Commit Graph

5 Commits

Author SHA1 Message Date
Marcus Shawcroft fded21ab45 eth/dw: Move RW objects from device config_info to device driver_data.
Mutable driver state relocated from config_info to driver_info.  This
driver supports PCI enumeration.  We drop code that attempts to update
irq_num based on PCI enumeration because the interrupt found by PCI
enumeration must always be the same as the statically configured IRQ
number.

Change-Id: I5580b0ba95635696a825fe66dbf16259c54d5ba8
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
2016-10-19 12:10:59 +00:00
Juan Manuel Cruz 77e09abdda ethernet: Enables multicast reception for dw driver
Jira: ZEP-471

Change-Id: Id6a3ecbe31c055ab006abe475650c9871460f671
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
2016-09-01 11:04:14 +00:00
Sebastien Griffoul 8237d0f882 eth: Fix spurious interrupt issues
The ethernet driver generates a lot of spurious interrupts.
These spurious interrupts have two sources:

1) The Mac Management Counter (MMC) module generates a lot of interrupts
   (GMI - bit 27 of the status register). Unfortunately the Interrupt
   enable register doesn't allow us to enable/disable it (bit 27 is
   reserved). Therefore the only way to mask this interrupt is to mask
   all the MMC interrupts (register REG_MMC_RX_INTR_MASK,
   REG_MMC_TX_INTR_MASK and REG_MMC_RX_IPC_INTR_MASK). By default
   these interrupts are not masked.

2) The RX interrupt is not correctly acknowledged. According to the
   datasheet, NIS is a sticky bit and must be cleared (by writing 1
   to this bit) each time a corresponding bit, which causes NIS to
   be set, is cleared.

Change-Id: I2033973849d87cddc328c65d0d4ad36b5a0c934e
Signed-off-by: Sebastien Griffoul <sebastien.griffoul@intel.com>
2016-05-26 15:12:25 +00:00
Peter Mitsis a0e4568760 c++: Add extern "C" { } block to header files
Adds extern "C" { } blocks to header files so that they can be
safely used by C++ source files.

Change-Id: Ia4db0c36a5dac5d3de351184a297d2af0df64532
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
2016-02-05 20:25:22 -05:00
Michael LeMay ebba3bf38b eth: dw: Add driver for Synopsys DesignWare Ethernet MAC
This patch adds a driver for a Synopsys DesignWare Ethernet MAC.  The
driver uses interrupts to handle received frames, but it uses a
spinloop when transmitting to wait for the transmit descriptor to
become available.  Transmission is coordinated by a fiber, so this
should not result in the system execution being blocked.  Only a
single descriptor is allocated for each of the transmit and receive
directions to save memory and simplify the code.  Another
simplification is that none of the offload capabilities of the
Ethernet device are used.  The driver currently only supports a single
instance of the Ethernet MAC, which is consistent with the limitation
in the network stack that only a single network device is supported.

Change-Id: I013b3d439a76e8ff91a775516f7035841b040870
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
2016-02-05 20:24:38 -05:00