Now we define PROPERTY_OUTPUT_FORMAT (which is used for
binutils) only for ARCv3 32 bit. Let's define it for all
ARC elf formats instead of relying on default values.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Provide required compiler/assembler options for building with mwdt
toolchain for ARCv3 64 bit.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Assembler files were not migrated with the new <zephyr/...> prefix.
Note that the conversion has been scripted, refer to #45388 for more
details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all arch code to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
MDB debugger may modify debug_select and debug_mask registers
on start, so we can't rely on debug_select reset value.
Let's set correct value on primary CPU without reading initial
value from debug_select.
Internal ID: P10019563-50516
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
ARC_HAS_ACCL_REGS should set to y to protect ACCL and ACCH registers
during irq. These registers could be used as GPRs by compilers and
therefore need store/restore during irq.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
Call into z_thread_usage_stop() before ISR entry to avoid including
interrupt handling totals in thread usage stats.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Don't allow to enable multiple register banks / fast
interrupts if we have only one interrupt priority level.
NOTE: we duplicate some checks by adding dependencies to ARC
Kconfig and adding build-time checks in C code. We do it
intentionally as for some reason we can violate dependencies
in architecture-level Kconfig by adding incorrect default in
SoC-level Kconfig. Such violation happens without any
warnings / errors from the Kconfig.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
__cxa_atexit implementation provided by MWDT startup code calls
malloc which isn't supported right now. As we don't support
calling static destructors in Zephyr let's provide our own
__cxa_atexit stub and get rid of MWDT startup libs
entirely.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Add support of ARC mpu v6
* minimal region size down to 32 bytes
* maximal region number up to 32
* not support uncacheable region and volatile uncached region
* clean up mpu code for better readablity
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
Metaware assembler doesn't accept '@' symbol in the beginning
of symbol name like GNU does.
Drop excessive '@' for _curr_cpu symbol.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Increase default stacks sizes for 64bit platforms where it is
required.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Rewrite ARC SMP code with ASM-compat macros so it can be
used for ARCv3 64 bit.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Accumulator registers (ACCL, ACCH) are used on HS CPUs not only
in case of FPU usage but also in case of MPY usage. We enable MPY
for all ARCv2 HS in commit
18a24c3f6 ARC: gcc-m-cpu: use -mcpu=archs as a default for ARCv2 HS
but we didn't enable accumulator registers management.
Let's enable accumulator registers save/restore on all ARCv2 HS CPUs
by default.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The ARConnect Inter-core Debug Unit (ICD) provides additional
debug assist features in multi-core scenarios. It's useful to halt
other cores when one core is halted.
Before we program ICD in master core(core 0) initial stage, add
all cores to mask. so we need to make sure other slave cores have
launched and in running mode before we enable ICD in master core.
If we launch master core first, then launch slave cores by master
core conditionally, in this scenario, it's not OK.
Let's update arc connect debug (ARConnect ICD) select mask
when new slave core come online by slave core self, instead of
use hardcoded select mask.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Most arch's CMakeLists.txt contain rules to add compiler and linker
flags for coverage if CONFIG_COVERAGE is enabled, but 4 of them were
missing this.
Instead, set the coverage flags in arch/common/CMakeLists.txt which
affects all archs.
Signed-off-by: Jeremy Bettis <jbettis@chromium.org>
SECTION_FUNC allows only one function to reside in a sub-section
SECTION_SUBSEC_FUNC allows multiple functions to reside in a sub-section
we should use SECTION_SUBSEC_FUNC for _reset and _start
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
ATOMIC_OPERATIONS_BUILTIN issue (internal jira number: P10019563-43273)
has been fixed in new relasese MWDT 2021.03. We can use builtin atomic.
this commit reverts PR: #28528
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
For ARCv3 the register is fixed to r30, so we don't need to
configure it at compile-time.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Increase stacks required for ARCv3 64-bit CI to pass.
The CMSIS stacks are for programs in samples/portability
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
ARCv3 64 bit processors doesn't have Zero Delay Loop
(also named Zero Overhead Loop, ZOL) mechanism. Add kconfig
option to remove ZOL register save/restore so the code
can be build for both ARCv2 and ARCv3.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
ARCv2 32 bit and ARCv3 64 bit share the same vector table
structure but with different vector entry size (32 and 64 bit),
so we can easily make vector table bit agnostic.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Make variables where we store CPU registers values and
memory addresses bit agnostic.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Mark the places where we intentionally use st instead of STR for
code common for ARCv2 and ARCv3.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
When we accessing bloated structure member we can exceed u9 operand
in store instruction. So we can use _st32_huge_offset macro instead
for 32 bit accesses
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Rewrite ARC assembler code with asm-compat macroses, so the same
code can be used for both ARCv2 (GNU and MWDT assemblers) and
ARCv3 (GNU assembler)
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Reuse ARCv2 headers [where it is possible] for ARCv3.
In this commit we simply allow to use them for ARCv3, we'll
move it to proper folder and rename them [where it is required]
in the upcoming cleanup patch.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Do basic preparations for building code for ARCv3 HS6x
* add ISA_ARCV3 and CPU_HS6X config options
* add off_t type support for __ARC64__
* use elf64-littlearc format for linking
* use arc64 mcpu for CPU_HS6X
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Remove the config BOOT_TIME_MEASUREMENT and corresponding #ifdef'd code
throughout (kernel/init.c, idle.c, core/common.S , reset.S, ... ) which
hold the extern hooks for z_timestamp_main and z_timestamp_idle in the
removed boot_time test suite.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
As of today we use second register bank only if fast interrupts are
enabled. So don't show the 'number of register bank' configuration
option if fast interrupts are disabled to avoid user confusion.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This patch introduce new API to enable FPU of thread. This is pair of
existed k_float_disable() API. And also add empty arch_float_enable()
into each architectures that have arch_float_disable(). The arc and
riscv already implemented arch_float_enable() so I do not touch
these implementations.
Motivation: Current Zephyr implementation does not allow to use FPU
on main and other system threads like as work queue. Users need to
create an other thread with K_FP_REGS for floating point programs.
Users can use FPU more easily if they can enable FPU on running
threads.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
* Rename CPU_ARCV2 to ISA_ARCV2. That helps to avoid conflict between
CPU families naming and ISAs naming and aligns this options
with other ARC OSS projects.
* Generalize ARCV2 check to ARC check where it is required.
NOTE: we add ISA_ARCV2 option in a choice list as a preparation
for ISA_ARCV3 addition.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Don't allow user to choose CPU_ARCEM / CPU_ARCHS options
but select them when exact CPU type (i.e. EM4 / EM6 / HS3X/ etc)
is chosen.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
STATUS32.DZ(bit 13) is the EV_DivZero exception enable bit, and it's
not enabled by default. we need to set it explicitly to enable divide
zero exception on early boot and each thread's setup.
The DZ bit is ignored on write and read as zero when there is no
hardware division configured. So we can simply set DZ bit even if
there is no hardware division configured.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
As of today during the Zephyr start we
- invalidate I$
- disable I$
- enable I$
Given that we don't need to have I$ disabled during any
initialization period and ARC processors have caches enabled
after reset the I$ disabling/enabling is excessive, so we can
drop it.
By that we also aligh the I$ initialization on ARC with other
projects like U-boot and Linux kernel.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
As we have removed MPU_STACK_GUARD for ARC_MPU_VER 2, we also
need to remove ARCH_HAS_STACK_PROTECTION for boards with
ARC_MPU_VER 2 and no hardware stack checking, relative commit:
commit(arch: arc: remove MPU_STACK_GUARD for ARC_MPU_VER 2)
in pull request #24021
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
ARC mpu version used a wrong number 3, could cause conflict in future.
This commit fix this issue to version number 4.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
Remove duplication in the code by moving macro LOCKED() to the correct
kernel_internal.h header.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Evgeniy Paltsev