There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This generic video API can be used to capture/output video frames.
Once a video buffer is enqueued to a video device endpoint, device owns
the buffer and can process to capture (camera), output (disk, display),
convert (hw encoder)... User can then call dequeue to retrieve
the processed buffer (video driver ensure cache coherency).
Once dequeued, video buffer is owned by user (e.g. for frame
processing, display buffer update, write to media, etc...).
For each video-buffer, user needs allocate the associated frame buffer
via video_buffer_alloc. Buffer format is defined by video device
endpoint configuration. Video device can be controlled (e.g. contrast,
brightness, flip...) via controls.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Add documentation for the Websocket API, also add information how
to use the Websocket as a transport for other high level protocols
like MQTT.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove the documentation that incorrectly says that DT uses
Kconfig. DT no longer has access to Kconfig symbols.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Remove the common.dts file which has been used for a year.
common.dts at one point allowed us to conditionally add an MCUBoot
overlay based on Kconfig.
but since DT lost access to Kconfig options it has been unused.
The overridable variable DTS_COMMON_OVERLAYS, which by default points
to common.dts, is also unused in-tree, and any out-of-tree usage can
be ported over to use DTC_OVERLAY_FILE instead, so we remove the
variable as well.
This simplifies the configuration system.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Replace:
dt_chosen_reg_addr
dt_chosen_reg_size
dt_node_reg_addr
dt_node_reg_size
with:
dt_chosen_reg_addr_int
dt_chosen_reg_size_int
dt_chosen_reg_addr_hex
dt_chosen_reg_size_hex
dt_node_reg_addr_int
dt_node_reg_size_int
dt_node_reg_addr_hex
dt_node_reg_size_hex
So that we get the proper formatted string for the type of symbol.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some of this information is stale and needs to be fixed.
Try to make a few other things clearer while we're here.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Flash page layout API was omitted by documentation as it
is optional.
Added tag which turn it on to doxygen setup which allows
to include missing API documentation.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Links to doxygen-generated API content are displayed as monospaced code
spans in the text, but have no indication that they're are clickable
links. Tweak the CSS to color the monospaced text the same as regular
links in the text (blue) and after visited (purple). This might also
help us notice doxygen API references that aren't creating links (and
should).
Fixes: #20032
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update conf.py to add the v1.14.1 release docs to the master docs
version pick list, and remove the original v1.14.0.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Document why and how we use the devicetree nexus map properties to
preserve devicetree flag specifications.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Paths like soc//arm/... showed up in the output due to the extra '/' at
the end of the SOC_DIR value. Remove the redundant '/' in SOC_DIR and
other environment variables that get referenced in the Kconfig files.
Kconfiglib never normalizes paths, because it avoids some gotchas, e.g.
with symlinks.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clarify the roles and responsibilities of the Zephyr community
and contributors with respect to PRs, Bugs, and Features.
Signed-off-by: David Leach <david.leach@nxp.com>
Extend the specifications passed to --modules to add the form
<title>:<suffix>:<path>:<index description filename>
<index description filename> points to a file that contains RST that is
inserted at the top of the index page.
If no filename is passed, the old default description is used.
Also add three flags --top-index-desc, --non-module-index-desc, and
--all-index-desc for customizing the text at the top of non-module index
pages.
This functionality is currently unused in Zephyr, but will probably be
used later. It's being added for a downstream project.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit updates the settings backend documentation
to clearly state that it cannot provide old entities
before the final one.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Add a --modules flag to genrest.py for generating separate index pages
for symbols defined within certain paths.
Passing
--modules Shell🐚subsys/shell Storage:storage:subsys/storage
will generate these index pages, instead of a single index.rst file:
- index-shell.rst: Lists the symbols defined in subsys/shell
- index-storage.rst: Lists the symbols defined in subsys/storage
- index-main.rst: Lists all symbols that are not in subsys/shell or
subsys/storage
- index-all.rst: Lists all symbols
- index.rst: Contains links to the other index pages
The string before the first ':' ('Shell' and 'Storage' above) is used
when generating the title of the index page. 'Shell' gives
'Shell Configuration Options', for example.
The title for index-main.rst can be set by passing
'--non-module-title <title>'. It defaults to "Zephyr".
By default, paths in symbol information pages that are within modules
are shown as '<title>/<path relative to module>'. This can be disabled
by passing --keep-module-paths.
--keep-module-paths would make sense for the example above, but
stripping the path to the module is nice when dealing with modules
defined outside the Zephyr repository.
If a symbol is defined in multiple modules (or both in a module and
outside all modules), it will appear on multiple index pages.
This commit also simplifies how genrest.py is called a bit, making the
Kconfig filename optional (default: Kconfig).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
For a long time, release notes were titled "Zephyr Kernel x.x.x". With
the 2.0 release the title was changed to "Zephyr RTOS 2.0.0" and for the
1.14.1 update the title was "Zephyr 1.14.1" and for the 2.1.0 working
draft the title went back to "Zephyr Kernel 2.1.0". The end result was
the release notes index looking like this:
Zephyr Kernel 2.1.0 (Working Draft)
Zephyr RTOS 2.0.0
Zephyr 1.14.1
Zephyr Kernel 1.14.0
Zephyr Kernel 1.13.0
Zephyr Kernel 1.12.0
Zephyr Kernel 1.11.0
I think the intention was to drop the "Kernel" name (since the release
is more than a kernel), so let's make the release notes titles
consistent by calling post 1.14.0 release notes "Zephyr x.x.x"
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
found some references to files (via :zephyr_file: and :zephyr-app:) that
were moved, so the links were broken
Fixes: #19660
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
DTSpec writes this as a single word, presumably to make it easier to
grep for / more precise. Follow along in the rest of the docs now that
our main DT docs page agrees with this usage.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The K6X example is part of the wrong subsection (devicetree vs
kconfig) currently. Move it up to the right place (the section which
was recently renamed to "input and output files")
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Re-work the introductory sections of the devicetree documentation,
adding several figures and cross-references to other useful parts of
the documentation.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Device tree overlays are a bit of a stumbling block. Try to add more
cross-references and examples for how to use them to the application
development doc and the west build page.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
It is now possible to override a shield variant configuration
for a specific board. Get it documented.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Shields subsystem provides the possibility to override configuration
for boards and to define variants.
Reflect this in documentation.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
SMP had API-level docs, but no architecture-level description.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Changed return parameter description from
"@retval filter id on success" to
"@retval filter_id on success".
This change suppresses the doxy warnings.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit adds a lot more documentation to the Controller Area
Netwok API. The documentation is move to the networking section.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit adds new k_work_poll interface. It allows to
submit given work to a workqueue automatically when one of the
watched pollable objects changes its state.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Give an example for an interrupt controller, where 'interrupt-cells'
should be used instead.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
PR #19493 cleaned up the turbo-mode process for doc generation but
introduced an error in the generated index.rst that causes use of the
"make htmldocs-fast" (so-called turbo mode) to fail with an error -
the generated list-table directive has no content (other than
the header row). This PR adds one dummy row.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Putting overlay files in the test/sample root clutters the file
system. Allow them to be in the boards subdirectory alongside
board.conf files.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
KCONFIG_TURBO_MODE being twisted up in the normal logic made the code
hard to follow and change.
Use a separate write_dummy_index() function for KCONFIG_TURBO_MODE
instead, and add more documentation for it. Also get rid of options.rst
and just write all the symbol link targets directly to the dummy index
file, which is a bit simpler.
As a small piggybacked improvement for default values, make the heading
'default' instead of 'defaults' when there's only one. The menuconfigs
do this too.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
k_cpu_idle() and k_cpu_atomic_idle() were being directly
implemented by arch code.
Rename these implementations to z_arch_cpu_idle() and
z_arch_cpu_atomic_idle(), and call them from new inline
function definitions in kernel.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A few new contributors, after reading the uncrustify section
of the contribution guidelines, have decided to run
existing Zephyr files thru uncrustify, and include in commits
with minor fixes lots of styles changes.
This is something we do not want to encourage.
To avoid this, modify a bit the uncrustify section to
discourage people from doing just that.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Add diagram showing the current system power management and the central
method of device power management.
The diagrams were made using draw.io and can be edit using draw.io.y
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Jukka Rissanen