For now as local host works as pairing acceptor, the pairing context
flag is set when remote IO Capabilities is received.
Reply to the request uses remote's authentication requirement
cross-checked against predefined authentication methods that are based
on local and remote IO capabilities.
> HCI Event: IO Capability Response (0x32) plen 9
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
IO capability: NoInputNoOutput (0x03)
OOB data: Authentication data not present (0x00)
Authentication: No Bonding - MITM not required (0x00)
> HCI Event: IO Capability Request (0x31) plen 6
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
< HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
IO capability: DisplayYesNo (0x01)
OOB data: Authentication data not present (0x00)
Authentication: No Bonding - MITM not required (0x00)
> HCI Event: Command Complete (0x0e) plen 10
IO Capability Request Reply (0x01|0x002b) ncmd 1
Status: Success (0x00)
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
Change-Id: I0f95a58178618f06de16cce0e9d9cf6c85209677
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
According Core Spec 4.2 [Vol 2 Part E, 7.7.41], remote authentication
and IO capability requirements have defined valid ranges.
Change-Id: I0f7cfb79097abbf96b3fee79a757431b6beef665
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Extended Inquiry Result Event shall always have one report so there is
no need to iterate over array.
Change-Id: Id6c550074395666b36d4dc6b956c9e4ae4154938
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to create outgoing BR/EDR connection and cancel pending
connection before it succeed.
Change-Id: I5c08bb2e89f79c09fa7930f860d6080d902186a1
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Reorganizes mostly by using preprocessor (indirectly Kconfig options)
strictly LE-SMP related interfaces and security interfaces shared
between LE and BREDR connections.
Change-Id: I90daa36d72403cd5b73e6791714fcaf7f1fbe8e5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
bt_auth_cancel can be used to cancel any type of pairing.
Change-Id: Ia1a6ba834186ab6d5082d3eb473319c2d70cf4a7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This documents more in detail the behavior of the API, what callbacks are
involved and when they are called, etc.
Change-Id: I62994ed09a9e8b3f14dc3f8c792469a93aeefabc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This uses ATT Indicate Value command to indicate changes and wait for
confirmation response.
Change-Id: I123a00e374929d779f96a02440215c32c0e79423
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adds values to be validated during examining Secure Simple Pairing exchange IO
capabilities and bond types.
Change-Id: I3f25fa863b9a8a46c0a0e3c366e8b915c7db0bc7
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds HCI protocol type for Secure Simple Pair Complete event and enables the
event in controller.
Then implements the initial SSP Complete event handler with catching
the status of SSP process.
Change-Id: Ic7cc5b4cab8a1b4120285815c24eeb6483d748df
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables IO Capability Request event in controller.
Adds handler to react on controller's IO Capability Request event during
incoming pairing.
As a initial case respond to the request with negative reply setting
reason as 'pairing not allowed'.
Change-Id: I161c7ab7f1031a78cfa50444f41624232e5c5146
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables IO Capability Response event in controller and adds remote IO Capability
and authentication fields to connection object.
Initializes them using IO exchange values delivered in SSP IO Capability
Response event data set representing remote as a part of incoming pairing
process.
Change-Id: Ia73a912f6fb633d1d1bb086ef3af9a280ac5a864
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Turns on Secure Simple Pairing mode in controller. Since there's a prerequisite
the controller is 4.0+, turning the mode is unconditional.
Change-Id: Id4a10ccf8892a430b0daaa6750835516b17b7e8a
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Since the return value of these callbacks is a number of bytes ssize_t
is more appropriate than int.
Change-Id: I3406fb382975d62f51e7a195666d0ae88364fd2c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Document callbacks included in structs since they are also public API.
Change-Id: I8eda02b12172c54e8076208d8ea5ae246c650a3c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Document the parameters and expected return values of the read, write
and flush attribute callbacks.
Change-Id: I600da2ed64944986395520d7fae77fcb05b58e86
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce BT_GATT_ERR macro to make it possible for application
callbacks to return exact ATT error codes.
Change-Id: I971536508e75036fbddc40b3f33e5201e11940bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These are specified in the Core Specification Supplement.
Change-Id: Ieaa9f061666119bb430d77b0fd40b4891e515b81
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For now this only exposes the various ATT error codes.
Change-Id: If568782e90dca22871681d2d3b2d81ae4cb8e5e4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds CSC Service related UUID definitions.
Change-Id: I3fc77cd6561ccfd7de0d906c7ddcd5d8dac5bff9
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds Environmental Sensing Service related UUID definitions.
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Change-Id: Idd87139971fb3c992b7fb7e346ce2ea90553ad38
This can be useful for both LE and BR/EDR connections so it sits
outside of those specific structs. The values are intentionally
matching the HCI values so for the HCI case we can just do a direct
assignment.
Change-Id: Id78d304bb61e5fd941f2c35351758c1eecc6ab6a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Uses the correct doxygen formatting tags to identify variables.
Change-Id: Ia46d4e008eb7790383682ac33bd3d6dbc2a66a9d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
These are needed both by nble as well as the HCI stack and will likely
also be of use for applications.
Change-Id: Ifd10ae6df25151162d9d5491466324b4a42f5506
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add read parameters to read callabck
Merge bt_gatt_read_multiple functionality into bt_gatt_read.
This makes it easier for application to handle all types of reads
as same sematics is kept for them.
Instead of destroy callback, call read_func with NULL data to
indicated that read has completed. This makes it clear when
read is completed and parameters used for it are no longer needed.
Thanks to this application doesn't need to abuse user data destroy
callback for detecting if read has completed. Since destroy callback
is no longer needed it is removed.
Also note that bt_gatt_read doesn't take any user data parameter
and that destroy callback was acctually called with read parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_read_params.
Change-Id: I8d6ea136b1e61c1dae73cca868b53c48c45a5492
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This removes destroy callback for userdata as bt_gatt_subscribe
doesn't take any user data parameters and that destroy callback
was acctually called with subscribe parameters.
We assume subscription is active if bt_gatt_subscribe returned 0
(ie write command was sent). This is due to remote might be sending
notifications before reply to write.
Also note that bt_gatt_subscribe doesn't take any user data parameters
and that destroy callback was acctually called with subscribe
parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_subscribe_params.
Change-Id: I58ac9cd481ffa08ccc2d7a0464ca75f61fb280c5
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Applications should be able to update the connection parameters.
Change-Id: I446f64fcd0b27b605e636e566fb35a362a92de96
Signed-off-by: Louis Caron <louis.caron@intel.com>
Instead of destroy callback, call discovery_func with NULL attribute to
indicated that discovery has completed. This makes it clear when
discovery is completed and parameters used for it are no longer used.
Thanks to this application doesn't need to abuse user data destroy
callback for detecting if discovery has completed.
Also note that bt_gatt_discover doesn't take any user data parameter
and that destroy callback was acctually called with discovery
parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_discover_params.
Change-Id: Iec4eb9795975ef2555502e13a682e13ff37742e0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Applications that need it can retrieve the connection
parameters at any time, connected callback for example,
and eventually handle the connection update callback or
not, this gives maximum flexibility for handling these
parameters and requesting change.
Change-Id: Iba7d30ade045875ebc721fd332e031d9008e248c
Signed-off-by: Louis Caron <louis.caron@intel.com>
This type should only be used as a pointer.
Change-Id: Icf656f310344cecbde527e809af6d00dcfc7ef82
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
In anticipation of supporting a local static random address in the
future it makes more sense to call BT_LE_ADV_ADDR_PUBLIC
BT_LE_ADV_ADDR_IDENTITY.
Change-Id: I4826f1dfb50b54e13a35cbe7ee74e28641c81ad1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way we don't need a special BT_BYTES macro and avoid bugs coming
from wrongly counted number of bytes (which is now evaluated at
build-time).
Change-Id: Ic6319234a816fe2fab6229b3bb980d0e3503e241
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are no more users of this API, and the only user it had in the
past was quite a special corner case. Just remove it for the time
being.
Change-Id: I696139b493f9ca75530665de25a4a4e03fc0ac5b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce new UUID API with bt_uuid, bt_uuid_16 and bt_uuid_32
structs. The specific size structs are derived from the common bt_uuid
struct to make it possible to use CONTAINER_OF().
Change-Id: I9cb03c73406acb7768d410fdf29eae75d252163c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_l2cap_chan_send does actually return the number of bytes sent.
Change-Id: I9dd79da992577f2e1e8d30d42eeb0c398e48ff33
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In some cases we need the raw 16-bit UUID value instead of a full UUID
object. Add definitions of these values so that the code doesn't need
to do complicated tricks to get hold of them.
Change-Id: I98f276402f20fe03fea2777743f15ca7fcae42c6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adjusts encryption state name in connection complete event.
Change-Id: Ib7e6b2c5738ca9f5832e0e277d8f5718050f4bef
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds extern "C" { } blocks to header files so that they can be
safely used by C++ source files.
Change-Id: Ia4db0c36a5dac5d3de351184a297d2af0df64532
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds all valid link keys types available during legacy and SSP
authentication.
Change-Id: I42f2aba0122d33a984bd84c56b7a6a290f5e9e1d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This make more sense since the handles are normally self allocated by
the stack.
Change-Id: I198dd9c3ef6259cff8a0e528514918ec18990dea
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This add bt_gatt_attr_next function that can be used to iterate to next
attribute which is convenient if original attribute is known and using
bt_gatt_foreach_attr would require a lookup and another function to pass
as callback.
Change-Id: I1bd522fd4ae784e08aa375b35320191cbfc03a54
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enable applications to build with a single table representing the
database where attributes don't have to store a pointer to the next
attribute thus reducing its size.
Change-Id: I4c84e2d50f9088a2f9879068890f0646e586e007
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add API definition and stubs for directed advertising.
Change-Id: Ib22d3acb6d2e76b0c638b26b8e07860cd189f640
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All of the authentication APIs deal with bt_conn objects. For
consistency it makes therefore sense to use the proper bt_conn name
space with them.
Change-Id: I47912d542373df511524cc6ad2532d6c9a76ca68
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To have some proper split of conn.h and bluetooth.h APIs make sure all
bt_conn related ones are in conn.h. This also helps avoid forward
declarations for some upcoming patches where we need bluetooth.h
defines from within conn.h.
Change-Id: Ief3d32118a6749fb5785dab6cb3fee4ebb86ddb4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is essential so that the application can be notified of
connection failures and also be able to know the reason for the
disconnection.
Change-Id: I30108958963f6aeac690612bb26738dc4c67ca80
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The authentication APIs may fail, so it's fair to give the application
a chance to catch these errors.
Change-Id: I323df86b94a823b201fe22d412e6bbcaa9029550
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use __packed so that enums consume the smallest possible size (in our
case the same as uint8_t).
Change-Id: I0440113e88a24509f406375d99173ddb54890925
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the advertising API according to what has recently been
discussed and agreed upon.
Naming-wise the most important change is the removal of "EIR" which
was confusing since this is mainly used with LE at the moment. The
Core Specification Supplement consistently uses the generic terms data
and data type to describe what we're dealing with here, so the new
names are bt_data and BT_DATA.
Another change is to detach the actual data from the struct by
converting it from an array to a pointer. This is not only essential
for supporting BR/EDR (which has a different length) but to also
minimize memory usage.
Another change is to require the caller of bt_le_adv_start() to
provide the array lengths of the ad and sd paramters. This way we
don't have to have the empty (8-byte) element at the end of each
array.
Lastly, the bt_le_adv_start() logic is slightly modified so that it
will always clear the respective data if necessary. Previously the
user might have been left with a previous callers data if it passed
NULL to the API.
Change-Id: I318026ceb1b52bb688edf4dcfed82613bd15c3e1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
According to Core Specification 4.2 Vol 3, Part G, 3.3.3.4,
Server Characteristic Configuration descriptor shall be:
"Readable with no authentication or authorization.
Writable with authentication and authorization defined by a
higher layer specification or is implementation specific."
So there shall be separate authorization permissions
for write and read access.
Change-Id: Ia2850acbb976571743bf96cf9cbe0c1128534073
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch fixes some outdated or invalid comments and adds some
clarification of GATT Discovery procedure.
Change-Id: I91994917bea246a2d112df65123a3e6dec42ee92
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
bt_gatt_discover function doesn't take user data and therefore
bt_gatt_discover_func_t is not providing any user data. It was
always providing discovery parameterts used so just match that
in function definition.
Change-Id: I90086285d02e2ef50be1d5d25299bb1c6819fdd7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
We can calculate the length with strlen() and there should be no need
to consider anything else except nul-terminated C strings.
Change-Id: I02ec4b1dddbb1bd457f035926c86b27f4c2ab050
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This allows to conveniently start passive scan from central
applications.
Change-Id: Idf470be747ab7c6e7413cc368227b0b69e7b78a4
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
When the BLE GAP service needs to declare the preferred connection
parameters.
Change-Id: Iff8a6f68f2dfe478c44dcc5a3e95abda271ecc00
Signed-off-by: Louis Caron <louis.caron@intel.com>
Asynchronous functions use the parameters to store relevant data even
after the scope it has been called which means they have to remain valid
while the operations are in course.
Change-Id: I2cc79e5ce352fef4e077e9fb4cb0f4d111463d00
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces bt_uuid_copy which can be used to copy UUID values.
Change-Id: I22d996bcace454769ac871a43b9acebe8b23db39
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Enables get basic connection info support for non-LE connections.
Change-Id: If295b552567886256cfc1e215bfe3149d2f1f60c
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Gets included authentication API in BR/EDR variant
Change-Id: I4fa55bb3baa8db79f6e9f5f1c65c0d93f8f8780a
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
BT_STACK depends on BT_STACK_DEBUG_EXTRA, therefore moving it there.
It also allows to use BT_STACK in drivers, at the moment only
Bluetooth stack uses it.
Change-Id: I41e0e0d49dae6abef2dc3a8d1d109127787d3db0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In order to support more standard descriptors, the PF macro and helper
function are added.
Change-Id: I52db3c32f40f39b9c6bfdb9573d0a614d0f3295e
Signed-off-by: Louis Caron <louis.caron@intel.com>
In order to support more standard descriptors, the UD macro and helper
function are added.
Change-Id: Ic9a82658668107b40abc5c98002fe5091dc10f08
Signed-off-by: Louis Caron <louis.caron@intel.com>
This patch replaces bt_gatt_attr_func_t with bt_gatt_discover_func_t
to be used as a type of discovery callback. The reason is
bt_gatt_attr_func_t don't return bt_conn which could be used
later on to issue other commands and to application to know
from which connection this results come.
Change-Id: I1f26c72ad5c8a0b97485a337c7005d34281586d7
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This makes it simpler to add the services directly into GATT services
table.
Change-Id: I090c7f9396329cf524947dd6647230c663a55f60
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add basic color logging support. Error logs will be printed in red
whereas warn() logs in yellow. The support is behind a Kconfig option
in case someone needs to build the stack for a terminal that doesn't
support the ANSI color codes.
Change-Id: I080e32db68f87e81f1bb54aa4c634f7cd38f1e33
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enables getting by host connection complete event and handle
internal state of related to the event connection object.
Change-Id: Ie6252ff33cc2e1fff5a4ce746fda7c3a59bf8aab
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
To conform to API convention rename BT_CONN_TYPE_BREDR to BT_CONN_TYPE_BR.
Updates stack code so far uses it.
Change-Id: Ia759ef68bbdb232e3b0992740e0536d310e19010
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Applications may want to protect the privacy (identity of the local
device). One way to do this is to generate a Non-resolvable Private
Address and use that when advertising.
Change-Id: Ib852b03c14af062f914aa99a14e50c2e52ac78c2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no reason for us to go revealing our public address when doing
active scanning.
Change-Id: I27bed74bb377b8bba75843ea76acb8f0d58f70f7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Applications may want fine-grained control of connection parameters.
The two APIs to provide this through are bt_le_set_auto_conn() as well
as bt_conn_create_le().
Change-Id: If5cddbbf017b868d768d18d2a09daf4af8aa00d8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Once we start persistently storing the addresses of devices we want to
reconnect to we also need a way to reload them to the stack. Since we
don't have a connection object at this point the API cannot take that
as a parameter. Instead rename the function and have it take
bt_addr_le_t as a parameter.
The feature was also lacking proper reference counting for the
connection, which this patch now adds (the flag itself owns a
reference). The function is now also possible to call before bt_init()
so that if we load the stack with multiple devices the HCI doesn't get
bombarded with lots of scan enable/disable commands.
Change-Id: I9072bf061eb64f2ecec96f74fb176be13e5bdaee
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way the app can start passive scanning if it wants.
Change-Id: Iab3e60863d5a1a013a5f069a98664628c7b14418
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All current user just want basic active scanning so a corresponding
macro makes more sense than something based on duplicate filtering.
Change-Id: I97787be24b89fad66f2a952c5d53ab76f4e062fb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This uses BT_UUID_DECLARE_16 in macros that can only be of 16 bits
format.
Change-Id: I45d4bcca9859a2e279b1199546891df75a039589
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes it easier to declare 16 and 128 bits UUIDS and also save space
in case of 16 bits.
Change-Id: I5790afd9504ee0cca4a951be6bc542685d0a35fb
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We'll need to have a much more flexible LE advertising API. This is a
first step in that direction. A convenience BT_LE_ADV() macro is
provided to ease converting application code.
Change-Id: I74854487bbdfb4b1cf1bee0b6351d1750a56ff86
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll need to have a much more flexible LE scanning API. This is a
first step towards it. The existing BT_LE_SCAN_FILTER_DUP_* enum
values are converted to macros to avoid having to update application
code at this point.
Change-Id: I0c8d29dc156bad67cddc9401c0d72aee8ec6d8de
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_br_* is equally understandable and the same length as the
corresponding bt_le_* prefix on the LE side.
Change-Id: I1820f9b9fab6363b696072f6b70d57c0bc780078
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To have a clear split between LE & BR/EDR rename these APIs with the
appropriate prefixes.
Change-Id: I983df2b5880947d96f0ad289d12f3383f44894be
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of struct forward declaration there should be used
struct type with at least empty body.
Otherwise compiler doesn't know the size of variable of that type
used later and emits error.
Change-Id: Ie0643ed92b8eb95c1d55c9295117a2a9b8cc95cc
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds capability to stack to make controller discoverable and
connectable.
Change-Id: Iffe380d2bde0c193f806b76cce3933914c9a4796
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Make newline part of log macros so that caller doesn't have to
append '\n' every time logs are used. This make sure that no
log will be missing new line which results in concatenated log
messages.
Change-Id: I3231ae747c790816dbc1608e0a3bd56467ba0a1b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Improves documentation consistency by using "N/A" instead of "None"
when the routine does not return a value.
Change-Id: I429a159b3037742cbc431db0cb4828ab9d6d35c3
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
If the SDU length is bigger than the amount data received in the first
packet it means it will be segmented in 2 or more packet until the SDU
is completed.
Since the MTU required by the upper layer could be much bigger than the
ACL buffer the code now request a buffer to reassemble the SDU.
Change-Id: I286d16e185f59a8128c4357dddebdc13145dfe31
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This use struct nano_sem to control the credits so when sending if the
credits hit zero it now waits more credits to continue instead of
failing.
Change-Id: I2da4692eaa16828f74a1df4346583258bb4cf8f0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_l2cap_chan_send which can be used to send data to
dynamic channels resulting in the following trace:
< ACL Data TX: Handle 3585 flags 0x01 dlen 17
Channel: 64 len 24 [PSM 128 mode 0] {chan 5}
a0 02 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
ff ff ff ff ff ff ff ff ........
Change-Id: I753e301b1125ef21a345ab96470f15bc53a4869a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allows to request user to confirm displayed passkey with remote
device. This allows to have authenticated LE SC link resulting in FIPS
security level.
Change-Id: I5b6c1666e3d1687cc04c5d66529372db090dd000
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This will be used to determine if controller supports
"LE Read Local P-256 Public Key" and LE Generate DH Key" commands.
Change-Id: Ib2bf7cfa99a20c07af0d3043ac9f9c2e0a6c2fcb
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
"LE Read Local P-256 Public Key" and LE Generate DH Key" commands
are used for LE Secure Connections pairing. "LE Set Event Mask"
is used to unmask events generated by those commands.
Change-Id: I601c8e21093ed2170dfe8e5618b34493268fe68d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to disable events not required by application. In future
this can be extended to enable events that are not enabled by default.
< HCI Command: LE Set Event Mask (0x08|0x0001) plen 8 24.018392
Mask: 0x000000000000001f
LE Connection Complete
LE Advertising Report
LE Connection Update Complete
LE Read Remote Used Features Complete
LE Long Term Key Request
> HCI Event: Command Complete (0x0e) plen 4 24.019215
LE Set Event Mask (0x08|0x0001) ncmd 1
Status: Success (0x00)
Change-Id: I29bfaa0743ac9e604a637f51503ff28a9b2074c2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
With this patch application can unsubscribe notifications
from Subscribe value callback directly, if BT_GATT_ITER_STOP
is returned.
Change-Id: I7873594f5dbe6e8c5bef11bf397a74cdc870a464
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch refactor reading of attribute values as a client.
Current MTU size is taken into account to determine if read
procedure has been completed or not.
For now, read procedure will be continued until whole is read,
or stopped by client.
Core Specification says that "The Read Blob Request is repeated
until the Read Blob Response’s Part Attribute Value parameter is
shorter than (ATT_MTU – 1)." (Vol 3, Part G 4.8.3)
Because application didn't know the current MTU value,
there was no way to determine if data received is complete.
Change-Id: I9d0e3f8638b58c3a4e39060333aedc133b775e3d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds bt_l2cap_chan_disconnect which can be used to disconnect
dynamic channels resulting in the following trace:
< ACL Data TX: Handle 3585 flags 0x00 dlen 12
LE L2CAP: Disconnection Request (0x06) ident 2 len 4
Destination CID: 64
Source CID: 64
> ACL Data RX: Handle 3585 flags 0x02 dlen 12
LE L2CAP: Disconnection Response (0x07) ident 2 len 4
Destination CID: 64
Source CID: 64
Change-Id: I77ec29c8879a330b7f73e217621436045fa5163e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_l2cap_chan_connect which can be used to connect dynamic
channels resulting in the following trace:
< ACL Data TX: Handle 3585 flags 0x00 dlen 18
LE L2CAP: LE Connection Request (0x14) ident 1 len 10
PSM: 128 (0x0080)
Source CID: 64
MTU: 63
MPS: 65
Credits: 4
> ACL Data RX: Handle 3585 flags 0x02 dlen 18
LE L2CAP: LE Connection Response (0x15) ident 1 len 10
Destination CID: 64
MTU: 672
MPS: 230
Credits: 10
Result: Connection successful (0x0000)
Change-Id: I73b2bd62fdca4a3ffa35577f0b66c2e6bb0083cd
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This doesn't need to be exposed in the public API.
Change-Id: Ib6d4336684620bd1e03d128765f289b5ebd744ef
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With this split we get better control of the buffer sizes and counts.
We also anyway will need a fragments pool so a simple generic ACL_OUT
pool doesn't make sense anymore. The related Kconfig options for that
have been removed.
Change-Id: I616cf49915a1cc0dc0ddc724e2e182bcbe0c80f6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We know the needed values at build-time, so there's no point in having
a runtime mechanism of accessing them in the code. Having the values
as defines makes it e.g. possible to use them as input for defining
the size of buffer pools.
Change-Id: Ib7556644719bfb631e638fa5bf29f3d1747a5072
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds bt_conn_enc_key_size function which will be used
by application to check encryption keys size of a encrypted connection.
This will be used especialy by GATT applications, because some
attributes to be accessed require encryption with specified
minimum encryption key length.
> ACL Data RX: Handle 64 flags 0x02 dlen 7 [hci0] 708547.536685
ATT: Read Request (0x0a) len 2
Handle: 0x0003
< ACL Data TX: Handle 64 flags 0x00 dlen 9 [hci0] 708547.544302
ATT: Error Response (0x01) len 4
Read Request (0x0a)
Handle: 0x0003
Error: Insufficient Encryption Key Size (0x0c)
Change-Id: Idbc9afde7ec80504898bd8d1e193f3e71a93f3f9
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This removes some outdated comments, adds missing ones
and fixes some major typos.
Change-Id: I3e6c0c1b88c67852fc8c24eb2ff35d74af8bc656
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Fix format of bt_l2cap_server_register documentation.
Change-Id: I22322a235bb1d6b6752bfe13ce8e305481649125
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
These make the code more readable when it comes to encoding and
decoding ACL handle values.
Change-Id: Ibd1972d6001c6c0c55428300f839b288dff1ce52
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The space that the HCI driver needs to reserve for its own use is not
necessarily symmetrical. E.g. even with the current H4 driver we only
need to reserve space for sending data but not for receiving it.
Keeping track of these values independently enables more efficient use
of the buffers.
Change-Id: I64917b545c5cd77356ed038d09afe76422334661
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that we have the buffer type enum as part of the HCI driver API we
can take advantage of it to pass the buffer type information and not
have to have two separate callbacks.
Change-Id: Ib2ee5b1540e532c9b27903e97660a276c1293fbc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since the buffer type is essentially a HCI driver - HCI core
communication detail the appropriate place for it is driver.h. At the
same time remove the unnecessary and slightly confusing BT_DUMMY type.
Change-Id: Ic813ad24d8f0530d3779006063ea21b010d29cf6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no need to maintain a separate module for this anymore.
Subsequent patches will have further simplifications thanks to this
being now handled in a single c-file.
Change-Id: I4510c9f72b121e1e5fd19eeb8b5d5ddf2f4bfffe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way we avoid dealing with the specific buffer type value and to
make it clear that these are for drivers onle.
Change-Id: I8aef7ec6a767b2fa68cbe374eb371e2a6192f675
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is a necessary step in preparation for removing the buffer type
information from the buffers.
Change-Id: I29d8fae32aa660416a1c12e87840499c711e659f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To avoid unnecessary stack variables and to simplify code, add helper
macros to access the Bluetooth specific ACL and HCI user data that's
part of the buffers.
Change-Id: Idc337537721115c4091982c04f8a05bbbf0d5a19
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that all code is converted remove the temporary helpers for the
old bt_buf API.
Change-Id: I5183add527d204c51103549fda3378040d5f8f68
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert the code to use the net_buf API instead of the soon to be
removed bt_buf API.
Change-Id: I5f376caeb861ac8b815a0a2e235bd188b9e8185b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert the code to use the net_buf API instead of the soon to be
removed bt_buf API.
Change-Id: I226de212d4f8d4f5b613708ffe42570443bc2182
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch performs the minimal necessary conversion to the net_buf
API. It uses a temporary "#define bt_buf net_buf" to make it possible
to convert the code in smaller increments. Most old bt_buf function
also serve as one-line wrappers to the matching net_buf APIs. Once
everything is converted these helpers will be removed.
Change-Id: Ie31433d33576022c9c193a35d2389267005545d6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes BT_GATT_CHARACTERISTIC declare a local bt_gatt_chrc so the
applications don't need to declare themselves.
Change-Id: Icf3fad7dffea5667c6f13aa022a5722900da51e8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The spec says it should always be the very first descriptor after the
characteristic:
"BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part G] page 534:
3.3.2 Characteristic Value Declaration
The Characteristic Value declaration contains the value of the
characteristic. It is the first Attribute after the characteristic
declaration. All characteristic definitions shall have a
Characteristic Value declaration."
Change-Id: I6c38dea9cc4c1a05997edbd348e2759680472725
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
value_handle is not used for anything.
Change-Id: I3885d221b162eb3bd44956af64280baf61dc001b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_gatt_register will assign a handle if not initialized and removing
the handle makes it simpler to change the attributes since it is no
longer possible to have conflicting handles.
Change-Id: I787f7325cc990c360056b1aefd07bb7d7876b445
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allow calling bt_gatt_register multiple times so different tasks
can add their own services separately.
Change-Id: I8143ddedfa1079087d608013d1a97b552a3007dc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We want to make the naming convention ref/unref rather than get/put.
So far the only reference counted objects are the buffers and the
connections. For the buffers the new generic buffer API will also use
ref/unref.
Change-Id: I9fe8b8a6a50a8baf06ba231e8f6717a5a47dd292
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_uuid_to_str uuid param is const therefore bt_uuid_str should be const
as well.
Change-Id: I043d66d16c863ed92e60477dbbb9c37bcde92703
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This make use of bt_uuid_to_str to when printing UUID values, to make it
simpler when it is just going to print so the patch introduces a new
function that does the conversion in place using a static variable.
Change-Id: Idfedf05a5ad201653fff2e01387f046cd5647c83
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allow sending direct notification to a specific peer without
using CCC which is allowed by the spec:
BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part F page 507
3.4.7.1 Handle Value Notification
A server can send a notification of an attribute’s value at any time.
Change-Id: Ieff29216cb9ba197c0da92d7b22b26e63101cfa8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For limited discoverable mode, we need to have a define
for this advertisement flag.
Change-Id: I774b68546983697844eca2644b0ca0a85b8026e8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds an option to enable L2CAP dynamic channel support, fixed
channels are not affected by it.
Change-Id: If36bece46b7b94142ea1ac976b878d1b5ae6a578
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This split L2CAP API so that server API is available to applications
while the rest of the API is keep internal to the stack.
Change-Id: I031926ff906ce100684fba0947b2e9eb2c8fcaeb
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Depending on selected Kconfig options some parts of public API
are disabled with #ifdefs. This should make it easy for user to
figure out which options should be enabled to specific API.
Change-Id: I4ae1bfd7bf535ea45869772c429ccd3d3d4c214e
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Add discover type to bt_gatt_discover_params to the API is reduced to
just bt_gatt_discover, this should simplify adding support for
discovering secondary and included services.
Change-Id: Iadeed86fed115afee1340b2c09821d7fafdda0f4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables bt_gatt_subscribe to subscribe using indication value in
addition to notification.
Change-Id: I25f3b057e36b023a79fb66b11b70716ecc299ba9
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move parts of the API that are not usable for applications to
an internal header.
Change-Id: Idbcd3db8acda74375ea9deec2bf3d7eddc8a4ddb
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds bt_buf_clone which can be used to duplicate a buffer, including
its contents.
Change-Id: I473841e1fce00fddbfac1fb2c55d40741658484f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pass service handles to the callback during service discovery.
Change-Id: I616de5188faf76c84cc02ceb29a6f5aab631b89c
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Adds HCI layer event defines to be used by LE Connection Update
Complete event handler.
Change-Id: I5c3502054acd4f838a33c55df8d1eefe1acec6b4
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This callback is called if security level of a connection was changed.
Change-Id: I268da245cf4b7f6d2bfbd57969ce2da6c34fc69f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Adds HCI layer defines to be used by LE Remote Connection Parameter
Request routines.
Change-Id: I7274a33c704c47d81612dd67bd732ba48d3aa1c8
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Adds new error codes to be used by Remote Connection Parameter
Request handlers.
Change-Id: Ief163350c677f251ea30c0ff2f1b70b86ee2a5f6
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This callback is called if identity was resolved for remote device
that was using Resolvable Private Address while connection. From
now on only Identity Address is used.
Change-Id: I5976be575a8e4ad8c13f56d7bc274d751ae37511
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to request passkey being entered by user.
Change-Id: I6a56c65ca689473659a13c19f8578058476d2685
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The term 'context' is vague and overloaded. Its usage for 'an execution
context' is now referred as such, in both comments and some APIs' names.
When the execution context can only be a fiber or a task (i.e. not an
ISR), it is referred to as a 'thread', again in comments and everywhere
in the code.
APIs that had their names changed:
- nano_context_id_t is now nano_thread_id_t
- context_self_get() is now sys_thread_self_get()
- context_type_get() is now sys_execution_context_type_get()
- context_custom_data_set/get() are now
sys_thread_custom_data_set/get()
The 'context' prefix namespace does not have to be reserved by the
kernel anymore.
The Context Control Structure (CCS) data structure is now the Thread
Control Structure (TCS):
- struct ccs is now struct tcs
- tCCS is now tTCS
Change-Id: I7526a76c5b01e7c86333078e2d2e77c9feef5364
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add support for signed write with sign parameter for write without
response.
Change-Id: I79008532d88b10d34db1f68898ad4258dd3e761b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds validation for passed callbacks. Previously registered
callbacks need to be explicitly unregistered by passing NULL.
It is no longer possible to implicitly overwrite callback
structure.
Input Output Capabilities generation is factored out to separate
function. This is in preparation for adding more callbacks.
Change-Id: Ie809ea2daa80f9c54585efb459b49af1107007d3
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to register agent with display capability resulting
in DisplayOnly InputOuput Capability being used.
Change-Id: I98931af35c51a71882b60303c0f5d4da19eefbc4
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
For now this is used only in conn.h. Allows to reduce includes
dependencies.
Change-Id: I60dbe588e711fa0332049cbea43ffb6838a58823
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This split the use of ATT Write Command and ATT Write Request since with
the former it is possible to sign the data thus making combinations of
parameters in bt_gatt_write complex/confusing.
Change-Id: I0349acd16d22ea4e38ac3e5ad8c3cdc318851633
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables writing from offset using Prepare Write + Execute Write
procedures including Long Write procedure when the data is bigger than
the MTU.
Change-Id: Id35d66c011ba582a4ba92ffe75444226e479335a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We need to be able to perform the init procedure asynchronously
through a callback. The RX fiber is a good candidate to use for the
callback since it's not active in its normal operation before
drv->open has been called. In order to prepare for a future
bt_disable() API the init API is renamed from bt_init() to
bt_enable(). If a NULL pointer is given as the callback the API
behaves synchronously like the old bt_init().
Change-Id: I4e78fa8f32dcf5477ea05a8db75aca5cdce591fd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds bitmask to be used for validation of LE features
exchange support.
Change-Id: I96a79f5e5c4fef330933480f9dd5ec567cd9523f
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds LE read remote features command and event types.
Change-Id: I3270142379c6f822f6f4be2e720c9cabb5d3df3e
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The slave may request a change to the connection parameters using
the L2CAP LE signaling channel if either the master or the slave
or both do not support the Connection Parameters Request procedure.
Therefore if local controller doesn't support this, the request
can be made for sure.
Change-Id: I23e70793763693e40dab3bfb6a9634816f5b02b2
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This is consistent with the rest of the API since the attribute length
can be at most 512 bytes long.
Change-Id: Ia2e60cf8dadcb93d0d091cda5be1b80de98fae94
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Attribute length can be up to 512 bytes long so it needs to be at least
uint16_t, ATT already takes care that the MTU does not exceed 512 bytes.
Change-Id: I6c8dc80a4b63f212420c26c0a24d93939fa510fe
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With this patch advertising state and scanning state are stored as flags.
Change-Id: I5d2dc37972620ee89aaf55d45e294e8be82863d3
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds bt_gatt_unsubscribe which can used to unsubscribe to attribute
value notification using CCC handle.
Change-Id: I8a3b1594787a3322834516d0306a84c8ef7792dd
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_gatt_subscribe which can used to subscribe to attribute
value notification using CCC handle.
Change-Id: I0983843836b0c2253f750b34b7765dd880cb10a0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
All public APIs shall contain the complete documentation including
@return in case the function return something.
Change-Id: I1f16eaf988ace1a3ac760c59eacd71a6a5912df9
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_gatt_write which can used to write attribute value.
Change-Id: I45a02e6dbf642ed1bcab8234180f2c48a28e2874
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This function operates on bt_conn so it should be in conn.c and
exported through conn.h. Rename it with the appropriate bt_conn_*
prefix.
Change-Id: Id17c67f0e95cc1afb10aa7742b2d2ce0110ea616
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_disconnect deals with the bt_conn object and should therefore
reside in conn.c and be exported through conn.h. It should also have
the appropriate bt_conn_* prefix.
Change-Id: I75eb648fd9aa8ced9a991d472c319d25f4b772af
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds bt_gatt_read which can used to read attribute values.
Note: Attributes which values are bigger than the MTU need to be read
multiple time until the end since the stack cannot cache any data.
Change-Id: I09c502eeb674a577673182c35a0e1a84519fd3b7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Calling bt_conn_set_auto_conn one can decide if auto connect shall
be used. If so, everytime the connection is lost, passive scanning
will be enabled to listen for connectable advertisements from
remote device and re-establish the connection.
Auto connect can be disabled if one decide to disconnect from
this device using bt_disconnect or call bt_conn_set_auto_conn
with auto_conn flag set to false.
Change-Id: Ic9952e313cb8612ea6c72838be0755805daeffcf
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Enables directly add 16-bit value at the end of operational buffer.
Value is converted to little-endian format before is appended.
Position of buffer's tail is updated during addition.
Usage of bt_buf_add() call enables monitoring available limited room
in the buffer when CONFIG_BLUETOOTH_DEBUG is on.
Change-Id: Id7ac62cd3b11ef03302e94185a7faae747eccb20
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This adds bt_gatt_discover_descriptors which can used to discover all
descriptors in the given range.
Change-Id: Idf93852ef9d8ba3bfce20dc0b95f4e11aa0dc73d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds above function to stop ongoing advertising.
Change-Id: I16b3913524a61e844a81cbe733f2b8e6072ab442
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds bt_gatt_discover_characteristic which can used to discover all
characteristics in the given range.
Change-Id: Ia7ddb93dfdb0f979409e133c902a1cbd9ae9fe71
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
gatt.h API depend on bt_uuid so make use uuid.h is always included.
Change-Id: If9d4e5a668ac4e0b167eda8fe41e8b4810dfe298
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_gatt_discover can be used to discover primary GATT service by UUID in
a selected handle range, after it attribute found the function callback
is called so the user can interact the attribute found and decide to
continue to the next or stop.
Change-Id: I37514f00c82ce5520d7a14757a6ff12ee34f0736
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the Command Complete status is read, this status shall be returned.
Change-Id: Ic3fe102c16da4b01d002a2d39952fd401e9f832d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
bt_gatt_exchange_mtu can be used to exchange MTU used by GATT, the MTU
is selected automatically based on the amount of data bt_buf can hold.
Change-Id: Id49a506663d922132e81c0a753a983b93579ffd0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The change replaces multiple asterisks to ** at
the beginning of comments and adds a space before
the asterisks at the beginning of lines.
Change-Id: I7656bde3bf4d9a31e38941e43b580520432dabc1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change all occurances of /*! to /** to match javadoc
style.
Change-Id: I3a759d34e0e928216f61252682266e64c5b875f8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds HCI routine to cancel creation of outgoing connection.
bt_disconnect is called to cancel connection or disconnect based on current
connection state.
Change-Id: I462a61308a580bb24aa9a6c398eb7e443b995655
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Enables make outgoing connection with error handling.
Free connection objects maintained in polls are assigned to active
connection by result of lookup on the polls based on input
peer LE address.
Updates shell application to reflect above changes in stack.
Change-Id: Ibc71343c0d122cc78c48bac2ff1e50533369b7d2
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Also rename bt_conn_security function to bt_security and
bt_conn_security_t to bt__security_t.
Change-Id: I543c7b97241c4389ef0eb491b6869f93105ae533
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This was same as low security and is not needed. This also match
security levels with LE Mode 1 security level from Core Specification.
Change-Id: Ia82e1f4d94c281d7e7f88f03a16a1e34eb49f710
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This command will be used to enable encryption when acting as master.
Change-Id: Iaaf1d5b98bfcfcf17a5cc7006a6c40d0905011fd
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This adds bt_conn_security function that can be used to elevate
security on connection. If device is not paired it will trigger
pairing first.
For now only JustWorks pairing is supported so full security level
tracking is not needed as only medium level is supported.
Change-Id: I6d344f55286a79bd989bd18f852a6859dc8ea96a
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Now that bt_conn is public using it directly is much more convenient
and in some cases save a lookup by address.
Change-Id: Ia489948634984fe4f1a430da553f8a2a740fb531
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure the bigger members are always list first in non-packed
struct to minimize the use of padding for alignment by the compiler.
Change-Id: I64419e9b27f4e7d3abb4eeb0ef2a88beda5b22e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Changing the spelling to comply with the checkpatch tool.
Change-Id: I7f28fd73bfbc89d91e4d7caccffa2c018dcadf6d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
When connected, the peripheral/slave can trigger changing connection parameters.
Handle such request on central/master and if needed update controller settings
regarding the relevant connection parameters.
Change-Id: If3c1d91752f8d3875918bd8bfe923330790f530e
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This function allows to pick connection destination address.
Change-Id: I3e4959eec00905c64de3d8b9ef810b613c2e9f91
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Make the documentation style consistent and add documentation to
functions that were missing it.
Change-Id: I1822480a604bb2efcb0dbfc63ae0675ebf4b5987
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds user helper functions dealing with formatting bluetooth
address.
Refactors internal helpers using public ones.
Change-Id: If7b9f9a93b2aef3d25df55d6cfae9de05d8830b0
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables sending LE discovery results to user app.
Updates central apps to use new scan API.
Change-Id: Id319c96e15554f2eed4cf507cddd114ca74aa8e5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This API is useful for applications wanting to monitor and disconnect
connections.
Change-Id: Ib1a98ece364f137262515fbb1163c6b08ddf792c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no clear need for this API (at least for now) and supporting
it means we really need to get all state cleanup procedures correct.
Remove it for now.
Change-Id: Ia2c7d51d410117bef12bc08f4f97a4e38ccfb77a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes it clearer that this is a specialized API not intended for
general app usage (unlike most other things in bluetooth.h).
Change-Id: I0ce1d5903610a9b3a99cf0be9f0e1462b04bf45a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To make it clearer that these helpers are intended only for
Bluetooth-subsystem internal code, move them to a separate file.
Change-Id: Iea64780f5c61c1c96e12c9df378676bc49498fe4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Always prefix UUIDS for characteristics with service name.
Change-Id: Ic435fa725e6bc8918af631632156b071121cd0e0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes use of new guidelines to document Bluetooth UUID API.
Change-Id: Ib4c96f97709610b762f6e839294a4db3ac447e73
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adds internal HCI interface routine for creation of basic ACL LE link.
Most of the command interface parameters are fixed.
The internal interface is then used directly by simple public interface with
no connection validation.
Change-Id: I8ed72a9d01348e2a05b62facc9e85060e4500631
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Now that we have a publicly exposed connection object it makes sense
to pass that to the connection callbacks rather than an address.
Change-Id: I8e9b17733d1789539a83c3dbc7a778336d2b71ff
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This one should be used for all public connection related APIs. Right
now it includes the reference counting and connection callback APIs.
Change-Id: Ib9b67e6115bb2e51322644757da1170851c3ca17
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Functions bt_init and bt_start_advertising are referenced in the
doxygen documentation. Documenting them gives better overview.
Change-Id: I70cb19a0a3232ce5abfb22c3a352bf3868c6f8fb
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add BT_GATT_CEP and BT_GATT_LONG_DESCRIPTOR so which can be used by
a task to declare long attributes.
Change-Id: I37a0bb1851b60f3cdfa7e2f00ade70d5c344abbf
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Characteristic Extended Properties has 16 bits not 8 bits as value.
Change-Id: I307fd27a6d589d6614829df178ff890301a9b6be
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduce a new callback called flush to bt_gatt_attr to indicate
when and attribute can cache data, the data is automatically flushed if
regular write request happens and in case of prepare write it checks if
flush is supported otherwise return an error, then upon receiving an
execute write it perform flush over the entire database and respond
with result:
< ACL Data TX: Handle 42 flags 0x00 dlen 6
ATT: Execute Write Request (0x18) len 1
Flags: Immediately write all pending values (0x01)
> ACL Data RX: Handle 42 flags 0x02 dlen 5
ATT: Execute Write Response (0x19) len 0
Change-Id: I2c47f962858b8a741bf40509a648fe2cd6755691
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Arkadiusz Lichwa