Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Maintain this HAL in its own repo:
git@github.com:zephyrproject-rtos/hal_openisa.git
and manage using west.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
split ext/hal/st into two modules:
- hal_stm32: For the code meant to run on STM32
- hal_st: For the code meant to drive ST components
Fixes#16316
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The OpenISA RV32M1 SoC has four CPU cores. Two of these are RISC-V
32-bit cores, which are named "RI5CY" and "ZERO-RISCY". (The other two
cores are ARM Cortex-M0+ and -M4.) This patch adds basic SoC
enablement for the RISC-V cores:
- basic dtsi, to be extended as additional drivers are added
- SoC definition in soc/riscv32/openisa_rv32m1 for RI5CY / ZERO-RISCY
- system timer driver for RI5CY, based on LPTMR0 peripheral
The timer driver will be generalized a bit soon once proper
multi-level interrupt support is available.
Emphasis is on supporting the RI5CY core as the more capable of the
two; the ZERO-RISCY SoC definitions are a good starting point, but
additional work setting up a dtsi and initial drivers is needed to
support that core.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Signed-off-by: Michael Scott <mike@foundries.io>
Add initial support for building Cypress PDL as part of Zephyr.
Signed-off-by: Nazar Chornenkyy <nazar.chornenkyy@cypress.com>
Signed-off-by: Oleg Kapshii <oleg.kapshii@cypress.com>
With recent changes to libmetal we can now include and build it directly
as a zephyr library rather than doing a recursive make. We remove
ext/hal/libmetal.cmake as part of this change and introduce a Kconfig
option for libmetal.
This is a partial fix for issue #7673.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This code component is used to add Zephyr support on iMX7 processors,
exclusively on Cortex M4 core, and to speed up the development process
it was decided to have it based on NXP FreeRTOS BSP implementation.
The source code was imported from the following folders:
FreeRTOS_BSP_1.0.1_iMX7D/platform/drivers
FreeRTOS_BSP_1.0.1_iMX7D/platform/devices
This source code depends on headers and sources from zephyr:
ext/hal/cmsis
Origin: iMX7D NXP FreeRTOS BSP Peripheral Driver
License: BSD 3-Clause
URL: https://www.nxp.com/webapp/Download?colCode=FreeRTOS_iMX7D_1.0.1_LINUX&appType=license
commit: no commit hash
Purpose: The peripheral driver wraps the H/W for i.MX7 M4 core
Maintained-by: External
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
The Silicon Labs Gecko SDK provides a set of low-level
header files that give access to different hardware
peripherals of Silabs EXX32 SoCs.
This patch adds build infrastructure files like Makefile
and Kconfig to introduce the Gecko SDK into Zephyr.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
Per ZEP-1958, Phase 2 of adding CC3220sf LaunchXL support,
was to "deprecate the CC3200 launchxl support in Zephyr
(redundant to the CC3220)."
Effectively, the CC3220 SOC replaces the CC3200.
This patch removes the following:
* the imported CC3200 SDK
* CC3200 SOC, board, DTS files.
* adjusts other files where cc3200 was mentioned.
Also, it fixes explicit references to CC3200 in generic
CC32xx driver files.
Jira: ZEP-1958
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The SimpleLink SDK actually encapsulates a family of devices,
of which cc32xx is just one device. Other devices can fit
under this SDK directory structure.
This expansion will also allow the import of the WiFi
host driver and its driver porting layer in the future,
inserted at the correct levels in the SimpleLink SDK
directory heirarchy.
Follow the URL (ending in "#directory-structure") referenced in
ext/hal/ti/simplelink/README which explains the SDK structure,
and where devices fit in.
Jira: ZEP-1958
Change-Id: I16515d3e3779de0d55d3b1b8e25029609d1f66c3
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The CC3220 SDK provides a peripheral driver library and hardware
register access header files for the Texas Instruments SimpleLink
CC3220S and CC3220SF SoCs.
The current version supported in Zephyr is CC3220 SDK 1.30.01.03,
downloaded from:
http://www.ti.com/tool/download/SIMPLELINK-CC3220-SDK
Jira: ZEP-1958
Change-Id: Ib278a6e067a621c589d6efd17cda6f75dc2a9cdb
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Atmel Software Framework (ASF) provides a set of low-level
header files that give access to different hardware
peripherals of Atmel's ICs.
This patch adds build infrastructure files like Makefile
and Kconfig to introduce ASF into Zephyr.
Jira: ZEP-976
Change-Id: I52eead376f6c1a057d6f03292ef77ff00f1b8708
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Nordic Semiconductor's Software Development Kit's HAL layer
provides a set of low-level header and sourcefiles that give access
to the different hardware peripherals of Nordic ICs.
This patch includes the new files in the build and refactors the Kconfig
and Kbuild files in ext/hal/nordic to acommodate for the presence of the
new HAL layer.
Change-Id: Ie8e1a4c9fcc7e9058a9d16a2692ef1789603aa53
Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Renames the Kinetis SDK (ksdk) to the MCUXpresso SDK (mcux) to reflect
the recent rebranding by NXP to include support for LPC and i.MX SoCs.
Temporarily leaves the config option HAS_KSDK to allow renaming each
shim driver in a separate commit.
Change-Id: I738f3687755fcd429a105e723fa25f1da815b519
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enable building CC3200 SDK driver peripheral library files in Zephyr.
The SDK provides convenience functions to access CC3200 hardware
peripherals, and header files with register definitions.
Jira: ZEP-1109
Change-Id: I89f1485b9f35320a253ae211a27168bb2288c8b7
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Add hidden configuration HAS_KSDK for SoCs to select if they have
support in the ksdk.
Change-Id: Ia4cd11901bc26d21a3bdfad6236d66656bb292cb
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
For CMSIS we now have HAS_CMSIS which needs to be added to the
SoC definition.
Instead of changing the main Makefile we now include a sub-Makefile
with all related header and library paths that are hosted in
ext/
Move redifintion of LIB_INCLUDE_DIR later to get variables defined
in Makefile.toolchain.*
Change-Id: I9f90f90247c2a66b4565427b89d4e1d4dd5c9622
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add missing Kconfig files and connections to expose Kconfig options
in ext/ directories. Fixup QMSI to only be exposed on platforms that
utilize it.
Change-Id: I6c6c5011b2bf2966f65aa8279dc594a244821956
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Ulf Magnusson