Same deal as in commit 4638652214 ("Kconfig: Use 'default' instead of
'def_bool' in Kconfig.defconfig files"), fixing new stuff that got
introduced since then.
Some symbols, like ALTERA_AVALON_PIO, are only defined in
Kconfig.defconfig files, and so need the def_bool.
Motivation (from the note at the end of
guides/kconfig/index.html#common-shorthands):
For a symbol defined in multiple locations (e.g., in a Kconfig.defconfig
file in Zephyr), it is best to only give the symbol type for the "base"
definition of the symbol, and to use 'default' (instead of 'def_<type>'
value) for the remaining definitions. That way, if the base definition
of the symbol is removed, the symbol ends up without a type, which
generates a warning that points to the other definitions. That makes the
extra definitions easier to discover and remove.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A parallel PCI implementation ("pcie") is added with features for PCIe.
In particular, message-signaled interrupts (MSI) are supported, which
are essential to the use of any non-trivial PCIe device.
The NS16550 UART driver is modified to use pcie.
pcie is a complete replacement for the old PCI support ("pci"). It is
smaller, by an order of magnitude, and cleaner. Both pci and pcie can
(and do) coexist in the same builds, but the intent is to rework any
existing drivers that depend on pci and ultimately remove pci entirely.
This patch is large, but things in mirror are smaller than they appear.
Most of the modified files are configuration-related, and are changed
only slightly to accommodate the modified UART driver.
Deficiencies:
64-bit support is minimal. The code works fine with 64-bit capable
devices, but will not cooperate with MMIO regions (or MSI targets) that
have high bits set. This is not needed on any current boards, and is
unlikely to be needed in the future. Only superficial changes would
be required if we change our minds.
The method specifying PCI endpoints in devicetree is somewhat kludgey.
The "right" way would be to hang PCI devices off a topological tree;
while this would be more aesthetically pleasing, I don't think it's
worth the effort, given our non-standard use of devicetree.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
* the nsim host timer does not work as expected,
disable it, use cycle count to simulate timer tick
* optmize the freq definition of nsim_em
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Add SYS_POWER_ prefix to HAS_STATE_SLEEP_, HAS_STATE_DEEP_SLEEP_
options to align them with names of power states they control.
Following is a detailed list of string replacements used:
s/HAS_STATE_SLEEP_(\d)/HAS_SYS_POWER_STATE_SLEEP_$1/
s/HAS_STATE_DEEP_SLEEP_(\d)/HAS_SYS_POWER_STATE_DEEP_SLEEP_$1/
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit cleans up names of system power management functions by
assuring that:
- all functions start with 'sys_pm_' prefix
- API functions which should not be exposed to the user start with '_'
- name of the function hints at its purpose
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
There exists SoCs, e.g. STM32L4, where one of the low power modes
reduces CPU frequency and supply voltage but does not stop the CPU. Such
power modes are currently not supported by Zephyr.
To facilitate adding support for such class of power modes in the future
and to ensure the naming convention makes it clear that the currently
supported power modes stop the CPU this commit renames Low Power States
to Slep States and updates the documentation.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Since commit 0906a51dac, the driver
fails the test: tests/drivers/adc/adc_api. Some of the workflow
turns out to be incorrect (e.g. not doing dummy conversion after
getting out of deep power down, and not clearing interrupt status
bits). So take some time to overhaul the driver. Also rename
the driver to adc_intel_quark_se_c1000_ss because the inner
working of this driver is tied to Quark SE C1000 SoC.
Fixes: #12632
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Maybe this is some "just in case" thing that got copied around. There's
no need to have a blank line at the beginning or end of Kconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Previous rename from CONFIG_* to DT_* left a few remaining
CONFIG_*. So rename them manually now.
Fix#13753
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
CPU_LPS_n name used to indicate a low power state is cryptic and
incorrect. The low power states act on the whole SoC and not exclusively
on the CPU. This patch renames CPU_LPS_n states to LOW_POWER_n. Also
HAS_ pattern for Kconfig options is used in favor of a non standard
_SUPPORTED. Naming of deep sleep states was adjusted accordingly.
Following is a detailed list of string replacements used:
s/SYS_POWER_STATE_CPU_LPS_(\d)_SUPPORTED/HAS_STATE_LOW_POWER_$1/
s/SYS_POWER_STATE_CPU_LPS_(\d)/SYS_POWER_STATE_LOW_POWER_$1/
s/SYS_POWER_STATE_DEEP_SLEEP_(\d)_SUPPORTED/HAS_STATE_DEEP_SLEEP_$1/
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit removes dependency on SYS_POWER_LOW_POWER_STATES_SUPPORTED,
SYS_POWER_DEEP_SLEEP_STATES_SUPPORTED Kconfig options. Power management
SYS_POWER_LOW_POWER_STATES, SYS_POWER_DEEP_SLEEP_STATES options depend
now directly on specific power states supported by the given SoC. This
simplifies maintenance of SoC Kconfig files.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Some of power states used numerical suffix while otthers not.
This commit adds proper suffix to all power state names.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
f
This commit simplifies OS <-> Application interface controlling power
management. In the previous approach application-based PM required
overriding sys_suspend() and sys_resume() functions. As these functions
actually implemented power state change, in such case application
basically had to provide own implementation of all PM-related stuff,
which was not portable and hard to maintain.
This commit changes this scheme: The sys_suspend() and sys_resume()
are now system functions while the application could either use
built-in power management policies or provide its own. All details
of power mode switching are now handled by the OS.
Also, this commit cleans up the Kconfig options related to system-level
power management grouping them under common CONFIG_SYS_PM_ prefix.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit changes the names of SYS_POWER_DEEP_SLEEP* Kconfig
options in order to match SYS_POWER_LOW_POWER_STATE* naming
scheme.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SYS_POWER_LOW_POWER_STATE_SUPPORTED and SYS_POWER_LOW_POWER_STATE
suggests one low power state but these options control multiple
low power state. This commit uses plural in the names to indicate
that.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
error: a label can only be part of a statement and a declaration is not
a statement u32_t limit = _arc_v2_aux_reg_read(_ARC_V2_TMR0_LIMIT);
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit enables fine-grained power state locking.
Now, each power state could be independently enabled or disabled.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Currently each SoC has to define own list of power states.
However all these definitions have to be the same, as common power
management code uses them.
This commit replaces per-soc power state list by global definition.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Use built-in by default. We do not use external library of QMSI anymore
and rely on integrated HAL. Remove this option and simplify HAL
configuration.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
* i2c, spi, gpio are not tested, remove them now.
* fix the license issue in openocd.cfg
* fix the shell related setting
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The initial support of iotdk which is a board based on Synopsys
ARC IoT SoC.
In this commit, it includes
* processor support
* UART driver
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The various linker scripts on arc would include autoconf.h in the arch
linker script but might have CONFIG_ symbols referenced in the soc
specific linker script. Move autoconf.h inclusion to top of the soc
specific linker script out of the arch specific one so we know
autoconf.h is seen before any CONFIG_ references.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When users are configuring applications they are given the option
to enable the DesignWare SPI driver. But they should not be given this
option on SoCs that don't have the DesignWare SPI HW.
This commit hides the driver by default by introducing the config
option HAS_SPI_DW.
Fixes: #10825
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
All drivers require DTS for their primary SPI settings.
Removing SPI_[0-9]_NAME config option added some more samples changes.
Usage of these options there was anyway not relevant.
Fixes#11064
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The majority of cases of CONFIG_I2C_x_IRQ_PRI should be
DT_I2C_x_IRQ_PRI. So go ahead and fix them up. Only the i2c_nios
driver still uses Kconfig for getting priority.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
With the DT_ prefix change we missed adding prefixes in dts_fixup.h
on snps_emsk & snps_nsim for ARC_ICCM_0_BASE_ADDRESS and
ARC_ICCM_0_SIZE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This can help find unused symbols. Those end up without a type if
'default' is used instead of 'def_bool', which generates a warning.
Search for "Kconfig.defconfig" in
https://docs.zephyrproject.org/latest/application/kconfig-tips.html for
a longer explanation.
Keep the 'def_bool' for the following symbols, which seem to be
deliberately defined only in Kconfig.defconfig files:
- ALTERA_AVALON_I2C
- ALTERA_AVALON_MSGDMA
- ALTERA_AVALON_PIO
- ALTERA_AVALON_QSPI
- ALTERA_AVALON_SYSID
- CLOCK_CONTROL_IMX_CCM
- CPU_EM4_DMIPS
- CPU_EM4_FPUDA
- CPU_EM4_FPUS
- FP_FPU_DA
- I2C_GECKO
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
All labels containing "_<8-hex-digits>_" or "16550_<3or6-hex-digits>_"
in their names, assumed to be generated by the extracting script,
are updated with the DT_ prefix, to reflect the recent changes made
to the script.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
When users are configuring nRF applications they are given the option
to enable the DesignWare I2C driver. But they should not be given this
option because nRF SoCs do not have DesignWare I2C HW.
This commit hides the driver by default by introducing the config
option HAS_I2C_DW.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
patch adds the device binding for qmsi watchdog and device node
for socs which are using wdt qmsi driver.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Wayne Ren