To fully support BT Spec. v4.2 LE Topology use LE read supported
states HCI command to find the supported states in the
controller.
Change-id: I6b4cf4cbefdff44e51bb0a4242e0aef3755f43db
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
This adds UUIDs related to HID Service as defined in the assigned
numbers.
Change-Id: I73e8659546587aa9330bcd7d483bc097448e5ced
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Profiles can use this helper to create buffer which reserves the
headroom for rfcomm, l2cap and acl headers
Change-Id: I22f97b54423d66fe0c133a8e9903b652fb6a6854
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
In preparation for the unification of the code in:
drivers/bluetooth/controller/hci
with the existing HCI definitions in Zephyr,
this change addresses both the required usage of spaces
in the alignment of line components that require matching
the alignment of other adjacent lines and also adds all
missing Bluetooth 4.2 LE commands and events so that the
controller code can make use of them.
Jira: ZEP-726
Change-Id: Iabcee6898a09ddaf4479cfe4ecb0eedc194da8a3
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The lmp_*_capable() macros were neither following the appropriate name
space (BT_*) nor the appropriate style (macros should be upper-case).
Introduce a new BT_FEAT_TEST() macro which gives a clearer mapping to
the feature tables found in the core specification. Each specific
feature test macro is now also named with the appropriate BT_FEAT_*
prefix.
Change-Id: Ia6b18b066927908f9bda646e737e63d46a1d17df
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make is possible to use lmp_ext_feat_capable() both for local as well
as remote features.
Change-Id: I05bb6a25303c0dd2f5e0bbc4f7f412210f668aa3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use Read Local Extended Features command to read local features and
extended local features on init.
Change-Id: I4c8594783895f439af36214881aeff24e116e783
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Adds functionality to do connect to remote PSM. Connecting to remote
PSM other than SDP when both support SSP involves raising security
to at least BT_SECURITY_MEDIUM before any CoC traffic on L2CAP layer.
If connection response is send back with status 'pending' it means
remote doing additional job, so restarts RTX timer. If the command
timer is fired detach the apps channel from connection and make it
ready for reuse.
Change-Id: I81f57bc2f5738754f872ce52cb25027db6db5ccf
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Sends the data to l2cap after adding rfcomm header. Profile should
reserve the head room for rfcomm, l2cap and hci headers. Data length
should not be more than dlc mtu.
Flow control is not included in this patch
< ACL Data TX: Handle 256 flags 0x00 dlen 38
Channel: 64 len 34 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x09 cr 0 dlci 0x02
Control: 0xef poll/final 0
Length: 30
FCS: 0x40
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff 40
Change-Id: Ib97dbf85e236a5f75fda6037bb75bc6be00b9dc7
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This adds queueing support for requests that requires a response making
it simpler to use the API. The storage is keep in the parameters of the
request so it is up to the application to define how many can be queued
but in case the application don't want a request to block waiting for
a buffer it can use BLUETOOTH_ATT_REQ_COUNT to control the available
buffers which is recommended in case the requests will be sent from the
RX fiber.
Change-Id: I407c3982a7ecdc4a9eff7172d9d0addd46949783
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
PN (Parameter negotiation) is used to negotiate parameters like mtu.
Initial credit for flow control is also sent in PN. If the dlci to which
PN requested is not found in the dlc list then it will be treated as
incoming dlc request and accept callback will be called to profile.
Dlc mtu has to be set by profile (before it returns dlc) which will be
negotiated with remote. But the final mtu will be min of mtu provided
by profile, mtu sent by remote, and session mtu
> ACL Data RX: Handle 256 flags 0x02 dlen 18 [hci0] 210.108444
Channel: 64 len 14 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x03 cr 1 dlci 0x00
Control: 0xef poll/final 0
Length: 10
FCS: 0x70
MCC Message type: DLC Parameter Negotiation CMD (0x20)
Length: 8
dlci 2 frame_type 0 credit_flow 15 pri 7
ack_timer 0 frame_size 122 max_retrans 0 credits 7
< ACL Data TX: Handle 256 flags 0x00 dlen 18 [hci0] 210.111452
Channel: 64 len 14 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x01 cr 0 dlci 0x00
Control: 0xef poll/final 0
Length: 10
FCS: 0xaa
MCC Message type: DLC Parameter Negotiation RSP (0x20)
Length: 8
dlci 2 frame_type 0 credit_flow 14 pri 0
ack_timer 0 frame_size 30 max_retrans 0 credits 7
Change-Id: Ifd466db6b3b868d04e38db02ebad6e47ab2da030
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Each public header file needs the #ifdef guards as well as a
declaration for C++ compatibility.
Change-Id: If270de1ee74e2e74eab02d218417d80fcbf422ac
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
HCI RAW channel API is intended to expose HCI interface to the remote
entity. The local Bluetooth controller gets owned by the remote entity
and host Bluetooth stack is not used. RAW API provides direct access
to packets which are sent and received by Bluetooth HCI drivers.
Change-Id: I4ba2b7ca2c2b0d6c5de6ef1f231d1c5b82125e09
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds support for setting default BR/EDR name on init. For now
this is just static configuration but can be extended later on
to allow runtime configuration if requested.
< HCI Command: Write Local Name (0x03|0x0013) plen 248
Name: Zephyr
> HCI Event: Command Complete (0x0e) plen 4
Write Local Name (0x03|0x0013) ncmd 1
Status: Success (0x00)
Change-Id: I59ecfc2be8e55c6f90cdb0f12c6fed7f7ce976f8
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Profiles can use this API to register the RFCOMM server channel.
DLC structure which represents individual connnection on a particular
server channel has to be defined in the profile and provide it in
accept callback.
Change-Id: I14e607ca65a29f29389deb2ac5d0658f5cd92883
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
There's a need to add timeout support for control commands on BR/EDR
transport. So far RTX timer feature has application to control protocols
only on LE. Here 'rtx_work' member is moved to common L2CAP context to
safe memory footprint and prepare L2CAP layer to handle RTX timeout
in BR/EDR context.
Change-Id: I9938268a5c4e5dd1f980bb3ec8697d0209c24065
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Implements CoC channel disconnect API initiated from local and handles
response to the disconnect request from remote.
Change-Id: I25f2495404cd405dc83ad56269e4897e53d602e6
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Applies on L2CAP channel object security requirement member and
implements on BR/EDR transport basic security cases during incoming
CoC connection request. Since channel security requirements can involve
sending 2 separate connection responses with proper results depending on
context path, there's a need to store L2CAP signaling identifier set in
original connection request to be restored later to help match proper
response context.
Change-Id: Ibac9a5d2443f2975637e1bd15f61afcad53f843b
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
bt_gatt_exchange_mtu does actually return an int, also change the align
the description properly so it is consistent with other functions.
Change-Id: I6a0780830e13ded15e6262a46094441a2ef662c8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Depending on advertising options this can be non-connectable address.
NFC pairing application document also allows broadcaster/observer
roles.
Change-Id: I9b104ac8fb9752a083a7a31fc20598c66f23f608
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Moves 'ident' member so far included in bt_l2cap_le_chan context only
to common bt_l2cap_chan context. The change is driven by sharing ability
to store/restore 'ident' on both transports and makes use of it only if
CoC is configured. For default configuration there's channel addition
helper to be used internally by dedicated macros managing channel
objects enlisted in connection tracker list.
The common member is used in matching outstanding connection responses
on LE and to prepare a ground for BR/EDR transport context when
there'll be a need to match response to original incoming connection
request after in-between security changes that can happen.
Change-Id: I1a4cad7cd53c74774604a0e9794607081a8b6e80
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This allows to query information needed for Out Of Band pairing
or connection creation. Currently supports only BT addresses.
Change-Id: I60bf9344baee552e7743fa8fc1b3cfb3a4765334
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This lets the callback take advantage of the powerful net_buf API for
parsing the advertising data content.
Change-Id: Id65e6e83efd60c0f36c47bc5446a2e8ec2833d7c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes bt_gatt_write consistent with the rest of the API where the
parameters are passed back to its callback.
Change-Id: Ie94208aa661d3620d0cbc5be4a4fb5b3c3ef061c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Improves placement of well known storage keys type values description
in Bluetooth API documentation by moving the comment to separate line
above the item it describes.
Change-Id: I6a9182d135983c5037cf44a4fda4305abfa4387f
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Improves placement of HCI buffer types description in Bluetooth API
documentation by moving the proper comment describing the value to
separate line above the item.
Change-Id: I15fb72842853b774a066f2c4f075547eb22a406e
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Improves placement of available connection type values in Bluetooth API
documentation by moving comment describing the value to separate line
above item.
Change-Id: I50eab1eb9659e20da35cd35a6fa0d6fabde3f63d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Improves placement of security levels value description in Bluetooth API
documentation by moving to separate line proper comment describing
the value meaning.
Change-Id: Ia2f58282bb664bf96cda888412900024c6ddf4b0
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Improves placement of channel states value description in Bluetooth API
documentation by moving to separate line proper comment describing
the value meaning.
Change-Id: Ib111884bd4a52bdb023b872598a852fc441fefe5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
When each side involved in getting configured L2CAP CoC channel on
BR/EDR transport aggrees on configuration contract regarding in/out MTU,
set proper context flags to start prepare finalize config process.
Change-Id: Ic821ea3b961442be758ad4e2d91b2d812e2a54b5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds CoC channel's context to hold channel setup state and SM routine
that evaluates validness of transitions.
At the beginning DISCONNECTED, CONNECT and CONFIG states are added and
used by CoC setup on BR/EDR transport.
Change-Id: I1bbd16ec2f59ea961791786b78f22834d6f4b4d8
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This adds reading of included service attribute 128bit UUID.
The limitation of this solution is that if several attr handle-range
pairs will be received, this will read first attribute UUID and then
start discovery from the the succeeding handle.
ZEP-373
Discovery related test results:
2/76 GATT TC_GAD_CL_BV_02_C PASS
3/76 GATT TC_GAD_CL_BV_03_C PASS
4/76 GATT TC_GAD_CL_BV_04_C PASS
5/76 GATT TC_GAD_CL_BV_05_C PASS
6/76 GATT TC_GAD_CL_BV_06_C PASS
Change-Id: I27185b3a3ae96c9c03b0f356492df18ba83b183a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The code for adding and removing channels is very similar for LE and
BR/EDR so it can be unified and just leave the CID allocation up for the
bearer implementation.
Change-Id: Icf4c66262c4e973039381ebd1861fad4d46e1535
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This has so far been used in SMP code as the h() function. Now it has
a more generic name and is accessible by all parts of the Bluetooth
subsystem.
Change-Id: Iae4607da9c8b3e6779d9c97f84a4e486d5258ef0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds initial timeout handling as described in the spec:
BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part A] page 126:
'The value of this timer is implementation-dependent but the minimum
initial value is 1 second and the maximum initial value is 60
seconds. One RTX timer shall exist for each outstanding signaling
request, including each Echo Request. The timer disappears on the
final expiration, when the response is received, or the physical
link is lost.'
Note: As for the actual interval used they are based on the values used
in Linux but in case of disconnect the minimum of 1 seconds was used
to follow the text above.
Change-Id: Ib98899c3ff07334955aee9c8fb53b1b89ba7bf31
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
A workaround used to silence a warning in the doc generation process
which involved tagging a structure with a #define can now be solved
with a cleaner approach which is non-code-invasive.
Backup said change and update documentation on what to do when the
issue is found.
Change-Id: I1ef5224cd1b2df2e57c2ace438dba90ba3fc8528
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
If ACL is disconnected with channels still active the code should call
l2cap_chan_del to clean it up properly.
Change-Id: Iffa9345a9697ac80c1f2295578c7161ffeb44420
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Replaces all occurences of LE_CHAN() macro with new name
BT_L2CAP_LE_CHAN() and makes it public.
Change-Id: I426b17b0214f7ab4b69e5febbdca1917f22e7487
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This improves readability of the debug logs.
Change-Id: Ib661535bcbb990cc8a807d40ff570aa11a293c54
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The __stack and __noinit defines require sections.h.
Change-Id: I15f69b2ac9bc737016c986b21c76e576465bfdf7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Command Status, Command Complete and Number of Complete Packets are
used for driving TX fibers (HCI and connection). Missing any of
those event will lead to HCI traffic stall.
Priority pool will be used when critical HCI event is received
or normal pool runs out of buffers. The difference with priority
pool is that buffer from it must not be passed to RX fiber and
must be freed from bt_recv.
If driver knows HCI event opcode before requesting buffer for event
it may hint HCI core about preferred pool selection.
Change-Id: Iad14724945bb59721c5ffb6b62d5a8a3e3f70be7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds flags parameter to write callback which can be used to indicate
that data only need to be prepared with use of BT_GATT_WRITE_FLAG_PREPARE
fixing qualification tests that needs to check authorization or other
errors that cannot be verified with just the permissions.
Change-Id: I3d662b2027718ffb52a280e3bbc9750be14f89ae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes it easier to document and more aligned to other parts of the
API that do make use of bitfields.
Change-Id: If1ff89d653537d854a4f788bf845d2ab6fe5bc23
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This way it is easier to understand what bits are being set.
Change-Id: I17cbcc8adcbacb32d20142b557060759e5b7cd81
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes the code be a bit clearer by letting it specify a more
descriptive value than '0'.
Change-Id: I2e6b46f0924581d0d13f13479aa15170cc9e0e70
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Applications or higher level profiles that are not part of the core
Bluetooth stack may need an easy way to generate random numbers. Since
we already have an internal helper for this export it for others to
use as well.
Change-Id: I29af7cab30ad8f60d481bc847984e781eaecd6bf
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix with a workaround in unnamed unions / structs in bluetooth, i2c,
sensor and uart.
Current documentation parsers (sphinx under Doxygen) don't seem to
understand well unnamed structs / unions. They will not generate any
documentation for any documented members (see left side of
http://imgur.com/mcpBXWc).
A workaround is to make the parser think there is something like a
struct/union/enum name that is actually something with no effect to
the compiler.
Naming it with __unnamed_workaround__ ensures it is clear it is a
workaround while we wait for a final fix. It is #defined to be a NO-OP
to the compiler and rearrange the member documentation as *@param* so
we have some documentation that the non-worked around code fails to
document.
Anonymous structs/union that declare a variable are just given an
internal name.
Workarounds documented in the contribution guidelines.
Change-Id: I4d32cf444f3c5e7d2fb11581e4b41f80e93c9786
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Enables L2CAP protocol definitions for connection request/response and
use it then to start handle incoming PSM connection request to valid
registered local PSM server. SDP PSM got no security restrictions.
The other PSM connections are validated against link encryption and
availability of SSP feature and if not matched are refused with
security error.
Change-Id: I429cf5dbce92300bd52639d5065e0144f8db4d13
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Introduces HCI protocol defines to be able request and read remote LMP
features and if available extended data from peer when connected.
Change-Id: Ic274737d8b6c896eb9e83e2179829bcbadf6f635
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The parameter is already inside a struct that's specific to BR/EDR
discovery, so there's no need to repeat "discovery" in its name.
Change-Id: Idb95788bfc9d62ecd52adecc35104e212724cb78
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since we only have a single user we can enforce length > 0x01. We
should also ensure that the results count is 1-255.
Change-Id: Id5d91acae06c6c6fc66dd59c0e367682a98dc08c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way the application can control the maximum duration of the
Inquiry. The value 0x00 (which is invalid for HCI) is still accepted
for backwards compatibility and gets mapped to the old hard-coded 0x30
value.
Change-Id: Ibc9eb86bbb6c9e45b7b351278517b4a688015195
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Current language is a bit confusing, reword it in a clearer way.
Change-Id: Iaf2d29ab838cf2c5f50d7f2bdb2cdfa83c9a44c7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way the APIs don't dangle on their own under the master Bluetooth
group but are nicely behind a subgroup like everything else.
Change-Id: I608b6019e970db86a1bcdb29f0a52ce4a3165fbe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These prevent the documentation from being included in the generated
doxygen output.
Change-Id: Iffe38c15055b8283d4b9f16b1c830c9f269ba6e4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Refactors L2CAP core data structures and modifies functions that uses them.
Now we can have separate L2CAP feature channel objects for LE and BR/EDR
transport. This's also a ground for make L2CAP CoC API to be common
for both transports.
Change-Id: Ic1197b0e3c4f505764b23fb9c7eb27123a44a675
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This header defines BT_BUF_USER_DATA_MIN which is needed for declaring
buffers passed to BT stack and already includes <net/buf.h>.
Change-Id: I6b556be9fb3939a55af0b73d49fc59152d6d6a53
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
It is no longer necessary to implement flush callback for long
descriptors since the stack can queue prepare writes this callback
will never be called which makes BT_GATT_LONG_DESCRIPTOR obsolete
as well.
Change-Id: Idca31ba8e4404d2acba760c420394d5adee0a508
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This add CONFIG_BLUETOOTH_DEBUG_LOG which depends on SYS_LOG since the
later can actually use either CONFIG_PRINTK or CONFIG_STDOUT_CONSOLE.
Change-Id: Ib2974d1331f6c91d119a218ec95e8bf01069377b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is no need for struct bt_storage being modified by stack.
Change-Id: I732cf94983a29de40d692e802d6a71b8986708df
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The application can return BT_ATT_ERR_AUTHORIZATION on the callback
already so there is no reason to have it as a permission as once set
it always fails.
Change-Id: Ia634e3f313993dd36c06bff48f36d4ddf1264376
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes bt_gatt_write similar to bt_gatt_read where the parameters are
stored in a struct which can be used to store intermediate values while
the operation is in progress.
Change-Id: I3c62af137b99985690cf88dcc37a977a0be891f5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Instead of requiring application to provide both advertising type
and address type used just require app to provide info if advertising
is connectable or not. Advertising type is set based on provided
SCAN_RSP and local privacy support.
When local privacy is enabled it is no longer possible to advertise
using identity address. If such feature is to be required later on
advertising options can be extended.
This gives BT stack full control over what type of address is used
for advertising and is a preparation for random address rotation
and OOB support.
Change-Id: I90e9a683ef3794f155707343c874f75585439325
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Refer to ATT as error domain expected by GATT API.
Change-Id: I70d45a618191ae859f3b2c33427dbb7262511393
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Callback errors should contain ATT error code not posix errors.
Change-Id: I698fac086ab8b2dca3487ab99ee974b4318d16f7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
* service include macro definition takes reference to
first service attribute of the included service
Change-Id: Ib2b1defe2c99aea738da791af74a534d56025eae
Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
Enables API to register PSM server on BREDR transport.
Adds l2cap_br.c file responsible for BREDR specific functionality to
build path based on Kconfig selection.
Change-Id: I92823b0207ab0da96bfb813353de9f95fa5dd0f4
Origin: Original
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Indenting away the function pointer name from the return type is not
consistent with the rest of the code base.
Change-Id: I8bd69ccfd201fa3c9eedb13caeff920774d1defd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is more of a convenience to let the driver identify itself in
debug logs and the monitor protocol.
Change-Id: I73351477e98d45d6344c180b8088bde29df6f7d9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bus that we notify over the monitor protocol is really driver
specific, so let each driver specify their bus type.
Change-Id: Ic3a086fcc06352dbf051e52cef5bf6b8696349ae
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With most boards there's no simple way to get access to the HCI
traffic. Simultaneously these boards only have one external UART for
the console. This patch introduces a protocol which combines both
normal logs and HCI logs over a single binary protocol sent over the
console UART.
The protocol is modeled based on the btsnoop/monitor protocols used by
BlueZ, and the first tool that's able to decode this is btmon from
BlueZ ("btmon --tty <tty>").
For platforms with two or more external UARTs it is still possible to
use CONFIG_UART_CONSOLE as long as the UART devices used are
different, however on platforms with a single external UART
UART_CONSOLE should be disabled if BLUETOOTH_DEBUG_MONITOR is enabled
(in this case printk/printf get encoded to the monitor protocol).
Origin: Original
Change-Id: I9d3997c7a06fe48e7decb212b2ac9bd8b8f9b74c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way when BLUETOOTH_DEBUG has been disabled we don't need to make
extra #ifdefs in application code to make it build without debug
support.
Change-Id: Iceabe0d700d571afae8b85c2c559ba372a883682
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If incoming pairing request would result in JustWorks pairing this
can be used to request consent from user for accepting it.
Change-Id: If0695d0e1bb010bade6a16abe1b57a2ce07856cc
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Now that the incoming ACL & HCI event pools can be defined externally
to hci_core.c there should be convenience macros to know what's the
minimum required buffer size for these pools.
Change-Id: I6f2a7322a3d77e1304e9d925767a1fd3471c76c7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
So far the assumption has been that the host stack manages all
incoming and outgoing buffers. For the incoming buffers (from the
controller) this has required hci_core.c to manage its own pools and
do the host flow control. This setup makes perfect sense for an
architecture where the controller resides remotely on a different CPU
& address space (i.e. the "traditional" HCI transport case).
When the stack runs on a system where the controller resides in the
same address space this setup doesn't work that well. In such a
scenario the incoming buffers are ideally created as low down in the
stack as possible (i.e. below HCI), which means that the current
hci_core.c cannot be responsible for managing their pools.
To allow for both types of architectures this patch introduces a new
BLUETOOTH_HOST_BUFFERS Kconfig option that can be selected to say that
host-side management is desired, or deselected to say that the
controller (residing in the same address space) takes care of managing
the incoming buffers.
So far the incoming buffer types were identified by hci_core.c by
looking at their "free pool" pointers, however as soon as the pools
are allowed to be somewhere else this doesn't work. To solve this we
now require a minimum user data size for all Bluetooth buffers and use
that to store the buffer type.
Change-Id: I14bc32007e3e3f17c654f71f79b520650028d7ce
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Keep a single bt_storage_* name space for current and future storage
APIs.
Change-Id: If158eb7408cce7c06cd8f98d78a061b9f9585265
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In many cases when we want to access the 'val' member of bt_addr_le_t
it's in situations where the type needed is actually bt_addr_t. To
avoid unnecessary typecasts in these places simply embed bt_addr_t
inside bt_addr_le_t.
Change-Id: I7eecf129bee1dcf085abc83ec2f32e1a10b0b5aa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial support for the Privacy Feature, including the ability to
manage a local IRK and to use Resolvable Random Addresses.
Change-Id: I1c70aea67078dd2a5d07f3b797c37746ebe9ab61
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial skeleton for the persistent storage API.
Change-Id: I7a6cc283aa88e7d861af18a6f0db2ed8c71e44a0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The shorter form "param" is used elsewhere and this helps avoid overly
long lines.
Change-Id: Ie76497b5bf30e72099d13a26db9cacb8cd2c9c79
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This allows to start (general or limited) BR/EDR discovery. Inquiry
is active until explicitly disabled by application. This is to keep
BR/EDR discovery API similar to LE scan API.
< HCI Command: Inquiry (0x01|0x0001) plen 5
Access code: 0x9e8b33 (General Inquiry)
Length: 61.44s (0x30)
Num responses: 0
> HCI Event: Command Status (0x0f) plen 4
Inquiry (0x01|0x0001) ncmd 1
Status: Success (0x00)
> HCI Event: Inquiry Complete (0x01) plen 1
Status: Success (0x00)
Change-Id: I946fbd881e6d0460be28a9975acd564ae32896e8
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
For now as local host works as pairing acceptor, the pairing context
flag is set when remote IO Capabilities is received.
Reply to the request uses remote's authentication requirement
cross-checked against predefined authentication methods that are based
on local and remote IO capabilities.
> HCI Event: IO Capability Response (0x32) plen 9
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
IO capability: NoInputNoOutput (0x03)
OOB data: Authentication data not present (0x00)
Authentication: No Bonding - MITM not required (0x00)
> HCI Event: IO Capability Request (0x31) plen 6
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
< HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
IO capability: DisplayYesNo (0x01)
OOB data: Authentication data not present (0x00)
Authentication: No Bonding - MITM not required (0x00)
> HCI Event: Command Complete (0x0e) plen 10
IO Capability Request Reply (0x01|0x002b) ncmd 1
Status: Success (0x00)
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
Change-Id: I0f95a58178618f06de16cce0e9d9cf6c85209677
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
According Core Spec 4.2 [Vol 2 Part E, 7.7.41], remote authentication
and IO capability requirements have defined valid ranges.
Change-Id: I0f7cfb79097abbf96b3fee79a757431b6beef665
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Extended Inquiry Result Event shall always have one report so there is
no need to iterate over array.
Change-Id: Id6c550074395666b36d4dc6b956c9e4ae4154938
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to create outgoing BR/EDR connection and cancel pending
connection before it succeed.
Change-Id: I5c08bb2e89f79c09fa7930f860d6080d902186a1
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Reorganizes mostly by using preprocessor (indirectly Kconfig options)
strictly LE-SMP related interfaces and security interfaces shared
between LE and BREDR connections.
Change-Id: I90daa36d72403cd5b73e6791714fcaf7f1fbe8e5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
bt_auth_cancel can be used to cancel any type of pairing.
Change-Id: Ia1a6ba834186ab6d5082d3eb473319c2d70cf4a7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This documents more in detail the behavior of the API, what callbacks are
involved and when they are called, etc.
Change-Id: I62994ed09a9e8b3f14dc3f8c792469a93aeefabc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This uses ATT Indicate Value command to indicate changes and wait for
confirmation response.
Change-Id: I123a00e374929d779f96a02440215c32c0e79423
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adds values to be validated during examining Secure Simple Pairing exchange IO
capabilities and bond types.
Change-Id: I3f25fa863b9a8a46c0a0e3c366e8b915c7db0bc7
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds HCI protocol type for Secure Simple Pair Complete event and enables the
event in controller.
Then implements the initial SSP Complete event handler with catching
the status of SSP process.
Change-Id: Ic7cc5b4cab8a1b4120285815c24eeb6483d748df
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables IO Capability Request event in controller.
Adds handler to react on controller's IO Capability Request event during
incoming pairing.
As a initial case respond to the request with negative reply setting
reason as 'pairing not allowed'.
Change-Id: I161c7ab7f1031a78cfa50444f41624232e5c5146
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables IO Capability Response event in controller and adds remote IO Capability
and authentication fields to connection object.
Initializes them using IO exchange values delivered in SSP IO Capability
Response event data set representing remote as a part of incoming pairing
process.
Change-Id: Ia73a912f6fb633d1d1bb086ef3af9a280ac5a864
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Turns on Secure Simple Pairing mode in controller. Since there's a prerequisite
the controller is 4.0+, turning the mode is unconditional.
Change-Id: Id4a10ccf8892a430b0daaa6750835516b17b7e8a
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Since the return value of these callbacks is a number of bytes ssize_t
is more appropriate than int.
Change-Id: I3406fb382975d62f51e7a195666d0ae88364fd2c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Document callbacks included in structs since they are also public API.
Change-Id: I8eda02b12172c54e8076208d8ea5ae246c650a3c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Document the parameters and expected return values of the read, write
and flush attribute callbacks.
Change-Id: I600da2ed64944986395520d7fae77fcb05b58e86
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce BT_GATT_ERR macro to make it possible for application
callbacks to return exact ATT error codes.
Change-Id: I971536508e75036fbddc40b3f33e5201e11940bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These are specified in the Core Specification Supplement.
Change-Id: Ieaa9f061666119bb430d77b0fd40b4891e515b81
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For now this only exposes the various ATT error codes.
Change-Id: If568782e90dca22871681d2d3b2d81ae4cb8e5e4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds CSC Service related UUID definitions.
Change-Id: I3fc77cd6561ccfd7de0d906c7ddcd5d8dac5bff9
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds Environmental Sensing Service related UUID definitions.
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Change-Id: Idd87139971fb3c992b7fb7e346ce2ea90553ad38
This can be useful for both LE and BR/EDR connections so it sits
outside of those specific structs. The values are intentionally
matching the HCI values so for the HCI case we can just do a direct
assignment.
Change-Id: Id78d304bb61e5fd941f2c35351758c1eecc6ab6a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Uses the correct doxygen formatting tags to identify variables.
Change-Id: Ia46d4e008eb7790383682ac33bd3d6dbc2a66a9d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
These are needed both by nble as well as the HCI stack and will likely
also be of use for applications.
Change-Id: Ifd10ae6df25151162d9d5491466324b4a42f5506
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add read parameters to read callabck
Merge bt_gatt_read_multiple functionality into bt_gatt_read.
This makes it easier for application to handle all types of reads
as same sematics is kept for them.
Instead of destroy callback, call read_func with NULL data to
indicated that read has completed. This makes it clear when
read is completed and parameters used for it are no longer needed.
Thanks to this application doesn't need to abuse user data destroy
callback for detecting if read has completed. Since destroy callback
is no longer needed it is removed.
Also note that bt_gatt_read doesn't take any user data parameter
and that destroy callback was acctually called with read parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_read_params.
Change-Id: I8d6ea136b1e61c1dae73cca868b53c48c45a5492
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This removes destroy callback for userdata as bt_gatt_subscribe
doesn't take any user data parameters and that destroy callback
was acctually called with subscribe parameters.
We assume subscription is active if bt_gatt_subscribe returned 0
(ie write command was sent). This is due to remote might be sending
notifications before reply to write.
Also note that bt_gatt_subscribe doesn't take any user data parameters
and that destroy callback was acctually called with subscribe
parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_subscribe_params.
Change-Id: I58ac9cd481ffa08ccc2d7a0464ca75f61fb280c5
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Applications should be able to update the connection parameters.
Change-Id: I446f64fcd0b27b605e636e566fb35a362a92de96
Signed-off-by: Louis Caron <louis.caron@intel.com>
Instead of destroy callback, call discovery_func with NULL attribute to
indicated that discovery has completed. This makes it clear when
discovery is completed and parameters used for it are no longer used.
Thanks to this application doesn't need to abuse user data destroy
callback for detecting if discovery has completed.
Also note that bt_gatt_discover doesn't take any user data parameter
and that destroy callback was acctually called with discovery
parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_discover_params.
Change-Id: Iec4eb9795975ef2555502e13a682e13ff37742e0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Applications that need it can retrieve the connection
parameters at any time, connected callback for example,
and eventually handle the connection update callback or
not, this gives maximum flexibility for handling these
parameters and requesting change.
Change-Id: Iba7d30ade045875ebc721fd332e031d9008e248c
Signed-off-by: Louis Caron <louis.caron@intel.com>
This type should only be used as a pointer.
Change-Id: Icf656f310344cecbde527e809af6d00dcfc7ef82
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
In anticipation of supporting a local static random address in the
future it makes more sense to call BT_LE_ADV_ADDR_PUBLIC
BT_LE_ADV_ADDR_IDENTITY.
Change-Id: I4826f1dfb50b54e13a35cbe7ee74e28641c81ad1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way we don't need a special BT_BYTES macro and avoid bugs coming
from wrongly counted number of bytes (which is now evaluated at
build-time).
Change-Id: Ic6319234a816fe2fab6229b3bb980d0e3503e241
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are no more users of this API, and the only user it had in the
past was quite a special corner case. Just remove it for the time
being.
Change-Id: I696139b493f9ca75530665de25a4a4e03fc0ac5b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce new UUID API with bt_uuid, bt_uuid_16 and bt_uuid_32
structs. The specific size structs are derived from the common bt_uuid
struct to make it possible to use CONTAINER_OF().
Change-Id: I9cb03c73406acb7768d410fdf29eae75d252163c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_l2cap_chan_send does actually return the number of bytes sent.
Change-Id: I9dd79da992577f2e1e8d30d42eeb0c398e48ff33
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In some cases we need the raw 16-bit UUID value instead of a full UUID
object. Add definitions of these values so that the code doesn't need
to do complicated tricks to get hold of them.
Change-Id: I98f276402f20fe03fea2777743f15ca7fcae42c6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adjusts encryption state name in connection complete event.
Change-Id: Ib7e6b2c5738ca9f5832e0e277d8f5718050f4bef
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds extern "C" { } blocks to header files so that they can be
safely used by C++ source files.
Change-Id: Ia4db0c36a5dac5d3de351184a297d2af0df64532
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds all valid link keys types available during legacy and SSP
authentication.
Change-Id: I42f2aba0122d33a984bd84c56b7a6a290f5e9e1d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Vinayak Chettimada