The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This is joint work with Kumar Gala (see signed-off-by).
Document the changes to the generated node macros in macros.bnf,
moving the old file to legacy-macros.bnf and putting it in its own
section.
The actual generated macros are now a low-level detail, so rewrite the
foregoing sections as examples in terms of the new <devicetree.h> APIs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Name all subsystem reference consistently with an '_api' postfix and
clean up naming and folder structure in some cases.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Various kconfig symbols where defined specifically for board
nucleo_l432kc. Though, most are generic to the sample so should moved
directly to sample prj.conf
Some others parts of boards default configuration so could be removed
as well.
Last remove CONFIG_OPENOCD_SUPPORT as sample has no dependency with
this symbol.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Sample code that showcase PECI API get device CPU information
then monitors temperature.
Verified in Modular MEC1501 connected to computer (PECI host).
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Add sample of how to handle eSPI host warnings when these are
intercepted by app code.
Replace printk with logging macros to standardize the sample.
Log additional details about peripheral channel notifications.
Remove unnecessary trailing \n from logging messages.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Coverity thinks this is a long because FLASH_TEST_REGION_OFFSET is a
signed value. Zephyr doesn't use standard types so make it a u32_t.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
To ease maintenance of samples and tests some SoCs define
CONFIG_WDT_DISABLE_AT_BOOT=y to disable the watchdog. Ensure the option
is set to n for samples and tests that require watchdog module not to be
disabled during boot.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The one page on devicetree is too long. Split it into multiple pages
to make it easier to digest and more squintable. This is basically
just moving content around; minimal changes have been made apart from
redoing some transitions and adding a couple of introductory paragraphs.
Rename the 'device-tree' Sphinx :ref: target while we are here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add sample for AES Galois/Counter Mode (GCM) of operation with a MACsec
GCM-AES test vector.
Also improve existing code by declaring expected ciphertext arrays as
constant.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
The loramac-node library uses math functions from math.h that
are not included in the minimal lib.
This commit changes the samples project config to always build
with newlib and adds a dependency to newlib.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Add STM32 CRYP driver support and a corresponding build-only test to
the crypto sample project.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
Try and build the flash_shell on all platforms that have a flash driver
rather than a limited set of know platforms. This hopefully acts as a
build coverage test for all the flash drivers.
The flash shell requires around 10K of memory so limit it to systems
with 12K or more.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Treat Kconfig-specific GPIOs as active-high (default) and use the
logic-level API to interact with them.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Convert to the new API, using raw access since there is no Device-Tree
definitions for this particular sample.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Conver to the new GPIO API, using raw access since there is no DT
definitions for this particular usage of the pins.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This adds a board overlay for up_squared to be used with
the GPIO sample. Using the overlay is because the pins
being used are not actually LED and switch but GPIO pins
used as such.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Convert the GPIO based driver to the new GPIO API. (Only the
gpio_configure() call is affected).
Move configuration to DT where appropriate for both SPI and GPIO
drivers, only leaving the SPI vs. GPIO decision in Kconfig (in
addition to the basic enable for the driver.) Move some files around
to clean up as a result of this change.
led_ws2812 sample changes:
- make the pattern easier to look at by emitting less light
- use led_strip alias from DT to get strip device, allocate
appropriate struct led_rgb buffer, etc.
- move the pins around and remove 96b_carbon support (I have no board
to test with)
GPIO driver specific changes:
- str is required to write OUTSET/OUTCLR, not strb. The registers
are word-sized.
- the str[b] registers must all be in r0-r7, so "l" is the correct GCC
inline assembly constraint for both "base" and "pin"
SPI driver specific changes:
- match the GPIO driver in not supporting the update_channels API
method, which never made sense for this type of strip
- return -ENOMEM when the user tries to send more pixel data
than we have buffer space for instead of -EINVAL
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Switched from deprecated gpio_pin_write to gpio_pin_set and also add the
LED GPIO flags to the gpio configuration.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
Implement the new GPIO driver APIs for the HT16K33 and update the
driver to use the new GPIO flags.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Extends the keyboard scan callback row and column arguments from 8-bits
to 32-bits to support a touch panel driver implementation.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adjust the configuration file, disable the SPI
driver and enable the QSPI driver and flash node.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Kamil Lazowski <Kamil.Lazowski@nordicsemi.no>
Change to display RSSI and SNR values of the received data.
This change helps to test LoRa's communication distance and
communication quality.
Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
Introduce a new counter API function for reading the current counter
value (counter_get_value()) and deprecate the former counter_read() in
favor of this.
Update all drivers and calling code to match the new counter API.
The previous counter driver API function for reading the current value
of the counter (counter_read()) did not support indicating whether the
read suceeded. This is fine for counters internal to the SoC where the
read always succeeds but insufficient for external counters (e.g. I2C
or SPI slaves).
Fixes#21846.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
This commit introduces the can-primary alias to identify
the primary CAN interface.
This alias is used for all samples and tests, so they don't
need to probe the right interface.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
drivers/display.h was being included both as a double-quote direct
include and an angle-quote in the drivers parent directory. Both
resolve to the same file. Remove the unqualified reference.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Added harness config to sample in order for the sanitycheck tool
to run and understand whether the samples output is as expected.
Signed-off-by: Łukasz Hejnak <lukasz.hejnak@nordicsemi.no>
The regular expressions used by this test to determine
success or failure get confounded if the log subsystem
drops the wrong messages due to buffers being full.
Just use minimal logging which synchronously logs
everything.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some drivers may be unable to write less than 4 bytes. Increase the
test to use at least 4 bytes and refactor so the logic is no longer
explicitly size-dependent.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Rename global variable ciphertext used in cbc_mode() to
cbc_ciphertext and move it closer to cbc_mode(). Also, move
global variable iv into cbc_mode() to be consistent with
other *_mode() methods.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Andrzej Głąbek