Adds extern "C" { } blocks to header files so that they can be
safely used by C++ source files.
Change-Id: Ia4db0c36a5dac5d3de351184a297d2af0df64532
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This patch introduces the QMSI I2C driver which is simply a shim driver
based on I2C driver provided by QMSI BSP.
This initial version supports only I2C_0 controller in 'master' mode.
Due to some issues with qm_i2c_master_irq_transfer API, the driver uses
the polling APIs from QMSI. This means that the current thread doesn't
sleep (i.e. is not scheduled out) while the I2C transfer is carried out.
The qm_i2c_master_irq_transfer() issue is under investigation.
Below follows the missing features which will be addressed by a new
version of this patch or by upcoming patches.
* Block the current thread until the I2C operation has actually
completed.
* Add support for multiple controllers.
* Add support for slave mode.
* Add support for suspend() and resume() APIs.
In order to enable this driver, the following options should be set:
CONFIG_QMSI_DRIVERS=y
CONFIG_QMSI_INSTALL_PATH="/path/to/libqmsi/directory"
CONFIG_I2C=y
CONFIG_I2C_QMSI=y
Finally, due to the lack of proper support for Quark SE in QMSI 1.0.0,
this driver requires QMSI version greater than 1.0.0.
This driver has been tested only with Quark SE based boards.
Change-Id: I369992c7b5fe37f7e0b45be7f19e667ad1fca9ac
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This converts the i2c_quark_se_ss to use the static IRQ API.
Note that, even with separate config functions for each instance of
the driver, it is still saving both RAM and ROM space.
Change-Id: Ieb555ff281b384d87d8e69f6914878bbee0e2ee9
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch moves the config options I2C_STATUS_DELAY, I2C_CLOCK_SPEED
and I2C_DEBUG to the top of the Kconfig file. These options are
independent of the device driver and should be placed together with
option I2C_INIT_PRIORITY which is also independent.
Change-Id: I2297f4c31c0106a0d80fbaa9b4e5be0488b84732
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This enables the driver to process the transmit abort signal
during send.
Change-Id: I3ad1f25669bee214b5e1a04cd858ccb4a8442333
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This actually makes the code to bail out when transmit is aborted
during send operation.
Change-Id: I3dda7ec4a6e15d1483738bb90d63d674a994903d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes to request bytes that will fill the RX FIFO
instead of requesting byte one-by-one.
Change-Id: I87c6577dc5fcc476284cd3ed0039a178a5221d24
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes to request bytes that will fill the RX FIFO
instead of requesting byte one-by-one.
Change-Id: I30696c624c9f828818f6df9f1ee744a5bc515f27
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Rolls the transfer initialization function into the setup function,
as it is logical to have just one function (not to mention there
was duplicate code).
() The setup function returns early if there is any error.
Change-Id: Ie9d3057f2963a0ba5b74ac66e058ff4fee31f099
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Make the i2c_transfer() to transact messages through the I2C bus.
It is useful for I2C storage devices, as now we can send one message
containing the destination byte/block address, then send the data
in another message. There is no need to construct one continuous
data buffer to send both address and data anymore.
The drivers and sample apps have been updated to utilize updated
API when appropriate. For i2c_dw, only master mode has been updated.
Slave mode will be updated once we can adequately test it.
Change-Id: I0a811d60567367817fcc8d15f5454e5c933722e2
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fixes a build issue when CONFIG_I2C_DEBUG is turned on.
Change-Id: I8df72e41d0809f99c9c3855cbfcbc5abc60cbca1
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There are a few bits missing on enabling I2C controller on
quark_d2000_crb. This adds the missing bits.
Change-Id: I05bbe8367a9e69962db573d496f1f9f0167ba597
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Rename class in pci_dev_info struct to allow to use C++ compilers.
Updated drivers to use new struct.
Change-Id: I17b94cb7bc094bccd615c8389a28589bfa90cab8
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
The PCI device information for both i2c ports is missing, resulting in
broken PCI enumeration.
Fix this by adding the missing PCI device information.
Change-Id: I5d1739cc994491c34a2a938166a9e56a082ed32e
Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Ido Yariv <ido@wizery.com>
Use a default priority to avoid Kconfig blocking when priority
is not set in SoC or Board.
Change-Id: I4edda47b955a7ee834f04dc40d0decbd8dee6305
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the common #define for IOAPIC interrupt trigger flags out of
platform board.h and into the driver.
Change-Id: I2d50457a45fae62ff085f7239712d580243253bb
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Now that i2c is fully synchronous on top of an interrupt based
implementation, polling mode can be removed. Applying the API change
into the existing drivers.
Change-Id: I05d2a6089743b6b69f7c9da6312057134578e2f7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The i2c_set_callback() does not check for NULL pointers
in driver's API struct. So create an empty set_callback()
function to avoid runtime exceptions, if it is called.
Change-Id: Iad8fed62228d10d42b8189e76873eb4c2ad12eb3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add a semaphore. Each task or a fiber that initiates
a transmission waits on this semaphore for it to complete.
Change-Id: Ia6cf961397614ead252ebea3949c016056289311
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Removes the 'priority' parameter from the IRQ_CONFIG macro.
This parameter was not used anymore in any architecture.
The priority is handled in the IRQ_CONNECT macro.
The documentation is updated as well.
Change-Id: I24a293c5e41bd729d5e759113e0c4a8a6a61e0dd
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Function irq_connect() needs an extra parameter, so
add it in.
Change-Id: I4c7458e67ae57124228eeb486c8daf3b66a97f8f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The calls have been renamed and some drivers and documentation
are still using the old function name.
Change-Id: Ib7505fca6aadd68e3ea3a22bb445914c3eb6ed7f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This platform if actually a subsystem of the Quark SE SoC and is
not standalone. Use a more descriptive name and remove the architecture
from the platform name.
Change-Id: I16b1ab8dd668441683b07fc4512c219924463441
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Put initialization priorities as device driver Kconfig
parameter.
Initialization priority value for each platform is defined
in the platform Kconfig file.
Drivers and platform code use SYS_DEFINE_DEVICE to add
and initialization function.
Change-Id: I2f4f3c7370dac02408a1b50a0a1bade8b427a282
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Provide the irq flags to IRQ_CONNECT_STATIC
- Provide the actual IRQ for that controller
Change-Id: If660baca7e92065cfdb588a2ae86ff13da0918eb
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This adds the I2C driver for the Sensor Subsystem on Quark SE.
This provides minimal support for the I2C controller, and does
only synchronous transfer at the moment.
Change-Id: I400b8ff3390d4b641bed5b8c617830c4217de3ff
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Changing the ROM struct's interrupt_vector to reflect
what the value is properly referencing.
Change-Id: Ifb284821e82e01123c51a848d694da19e442c1e8
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Flags allow passing IRQ triggering option for x86 architecture.
Each platform defines flags for a particular device and then
device driver uses them when registers the interrupt handler.
The change in API means that device drivers and sample
applications need to use the new API.
IRQ triggering configuration is now handled by device drivers
by using flags passed to interrupt registering API:
IRQ_CONNECT_STATIC() or irq_connect()
Change-Id: Ibc4312ea2b4032a2efc5b913c6389f780a2a11d1
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Somehow through the process of enabling Galileo, we have partially lost
the functionality needed to enable I2C1. Bringing back the I2C
configuration options for I2C1 to the DW IP block.
Change-Id: I296bd9c3d167969df5b2fe17627633f5ec4b1ba4
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The I2C1 device is currently using the older device initialization
method, and thus will not work.
Change-Id: If193f20275262abc3b08edd3a26679ae9ad39d94
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Changes the default IRQ priority level from 0 to 2 for the following
kernel configuration options as priorities 0 and 1 are reserved for the
first 32 IDT entries.
SHARED_IRQ_0_PRI
SHARED_IRQ_1_PRI
I2C_DW_0_INT_PRIORITY
GPIO_DW_0_PRI
GPIO_DW_1_PRI
SPI_INTEL_PORT_0_PRI
SPI_INTEL_PORT_1_PRI
Change-Id: I0fc821c68156eb1e1fe776b2bd4ff5890bba40e8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I7e920e6de8f4b7a726c03c05edea3cbac69eb374
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I2276676142deea21cf8079449ce153f2fb887a8e
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I6da43e41f9c6efee577b70513ec368ae3cce0144
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With ioapic_mkstub now taking a context value we can have a single isr
routine and move away from the isr trampolines we have now
Change-Id: Ibbb0f627ac515b12c0590a71da6a3267c952dd30
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Add a context value to the ioapic and loapic mkstub macros to allow
the developer to specify a context value that will be passed on the
stack to the interrupt service routines.
All the invocations for the loapic_mkstub and ioapic_mkstub macros
have been changed to pass in 0 so there is no functional difference
ATM. This change removes the need for drivers to have trampoline ISR
routines to pass a context vaule to their generic ISR routine.
This is the first step in getting rid of the hack where the driver
needs to look into the __initconfig_* linker objects.
Change-Id: I2c5eaa20d8cb5a42ef445762c426854be32c8452
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
In order to have drivers that are usable cross architecture the
signature for IRQ_CONFIG needs to be the same to avoid #ifdef hell in
the driver code based on architecture.
Update the macro and it usage for existing drivers
Change-Id: I22e142b21d4e984add231d1dbd97020e4823985f
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Naming convention uses the _ not - in the file names. In a recent
commit for I2C this for some reason changed. Making the names now
more consistent with other files.
Change-Id: I1e363c0c09ae0c8b2ac3def3beeaaeafcc01eb74
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Gets rid of the trailing initialization level character from the
name of the device variable generated by the macro, since it serves
no useful purpose. (The linker scripts place the various initialization
sections in ascending order based on the name of the section, so there
is no need to embed the initialization level in the variable name itself.)
Change-Id: I56bb79a513b8f77fb1f3fbaccec14454c2520772
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
With the introduction of generic transfer function, it is no longer
needed to specify read or write functions explicitly in drivers.
All read/write functions can now thus call the generic transfer
function to achieve the same result.
With this change, the transfer function becomes mandatory, and
should always be available.
Change-Id: Ia6fb98e58b84330a56a5d44ed3df9db42c3a5e88
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() For interrupt driven transfer, the driver already has
a generic transfer function, so this simply exposes it
for public consumption.
() The polling write is extended to support generic
transfer.
Change-Id: I657db8a6376282c723728b7a875813d389cf7d27
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Re-organize the steps involved in data transfer, according to
the datasheet's flowchart.
() Extract the common code for transfer initialization and put
it into its own function.
() i2c_write() and i2c_polling_write() are now using the common
data sending function.
Change-Id: Ieb90253ee10ddceb3b5d05b258e7fc6253d18729
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fix previous rebasing errors (before merging) where deleted code
was reintroduced back. This causes the default configuration
in Kconfig to be ignored.
Change-Id: I29b246b1459136521d764127bf02e6d8e5aff30c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If using with shared IRQ, this function will be called by
the shared IRQ driver. So we need to check and bail out
early if the interrupt is not coming from the I2C controller.
Change-Id: I3c3ae3c22aa5cf312de5c22b35765749d6c5929d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Such settings belong to Galileo and thus are set in Galileo Kconfig.
Change-Id: Ib9ec721fcc68e92521f8b7690c2640eeb82b2f4c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Call the callback when relevant:
- When STOP_DET if received
- On error
Change-Id: Id60190c6ac5c0b15a0a6cd3fb30b9cc41f2333e8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
On some platforms (e.g. Galileo), the I2C controller is on PCI bus,
which shares IRQ with other devices (GPIO on Galileo). This patch
adds support for utilizing shared IRQ.
Change-Id: Id4e4714aed37c2893d0ffe9ed1e4edaabb338121
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This implementation will wait to write, and wait for transfer
to complete before returning from the function. Currently has
a default timeout of 100ms to prevent being stuck in the loop
waiting for hardware to be ready.
Change-Id: I0340fc6fed100f1d31c0306c5b0ab09689364f63
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The interrupt selectionss are no longer specific to a particular
controller (e.g. I2C_DW_0), but apply to all controllers on
the platform.
[DL: Extracted these changes into their own patch, instead of
being squashed with others. Also modified the Kconfig
options to move them into proper position.]
Change-Id: Idc7ac9769e947447b868dccf772a95dbb5fc8021
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This adds the Kconfig option to specify default configuration
for the I2C controller during driver initialization.
During boot, the controller needs to be configured before
communication to slave devices can start. After boot,
an app can re-configure the controller if needed.
Change-Id: I7bf252f75a31943ae444e4d914f3a9a1a3f3d91f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There are devices that need are part of the architecture core the need
to be initialized prior to devices that are integrated around a core
to make up a complete SOC. Namely the interrupt controller in the SOC
must be configured in order to allow the integrated IP blocks drivers
to initialize correctly.
Change-Id: I0a91e08f98516a7b7dd402ffc6494a071f1326b2
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
This macro is legacy from an early implementation of the init system
before the pure level was split into early and late phases remove it
now to avoid confusion going forward.
Change-Id: I6720874c840c9e14888fd6f411a8182e7420ca29
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Following the naming convention established, private functions
should be prefixed with an _
Change-Id: Ib6006ba3a928da88b8b8c3324f7d4b833f736270
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Many of the i2c functions continue to exist in a format of
<IP>_<interface> and will now follow the <interface>_<IP>_
naming convention.
Change-Id: Ic7ec879105f5c06f0213f8d771b3811253c49658
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Clearing an interrupt in DesignWare is done by reading the port
not by writing to it. Original problem found by Dmitriy@WR.
Change-Id: I1de052632ec36e2d496c563e81307169e9dabcf4
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The header file was renamed in previous commits, but the #include
referred to a non-existing file. This causes compilation error.
This uses the correct file.
Change-Id: Ibda7dbca82323d99dcff71cbee8f642f6cd611d6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This makes variables readable and consistent with other drivers
we have.
Change-Id: I816f133279497eafd5d5614013c8d224d5909590
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This driver naming is an exception which compared with all other drivers
we have. To keep things consistent the configuration options and variables
are renamed to <type>_<name>.
Change-Id: Ib95aa09630a507848f78d8f2c28706b545eed06d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This was missing an include file, which caused the macro to not
be expanded correctly. Including init.h fixes the issue.
Change-Id: I6b190e0c75828d9b6eb42a84c213dfc174510740
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The code fragment to bind the instances of the I2C driver is not
platform specific but is driver specific.
All the information required to bind a driver instance comes from
CONFIG_ variables. Having the binding code with the driver code
avoids duplicating the code fragments in each platform where the
driver may be used.
Change-Id: I9ea132c9340437ccb292bb8f3fa3d3a2b2a794db
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Only 1 port is available on Quark through the PCI bus.
Change-Id: Ie0e0173686947134d2553dd0fd0230ffa5a1d456
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Since such controller is found on Quark x1000 (Galileo, ...), it will
need to get configured and/or enabled through PCI.
Change-Id: I16d00364edcb17653eaaf073e87b4e5850de7299
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using the OS provided sys-io functions for access to the registers
and lower level devices.
Change-Id: I1a88786189cbed0965f84146ffad9988a3b68a7b
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Initial import of Synopsis DesignWare I2C driver functionality
for the Zephyr Project. This import has been tested for host
master control. While it does contain the code to work as a host
slave, this code has not yet been completely tested and validated.
Change-Id: I3df0214f6e3b6798f7dad4819d09c3ec5998e508
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Adds the necessary changes to Kbuild and Makefiles to enable I2C
driver support to build.
Change-Id: I3113ccbbbbb4e06ef134ca73f509d2755a2abb59
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Peter Mitsis