This commit adds driver support for ADC1 on all 8 supported series of
stm32 with resolution and conversion time selection and calibration.
Currently DMA is not supported for all series, and without it, zephyr
won't be able to catch up ADC's end of conversion interrupt, so this
version of the driver supports one channel conversion only. Users want
multi-channel conversion should use multiple sequences in their app
code.
This driver uses LL lib rather than HAL because the current HAL lib for
ADC will call HAL_DMA_* functions rather than using zephyr's common DMA
interface, so that way the driver will break the consistency of the
code.
This driver has been tested on multiple nucleo boards including
NUCLEO_F091RC/F103RB/F207ZG/F302R8/F401RE/F746ZG/L073RZ/L476RG and all
passed the test cases in tests/drivers/adc/adc_api. If the external ADC
line is floating, it may fail the tests since ADC may get 0V and the
test cases think 0 is failing. Connect it to any voltage source between
0-3.3V will help passing the test cases.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Setting callbacks is forbidden from user mode.
Some heavier code changes will be needed to support
adc_read_async(), this patch just exposes the config
and read functions for now.
Test case updated to run partially in user mode.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Since commit 0906a51dac, the driver
fails the test: tests/drivers/adc/adc_api. Some of the workflow
turns out to be incorrect (e.g. not doing dummy conversion after
getting out of deep power down, and not clearing interrupt status
bits). So take some time to overhaul the driver. Also rename
the driver to adc_intel_quark_se_c1000_ss because the inner
working of this driver is tied to Quark SE C1000 SoC.
Fixes: #12632
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Nothing builds this driver and the driver hasn't been updated to the new
ADC api so it does not compile. Remove it sinces its effectively dead
code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds translation layers to make nrfx drivers for the nRF
ADC (nRF51 series) and SAADC (nRF52 series) peripherals accessible via
the Zephyr's API. The SAADC peripheral is accessed using nrfx HAL only
as it turns out that usage of the nrfx driver in this case would be
inconvenient and would unnecessarily complicate the shim.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit replaces the API for ADC drivers with a reworked one.
As requested in the issue #3980, the adc_enable/adc_disable functions
are removed. Additionaly, some new features are introduced, like:
- asynchronous calls
- configuration of channels
- multi-channel sampling
Common parts of code that are supposed to appear in each implementation
of the driver (like locking, synchronization, triggering of consecutive
samplings) are provided in the "adc_context.h" file to keep consistency
with the SPI driver. Syscalls are no longer present in the API because
the functions starting read requests cannot use them, since they can be
provided with a callback that is executed in the ISR context, and there
is no point in supporting syscalls only for the channels configuration.
"adc_api" test is updated and extended with additional test cases,
with intention to show how the API is supposed to be used.
"adc_simple" test is removed as it does not seem to add much value.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Normally a syscall would check the current privilege level and then
decide to go to _impl_<syscall> directly or go through a
_handler_<syscall>.
__ZEPHYR_SUPERVISOR__ is a compiler optimization flag which will
make all the system calls from the driver files directly link
to the _impl_<syscall>. Thereby reducing the overhead of checking the
privileges.
In the previous implementation all the source files would be compiled
by zephyr_source() rule. This means that zephyr_* is a catchall CMake
library for source files that can be built purely with the include
paths, defines, and other compiler flags that all zephyr source
files uses. This states that adding one extra compiler flag for only
one complete directory would fail.
This limitation can be overcome by using zephyr_libray* APIs. This
creates a library for the required directories and it also supports
directory level properties.
Hence we use zephyr_library* to create a new library with
macro _ZEPHYR_SUPERVISOR_ for the optimization.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Charles E. Youse