Currently, we always set the content-format as "plain/text" when
it is unrecognized. This is wrong for it's possible that payload
is actually something else.
For example, we don't support JSON as incoming format right now.
But if I send a PUT request to /1/0/1 (server objectinstance/lifetime
resource) with value 3200 in JSON format: {"e":[{"n":"","v":3200}]}.
The client will still handle the request and respond with changed (2.04)
except the lifetime resource is updated incorrectly due to parsing
error.
Correct the behavior by not setting a default format and respond with
content-format-not-support error code (4.15)
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
net_pkt_append() has been changed. If payload reached max value
of 'data_len' in net packet, net_pkt_append will not append.
So the caller has to create new packet and append remaining payload.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Unlinking of neighbor also needed after nbr_unref. Otherwise
neighbor id is still in use and can not be linked further.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When a node receives DIO message from peer then node adds peer as
a neighbor (nbr with linklayer address). But when a node receives
DAO message from different peer (chances are peer selected
different route to reach this node), remove peer with previous
link layer address and add as a neighbor with new link layer address
with new route information. Now node can properly route packets to
peer from neighbor table or based on nexthop information from
routing table.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When a node joins in DAG network, it chooses neighbor (node or border
router) as its parent. But if it receives DIO message from another
peer, it can only act as a neighbor, not as a parent. If peer rank
is better than current preferred parent rank then node will select
new peer as it's best parent.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
RPL prints lot of debug information which is difficult to track.
Minimized debugs in timer specific information and parsing of
DIO and DAO options. Also fixed alignment issues (no changes in
functionality)
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Do not even consider the push event if CONFIG_NET_MGMT_EVENT_INFO
enabled and info length is more than NET_EVENT_INFO_MAX_SIZE.
Print error message and ignore the event.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current default value for NET_RPL_INIT_LINK_METRIC is 2, changing it
to 1.
e.g. NET_RPL_MIN_HOP_RANK_INC is 256 and NET_RPL_MC_ETX_DIVISOR is 256.
Rank calculation for nodes is
rank_increase = CONFIG_NET_RPL_INIT_LINK_METRIC *
NET_RPL_MC_ETX_DIVISOR;
Which gives 768 for first set of child nodes. It would be good if
CONFIG_NET_RPL_INIT_LINK_METRIC value is 1 and nodes ranks will be
245, 512, 768 based on the path they choose.
User can absolutely change their configuration to maintain proper ranks.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When CONFIG_NET_RPL enabled, do not run DAD (duplicate address
detection) for global addresses. In RPL mesh network global addresses
for nodes are determined by prefix from Border Router. DAD is not
necessary in this case.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If CONFIG_NET_MGMT_EVENT_INFO is enabled then provide mgmt info
about the route, which is added or deleted.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If CONFIG_NET_MGMT_EVENT_INFO is enabled then provide mgmt info
about the neighbor, which is added or deleted.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Remove any routes with neighbor as a nexthop first and then remove
neighbor from neighbor table.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Provided separate event information structs based on events. This way
user will know what kind of information will be received to that
particular event.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When net_ipv6_prepare_for_send() needs to route packets, it missed
updating of RPL header.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Doing neighbor discovery in RPL network is not necessary and
that can be disabled in RPL nodes. Unfortunately the border
router needs to have ND enabled as it has also non-RPL network
interfaces in use. So in this case, mark RPL node as always
reachable.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As this is very specialized info which is not normally needed,
do not print it by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Introduce CONFIG_NET_ROUTING option that allows the IP stack
to route IPv6 packets between multiple network interfaces.
No support for IPv4 routing is implemented by this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removes variable shadowing another declared
previously but does not change anything
functionally.
Signed-off-by: Juan Manuel Torres Palma <j.m.torrespalma@gmail.com>
prepare_segment() returned NULL in case of any error, which then
net_context_send() translated into -EINVAL. That's highly confusing
though, because a common case of failure for prepare_segment() is
being unable to allocate data fragment(s) (for TCP header, etc.)
So, return output pkt by reference, and detailed error status as
a return value.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
A few lines earlier the code bails out in case len is 0. Checking for
buf->len < 1 is the same as checking for buf->len == 0. Since len is
guaranteed to be > 0 here the check len > buf->len implicitly checks
for buf->len == 0, i.e. the second test can be removed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
During the CoAP API change, slight changes were made the ref / unref
packet pending process. Let's re-align with the coap-client sample
in how we apply the packet refs in retransmit_request() and also
replace the lwm2m_send_message() call with a direct call of
net_app_send_pkt(). This avoids a second processing of the pending
packets and keeps the ref/unref flow cleaner.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
During the CoAP API change, the way packets were ref'd and then
unref'd in order to stop the packet sending functions from releasing
the net_pkts was changed and never updated in the LwM2M library.
Let's use coap_pending_cycle() and coap_pending_clear() to do the
ref/unref the same way as the coap-client samples in order to
match the pending process with the current CoAP APIs.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Fraction could be stored with negative value.
The implementation was only considering the positive value case.
Therefore, we have to modify the code to take care of the case.
To test it
======================================================================
1. launch eclipse/wakaama lwm2m server
2. launch zephyr lwm2m client and wait for registration completed
3. Issue commands from server
* attr 0 /1/0/1 -0.1 0.1
* disc 0 /1/0
Current output
----------------------------------------------------------------------
Client #0 /1/0 : 2.05 (COAP_205_CONTENT)
105 bytes received of type application/link-format:
</1/0>,</1/0/0>,</1/0/1>;gt=0.1;lt=0/00000,</1/0/2>,</1/0/3>,</1/0/4>,
</1/0/5>,</1/0/6>,</1/0/7>,</1/0/8>
Expected output
----------------------------------------------------------------------
Client #0 /1/0 : 2.05 (COAP_205_CONTENT)
102 bytes received of type application/link-format:
</1/0>,</1/0/0>,</1/0/1>;gt=0.1;lt=-0.1,</1/0/2>,</1/0/3>,</1/0/4>,
</1/0/5>,</1/0/6>,</1/0/7>,</1/0/8>
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Add OpenThread to Zephyrs net stack as data link layer.
OpenThread requires to call process function when an event occurs.
This process function is called from cooperative thread.
Packet conversion and dispaching is implemented in openthread.c
as well as addresses forwarding.
Signed-off-by: Kamil Sroka <kamil.sroka@nordicsemi.no>
OpenThread requires platform definition with standarized API
so we have to add wrappers to make it compatible with Zephyr.
OpenThread is based on autoconf, this requires
more specific CMakeLists.txt which allows to clone specific
commit or point to local copy of openthread.
Signed-off-by: Kamil Sroka <kamil.sroka@nordicsemi.no>
The meaning of this address type is the same as NET_ADDR_MANUAL,
but with a provision that DHCP can override such an address.
It's intended for the usecase when there's a default static
configuration for when DHCP is not available, but DHCP should
override it.
Before going to add another address type, there was an attempt
to repurpose TENTATIVE address state, but it doesn't work as
expected, as indeed, all existing address types/states already
have clearly semantics, and it makes sense to just another
address type to avoid confusion and unexpected behavior.
Fixes: #5696
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The idea is that static config is used unless/until DHCP values
arrive. This allows to have the same network configuration values
for both a case of direct board - workstation connection (where
DHCP is usually not available), and a case where both a board and
workstation connect to a router (which serves DHCP).
The changes in this commit however take care of netmask and gateway
settings, but not about IP address itself. This is addressed in the
next patch.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Actually set Zephyr's default DNS server based on the corresponding
DHCP option received. This makes DHCP-based setup Zephyr complete:
now it's possible to connect Zephyr DHCP-enabled system to a typical
router, and it will fully auto-configure to access Internet.
This initial implementation uses just first DNS server address as
returned in DHCP message, it may need to be extended in the future
based on the need.
Signed-off-by: John Andersen <john.s.andersen@intel.com>
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In some cases, we need to initialize DNS servers from a binary
addresses, e.g. in case of DHCP processing. With existing API,
such addresses would need to be converted to strings, just to
be converted back to struct sockaddr in dns_resolve_init().
This is not efficient, and with a number of addresses quite
cumbersome. So instead, allow to pass DNS server either as
strings, or as struct sockaddr's (or both).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The offset of the IP header in a received packet depends on the L2
header size. For Ethernet this is 14 bytes which puts the u32 IPv4
addresses on a non-u32 byte boundary. This causes chips that don't
support unaligned access (like the Cortex-M0) to fault.
The fixes in this patch are enough to ping the board and run the
http_server sample.
Signed-off-by: Michael Hope <mlhx@google.com>
For some reason, ieee802154_verify_channel had a device parameter
instead of an iface like all the others.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will be up to the user to configure a valid channel, through
net_mgmt, and call net_if_up() in order to get the device up.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Depending on device's band, the upper channel limit can vary a lot in
Sub-Ghz. Thus verifying it directly in L2 before requesting it to the
device.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Sub-Ghz bands have different limit of channels. 10, or more than a
thousand is actually possible. Thus the device needs to expose such
limit to the L2 which is unaware of frequency band logic. L2 will
then allow user to select a proper channel.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This field is set and maintained, but not actually used for anything.
The only purpose for it would be to validate ACK numbers from peer,
but such a validation is now implemented by using send_seq field
directly.
Fixes: #4653
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Case #1: If ACK received and our retransmit (i.e. unacked) queue is
empty, it's error. It's incorrect because TCP requires ACK to set for
every packet of established connection. For example, if we didn't
send anything to peer, but it sends us new data, it will reuse the
older ack number. It doesn't acknowledge anything new on our side,
but it's not an error in any way.
Case #2: If retransmit queue is only partially acknowledged, it's an
error. Consider that we have 2 packets in the queue, with sequence
numbers (inclusive) 100-199 and 200-399. There's nothing wrong if
we receive ACK with number 200 - it just acknowledges first packet,
we can remove and finish processing. Second packet remains in the
queue to be acknowledged later.
Fixes: #5504
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Per RFC 793:
A new acknowledgment (called an "acceptable ack"), is one for which
the inequality below holds:
SND.UNA < SEG.ACK =< SND.NXT
If acknowledgement is received for sequence number which wasn't yet
sent, log an error and ignore it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
As title, we should update the existing observe_node when new attributes
are written from server side. Add the implementation to handle that.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
1. Read notification attributes set by server to setup the
minimum/maximum notification period of a observation request.
2. Reordering to check observe_node duplication first
(bailout earlier)
3. Simplify remove observe_node condition checking
NOTE: attributes are inheritable, priority: res > obj_inst > obj
Reference: LwM2M spec V1_0_1-20170704-A, section 5.1
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Since we've added storing notification attributes written by server.
We can now append these attributes as part of link-format for discover
op.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Implement write-attribute on obj/obj_inst/res according to LwM2M spec
20170704-A, sec 5.1.2. Support pmin/pmax/st/gt/lt parameters on WRITE
operation.
The basic idea is to add sys_slist_t to obj/obj_inst/res structure.
And attach struct lwm2m_attr to the list when attributes are written
from server side (implement lwm2m_write_attr_handler accordingly)
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
The ICMPv4 handler needs to unref the received echo reply packet
because we are returning NET_OK to caller. Similar change was done
for IPv6 earlier.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Robert Chou