Assembler files were not migrated with the new <zephyr/...> prefix.
Note that the conversion has been scripted, refer to #45388 for more
details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all arch code to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
MDB debugger may modify debug_select and debug_mask registers
on start, so we can't rely on debug_select reset value.
Let's set correct value on primary CPU without reading initial
value from debug_select.
Internal ID: P10019563-50516
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Call into z_thread_usage_stop() before ISR entry to avoid including
interrupt handling totals in thread usage stats.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add support of ARC mpu v6
* minimal region size down to 32 bytes
* maximal region number up to 32
* not support uncacheable region and volatile uncached region
* clean up mpu code for better readablity
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
Rewrite ARC SMP code with ASM-compat macros so it can be
used for ARCv3 64 bit.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The ARConnect Inter-core Debug Unit (ICD) provides additional
debug assist features in multi-core scenarios. It's useful to halt
other cores when one core is halted.
Before we program ICD in master core(core 0) initial stage, add
all cores to mask. so we need to make sure other slave cores have
launched and in running mode before we enable ICD in master core.
If we launch master core first, then launch slave cores by master
core conditionally, in this scenario, it's not OK.
Let's update arc connect debug (ARConnect ICD) select mask
when new slave core come online by slave core self, instead of
use hardcoded select mask.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Most arch's CMakeLists.txt contain rules to add compiler and linker
flags for coverage if CONFIG_COVERAGE is enabled, but 4 of them were
missing this.
Instead, set the coverage flags in arch/common/CMakeLists.txt which
affects all archs.
Signed-off-by: Jeremy Bettis <jbettis@chromium.org>
SECTION_FUNC allows only one function to reside in a sub-section
SECTION_SUBSEC_FUNC allows multiple functions to reside in a sub-section
we should use SECTION_SUBSEC_FUNC for _reset and _start
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
For ARCv3 the register is fixed to r30, so we don't need to
configure it at compile-time.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
ARCv3 64 bit processors doesn't have Zero Delay Loop
(also named Zero Overhead Loop, ZOL) mechanism. Add kconfig
option to remove ZOL register save/restore so the code
can be build for both ARCv2 and ARCv3.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
ARCv2 32 bit and ARCv3 64 bit share the same vector table
structure but with different vector entry size (32 and 64 bit),
so we can easily make vector table bit agnostic.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Make variables where we store CPU registers values and
memory addresses bit agnostic.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Mark the places where we intentionally use st instead of STR for
code common for ARCv2 and ARCv3.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
When we accessing bloated structure member we can exceed u9 operand
in store instruction. So we can use _st32_huge_offset macro instead
for 32 bit accesses
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Rewrite ARC assembler code with asm-compat macroses, so the same
code can be used for both ARCv2 (GNU and MWDT assemblers) and
ARCv3 (GNU assembler)
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Remove the config BOOT_TIME_MEASUREMENT and corresponding #ifdef'd code
throughout (kernel/init.c, idle.c, core/common.S , reset.S, ... ) which
hold the extern hooks for z_timestamp_main and z_timestamp_idle in the
removed boot_time test suite.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This patch introduce new API to enable FPU of thread. This is pair of
existed k_float_disable() API. And also add empty arch_float_enable()
into each architectures that have arch_float_disable(). The arc and
riscv already implemented arch_float_enable() so I do not touch
these implementations.
Motivation: Current Zephyr implementation does not allow to use FPU
on main and other system threads like as work queue. Users need to
create an other thread with K_FP_REGS for floating point programs.
Users can use FPU more easily if they can enable FPU on running
threads.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
STATUS32.DZ(bit 13) is the EV_DivZero exception enable bit, and it's
not enabled by default. we need to set it explicitly to enable divide
zero exception on early boot and each thread's setup.
The DZ bit is ignored on write and read as zero when there is no
hardware division configured. So we can simply set DZ bit even if
there is no hardware division configured.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
As of today during the Zephyr start we
- invalidate I$
- disable I$
- enable I$
Given that we don't need to have I$ disabled during any
initialization period and ARC processors have caches enabled
after reset the I$ disabling/enabling is excessive, so we can
drop it.
By that we also aligh the I$ initialization on ARC with other
projects like U-boot and Linux kernel.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
ARC mpu version used a wrong number 3, could cause conflict in future.
This commit fix this issue to version number 4.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
Remove duplication in the code by moving macro LOCKED() to the correct
kernel_internal.h header.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Both _IRQ_VECTOR_TABLE_SECTION_NAME and _SW_ISR_TABLE_SECTION_NAME
are defined with asterisk at the end in an attempt to include
all related symbols in the linker script. However, these two
macros are also being used in the source code to specify
the destination sections for variables. Asterisks in the name
results in older GCC (4.x) complaining about those asterisks.
So create new macros for use in linker script, and keep
the names asterisk free.
Fixes#29936
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The new APIs are not only dealing with cache flushing. Rename the
Kconfig symbol to CACHE_MANAGEMENT to better reflect this change.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
accessing the stack below guard_end is always a bug. some
instrustions (like enter_s {r13-r26, fp, blink}) push a collection
of registers on to the stack. In this situation, the fault_addr will
less than guard_end, but sp will greater than guard_end.
|------stack base-------| <--- high address
| |
| | <--- sp
|------stack top--------|
|------guard_end--------|
| | <--- fault_addr
| |
|------guard_start------| <--- low address
So we need to remove the SP check. Trade-off here is if we prefer
'false' classifications of MPU stack guard area accesses as stack
error or as general mpu error. The faults get caught anyway, this is
just about classification: don't see a strong need for the extra check
to only report stack pointer accesses to guard area as stack error,
instead of all accesses.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most of kernel files where declaring os module without providing
log level. Because of that default log level was used instead of
CONFIG_KERNEL_LOG_LEVEL.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
According to the PRMs of both ARC EM & ARC HS families on entry
to Fast IRQ handler ARC hardware saves PC (Program Counter) value
of where processor was right before jumping to the IRQ handler into
2 registers: ILINK & ERET.
But it turned out in case of ARC HS (at least in configuration with
Fast IRQs & 1 register bank) only ILINK was populated with the
previous PC, while in Zephyr we relied on what we read out of ERET.
That lead to funny issues when CPU returned from IRQ handling
to some unexpected location.
And now with that precious knowledge we're switching to return
address recovery from ILINK so that with both families of ARC
processors (EM & HS) we may get reliably good results.
The wrapper is few cycles shorter/faster as well, as we may shave off
another extra instruction for transferring ERET value from its AUX reg
to a scratch core register to be later stored in the memory.
+----+---------------+---------------+--------------+
| | FIRQ | RIRQ | RIRQ(Secure) |
+----+---------------+---------------+--------------+
| HS | ILINK=PC | ILINK=PC | NULL |
+----+---------------+---------------+--------------+
| EM | ILINK=ERET=PC | ILINK=ERET=PC | ILINK=PC |
+----+---------------+---------------+--------------+
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Adds a new CONFIG_MPU which is set if an MPU is enabled. This
is a menuconfig will some MPU-specific options moved
under it.
MEMORY_PROTECTION and SRAM_REGION_PERMISSIONS have been merged.
This configuration depends on an MMU or MPU. The protection
test is updated accordingly.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Since the tracing of thread being switched in/out has the same
instrumentation points, we can roll the tracing function calls
into the one for thread stats gathering functions.
This avoids duplicating code to call another function.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
align kconfig option CONFIG_ARC_CUSTOM_INIT to
CONFIG_INIT_ARCH_HW_AT_BOOT. Remove unused CONFIG_ARC_CUSTOM_INIT in
kconfig.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
The Inter-core Debug Unit provides additional debug assist features in
multi-core scenarios.This commit allows ARConnect to conditionally
halt cores during debugging.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
There is a register misuse in leaving tickless idle code, which would
destroy exception/interrupt status. This commit fix this issue.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
In old version nSIM, when cpu is sleeping, no response to
inter-processor interrupt although it's pending and interrupts
are enabled(SNPS JIRA issue P10019563-41294). Now this has
been fixed in nSIM version (2020.09), so we can safely remove it.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Gerard Marull-Paretas