Refactors existing menu by putting as topmost selectable option
general bluetooth subsystem support instead so far Low Energy (LE).
Implication of the change is introduction of new BLUETOOTH_LE config
flag. The flag needs to be propagated to all existing bluetooth
related apps to make them buildable.
Change-Id: I608c1baad038e0ee4cccf44a3e597e16ae1f7f54
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
With this patch application can unsubscribe notifications
from Subscribe value callback directly, if BT_GATT_ITER_STOP
is returned.
Change-Id: I7873594f5dbe6e8c5bef11bf397a74cdc870a464
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch refactor reading of attribute values as a client.
Current MTU size is taken into account to determine if read
procedure has been completed or not.
For now, read procedure will be continued until whole is read,
or stopped by client.
Core Specification says that "The Read Blob Request is repeated
until the Read Blob Response’s Part Attribute Value parameter is
shorter than (ATT_MTU – 1)." (Vol 3, Part G 4.8.3)
Because application didn't know the current MTU value,
there was no way to determine if data received is complete.
Change-Id: I9d0e3f8638b58c3a4e39060333aedc133b775e3d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
We want to make the naming convention ref/unref rather than get/put.
So far the only reference counted objects are the buffers and the
connections. For the buffers the new generic buffer API will also use
ref/unref.
Change-Id: I9fe8b8a6a50a8baf06ba231e8f6717a5a47dd292
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This allows to not compile SMP support for devices that don't
require pairing. It is required to support SMP channel and reply
with error for any command received even if pairing is not supported.
To handle this cleanly a null smp implementation is used that case.
Change-Id: I656a52dac882839db904eee65f25a4e29ea2d8c2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to specify which roles are supported. Broadcaster and
Observer roles are always supported.
Image size reduction for samples apps:
beacon 43148 -> 15196
central 46892 -> 46356
peripheral 47532 -> 45940
Change-Id: If260c13d63651b9b54df5bafc2c412b01dcb1eb0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
bt_gatt_subscribe requires setting proper value in the parameters ever
since indication support was introduced.
Change-Id: Ib78dac717874e51e21bc9f8ad10279ba9fe68097
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add discover type to bt_gatt_discover_params to the API is reduced to
just bt_gatt_discover, this should simplify adding support for
discovering secondary and included services.
Change-Id: Iadeed86fed115afee1340b2c09821d7fafdda0f4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If bt_gatt_subscribe -EALREADY that means it is already subscribed and
shall not be reused.
Change-Id: I83c620454c40863c71b1289d37c2b42571a907fd
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We need to be able to perform the init procedure asynchronously
through a callback. The RX fiber is a good candidate to use for the
callback since it's not active in its normal operation before
drv->open has been called. In order to prepare for a future
bt_disable() API the init API is renamed from bt_init() to
bt_enable(). If a NULL pointer is given as the callback the API
behaves synchronously like the old bt_init().
Change-Id: I4e78fa8f32dcf5477ea05a8db75aca5cdce591fd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes the central sample discover the attributes and subscribe
to receive notifications of HeartRate Measurement Characteristic.
Change-Id: Icedbdd759638be0b8fa8515112208aa61ad5eb90
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes central sample to parse the Advertising Data and in case the
device supports HeartRate Service stop scanning and connect to it, if the
device disconnects then start scanning again.
Change-Id: I49962eadb5c82c7a910185212063cd576cadf62e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This will be needed to monitor connections with peripherals.
Change-Id: Iccea2696af72b0b8b3f40aac180738dc6b80abc8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With this patch advertising state and scanning state are stored as flags.
Change-Id: I5d2dc37972620ee89aaf55d45e294e8be82863d3
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Change-Id: I50f0f4548fdf5c79c783f4055974e427ba9cbfe8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The online help ./scripts/sanitycheck --help describes usage.
Most users will simply want to run with no arguments.
Change-Id: Icedbbfc22599a64a6e3dbbb808ff3276db06f2e0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Renames supported platform configurations to conform to new platform
configuration naming scheme.
Example usage with PLATFORM_CONFIG:
make PLATFORM_CONFIG=basic_cortex_m3
make PLATFORM_CONFIG=basic_atom
make PLATFORM_CONFIG=basic_minuteia
make PLATFORM_CONFIG=galileo
xxx_ti_lm3s6965_defconfig -> xxx_basic_cortex_m3_defconfig
xxx_generic_pc_atom_n28xx_defconfig -> xxx_basic_atom_defconfig
xxx_generic_pc_minuteia_defconfig -> xxx_basic_minuteia_defconfig
xxx_quark_defconfig -> xxx_galileo_defconfig
Change-Id: I696eb8b9ad9a72d7a72efbe1341ce23500335764
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Uses PLATFORM_CONFIG to specify the configuration file instead of
KBUILD_DEFCONFIG. This name is more intuitive to Zephyr users and
it is not tied to kbuild.
Example usage:
make PLATFORM_CONFIG=generic_pc_atom_n28xx
make PLATFORM_CONFIG=generic_pc_minuteia
make PLATFORM_CONFIG=quark
make PLATFORM_CONFIG=ti_lm3s6965
make PLATFORM_CONFIG=fsl_frdm_k64f
Change-Id: I177608942c3e77c2f152743c862aad1d460c0e33
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes default KBUILD_DEFCONFIG to xxx_generic_pc_atom_n28xx_defconfig as
the xxx_generic_pc_defconfig configuration will not be supported in the future.
Note that like generic_pc, atom_n28xx runs on QEMU.
Change-Id: I49c5708e4b24dbf723eefc1efddfea4174d9cb1c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Bluetooth sample projects now use KBUILD_DEFCONFIG instead of BSP. This is
a necessary step in transitioning from BSPs to platforms.
Change-Id: I42c89d0b5c3d7de7ea62297950bb00f56ca97ed2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Enables sending LE discovery results to user app.
Updates central apps to use new scan API.
Change-Id: Id319c96e15554f2eed4cf507cddd114ca74aa8e5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
According to section 3.7 of Documentation/kbuild/makefiles.txt, using
EXTRA_CFLAGS in Makefiles is "still supported but their usage is
deprecated."
Change-Id: I585a9f84e8239a59b0f5b29eed0dc70efa253522
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
The file extension indicates a "Microkernel DEFinitions" file,
and no longer reflects the obsolete VxMicro/Viper branding.
Change-Id: Ib95b271404a4a4737e851d603c371244fa609e4d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This commit changes the build parameter CONF_OVERLAY with the
name CONF_FILE.
Change-Id: I404a4aa87b167a9ca4e7b395d53c2f7794b232bc
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
There's no point in enabling BLUETOOTH_DEBUG_HCI_CORE for the samples
as the user/developer is unlikely to be interested in this specific
sub-module of the Bluetooth stack. The samples already have the
BLUETOOTH_DEBUG enabled, so leave it up to the user/developer to
decide if they want to add specific sub-module debug options.
Change-Id: I327086464561667a2462db0aab00d0ffcdd40d4c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the includes in the sample apps to match what their actual
dependencies are.
Change-Id: I6fdfa4ba0cda563433d51f0ec35fef8f2ee0fa40
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use scan functionality by simple app that starts LE scan
and in a while stops it.
It uses basic HCI scan interface prepared for
supporting LE central role feature.
Change-Id: Idcde4c742290d46931ab86522e51b0fc547a2d42
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Arkadiusz Lichwa