature.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
If Node Lightness is in downward transition & received Generic
onoff message to set state equal to 1 then Node transaction get
stopped in between. Ideally it should reach to default lightness
value if it is non-zero. This commit has solved this bug.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
This commit upgrade the implementation to reduce complexity in
algorithm. Previously there was different timers for lightness
as well as temperature transitions. But at time only single
transition is remain activated & hence there is no need
of multiple timer for each entiity.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
settings_read_cb is defined to return ssize_t and not size_t. This
also eliminates several Coverity warnings.
Fixes#15765Fixes#15768Fixes#15771Fixes#15774Fixes#15778
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Major changes are:
- Expose settings backend API to enable custom backend support.
- Add a new CONFIG_SETTINGS_CUSTOM backend to allow registering a custom
backend.
- Change api of the handlers h_set() routines to allow for
backend-specific read callbacks.
- Provide a customizable settings_backend_init() routine for custom
backends.
- Move runtime settings support to be its own backend.
Signed-off-by: François Delawarde <fnde@oticon.com>
This commit enable Bluetooth SMP Service which will help
us to do Device Firmware Upgrade over thr air. By default
it is not enable.
Reference: $zephyr/samples/subsys/mgmt/mcumgr/smp_svr
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Overhaul the Bluetooth documentation to split it into manageable units
and include additional information, such as architecture and tooling.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
A new role :zephyr_file: is available that renders to a link to the file
or folder in GitHub. Find appropriate references using :file: and
convert to :zephyr_file: to take advantage of its linking capability.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add missing CONFIG_GPIO required by the nRF52 board-specific Bluetooth
Mesh On/Off application sample.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
With this commit, it is now possible that if (for e.g.) lightness
transition is interrupted by temperature transition (which could
be instantaneous or non-instanstaneous) then as soon as temperature
transition get over, then algorithm would achieve target value
of lightness.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
If Client send transition time values as 0x40 or 0x80 or 0xC0 then
this was cause the behind divide by zero exception during calculation
of transition->counter. This PR will solve this bug.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
This sample is linking the 'app' with 'subsys__bluetooth', which will
add zephyr/subsys/bluetooth to the include path of the app. But this
is unnecessary as the app already has this path on it's include path.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
If Server receives re-transmitted message then it will not
transmit corresponding publish message for it.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Added app_gpio.c & no_transition_work_handler.c to reduce
burden on main.c. It will simplify & help to understand
overall architecture.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Simplified algorithm behind states binding & target values calculation.
This has improved code readability.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Now if Server receives re-transmitted messages from client then
it will not get completely ignored but respective GET & Publish
message will get release from Server side.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
As per Mesh Model Specification,
when a Server receives a Set message or a Set Unacknowledged message,
it shall set the state to the target field of the message,
unless the message has the same values for the SRC, DST, and TID
fields as the previous message received within the last 6 seconds.
This commit take care of this requirement.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
This commit's implementation update Vendor Model dummy response
value in vnd_get() instead of vnd_set_unack().
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Vikrant More