Removing many of the typedefs that are only used once to lessen the
checkpatch warning about creating new typedefs. A handful have been
behind as they would require a more invasive change to the code. It
has yet to be determined if this is a worthwhile endavour.
Change-Id: Ibeb29e0a1d37e8121218fccf0d986cbebd226e85
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Provide a preconfigured base address for MMIO and a preconfigured IRQ
pin identifier for the first PCI Ethernet MAC in the Intel Quark X1000
SoC.
Change-Id: I1b527df6c3b1b65da9f0233464e54157029f04f5
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
Change-Id: I099773701448b09bc3fa0607552fadec39e24407
Work-by: Jeff Blais <jeffrey.blais@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Signed-off-by: Jeff Blais <jblais@windriver.com>
If PWM had been configured by some other application after the last
power cycle, it would appear to work fine. However, an application using
PWM loaded right after a power cycle would not work, since the configure
call was missing during boot.
Change-Id: I389ca2122e1a4a7ea6d298efb327438761336d75
Work-by: Mike Hirst <michael.hirst@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
galileo.c currently calls itself system.c in a comment. It lies.
ia32.c currently calls itself system.c in a comment. Don't believe it.
ia32_pci.c currently calls itself system.c in a comment. It lies.
Change-Id: Icdba074ff2e2e478529bc5757c90b5adbc9dcb8a
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
GPIO7 and SPI1_MISO share the same muxer and SPI1_MISO is an input pin.
Change-Id: Ib55e03680fadc3f8ce2725fad6761b3551134081
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
SPI port 1 needs the pinmuxer to be initialized first. Or then, all
modifications required from the CS GPIO logic won't apply.
Change-Id: Ibe4b2d4096065a9add23373075090d5e8a014650
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
As for the SPI port 0, SPI port 1 needs a GPIO pin to emulate the CS.
Change-Id: I00911cd25c3fa0ae17a02ee6f43cbea7f4fbcca2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ioapic_irq_set() needs a vector number: all calls to it now use the
_IRQ_TO_INTERRUPT_VECTOR() macro as expected.
The previous change by which interrupt priorities are now honoured
correctly when connecting ISRs to IRQs statically also changed the way
the interrupt vectors are assigned.
Instead of computing them like this:
interrupt vector ID = IRQ + INT_VEC_IRQ0
They are now determined by a macro:
interrupt vector ID = _IRQ_TO_INTERRUPT_VECTOR(irq)
Change-Id: Icc4576ac9bc6891c8662bcc17a543333eb8745e0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the default IRQ priority level from 0 to 2 for the following
kernel configuration options as priorities 0 and 1 are reserved for the
first 32 IDT entries.
SHARED_IRQ_0_PRI
SHARED_IRQ_1_PRI
I2C_DW_0_INT_PRIORITY
GPIO_DW_0_PRI
GPIO_DW_1_PRI
SPI_INTEL_PORT_0_PRI
SPI_INTEL_PORT_1_PRI
Change-Id: I0fc821c68156eb1e1fe776b2bd4ff5890bba40e8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
CONSOLE_HANDLER depends on UART_CONSOLE so this define is not needed.
Also mark parameter unused.
Change-Id: I58b52955a22de3fb3216454a1d802eef63c9f845
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Configure IOAPIC for Bluetooth interrupts connected to UART.
Change-Id: Iad58f52e95c05245d38dd0f4cb10494b53bad8e0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Configure IOAPIC for Bluetooth interrupts connected to UART.
Change-Id: Ia93f71a8e8435c523dd8ee232f9ce4cf9266b978
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Configure IOAPIC for Bluetooth interrupts connected to UART.
Change-Id: Ib9c208a1d396bb6f51531e970d515e42ff416e6c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Change-Id: I6da43e41f9c6efee577b70513ec368ae3cce0144
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This implements the get function for the Galileo pinmux
driver. Also modify the set function so that the get
function would work correctly.
Change-Id: I463b01a903389a9c640bb1354ce92b9c0e37030f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If console handler is defined uart console should also be defined.
Change-Id: I3efcc6c837f8f1621340f7f13bf0603d7dc42fb2
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Only driver specific public headers should be found in include/drivers.
All generic API are found in include/ directory.
Change-Id: Ic50931987bb9460fd4a3843abc6f5de107faf045
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Gets rid of obsolete #ifdefs, since the name of a UART device's
associated variable is now constant regardless of when it is
initialized.
Change-Id: Ic6b5ce7777f067fb57aee33899a644c63040d41f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of the trailing initialization level character from the
name of the device variable generated by the macro, since it serves
no useful purpose. (The linker scripts place the various initialization
sections in ascending order based on the name of the section, so there
is no need to embed the initialization level in the variable name itself.)
Change-Id: I56bb79a513b8f77fb1f3fbaccec14454c2520772
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Setting up the right SPI port, its configuration and max frequency.
Also, setting NANO_TIMEOUTS by default as it is required for delayed
operation inside ADC's driver.
Change-Id: I63b2b872ff858f1d80065a94ba3e2f303d279a67
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Taking the opportunity to set simpler driver names for port 0 and 1.
Change-Id: I994bc43daaf6bc43b0dad564a72577c874f72d2d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
*_PORT_1_* not *_PORT_0_* obviously.
Change-Id: Idefad40c25b4ad54d9558355daab224bc634c2e7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Galileo SPI interrupt is of type level low, thus setting it to this
value in Galileo's defconfig and removing useless entry in Kconfig.
Change-Id: I90bcc74be1a957bf59912d6f8c2234cfa4fe2329
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Needed to get simple uart driver working in qemu with
SLIP networking or qemu<->qemu network testing. Because
this is only needed in qemu the patch only touches ia32
platform.
This can conflict with Bluetooth in x86 and qemu so caveat emptor.
Change-Id: Iba20543f968c8fd37ee36747d9aa1ad3f782057d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Kconfig can't set the default for a choice, so it has to be done
using select.
Change-Id: I1d952eb48a7bcda79b4f8ff475110c7430be7b4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
PCI information and integration of designware's gpio controller
with shared irq.
Change-Id: I80c7fed35ff328e06d87ebad3e2f68fdd6f5672e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since the console is not yet setup, there will be nothing to be printed
out. Also, it adds a dedicated init function which is only useful for
it. Instead, debugging PCI enumeration can be simply done in application
side.
Change-Id: Ia8384caa97d43f0bc4300ecf36bc11d1b8bd5581
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As long as PCI_ENUMERATION does not work for all IP block, let's provide
pre-configured base address registers for ns16550 on Galileo.
Once PCI_ENUMERATION will be fixed, such pre-configured settings will
not be used at runtime.
Change-Id: I514b3a5759e3af04132c7801f37033108a7b279b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Providing the right settings through Galileo's Kconfig.
Change-Id: Ia5339eb90cb98d7dde3be0493bcfd9a6b6db60ed
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add Kconfig option to specify how interrupt is triggered for SPI.
Also enabling such support for Galileo platform.
Change-Id: Id3112d100089197940f826b827493174d0f22669
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Perform configuration of the shared IRQ has to be done earlier,
as the config code masks the interrupt by default. If configuration
is done after shared_irq_enable() is called, the interrupt is
effectively masked. So move the init level a bit earlier.
Change-Id: Ic7f059628e3cf122d323513e171c7d1a09e5d4a6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The IOAPIC driver resets all interrupt vectors, so any configuration
has to be done after that. Move the HPET IRQ config to later init
level so we are sure that the configuration is being done.
Change-Id: Id169461cce15252f7fb77e9c07961300233f3344
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With the typos, IRQ triggering conditions are not set correctly.
Change-Id: I0698ce69c3368411a2f91a32ac27608e9f1de252
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This expands the Galileo pinmux driver to configure the GPIOs
on the DesignWare IP block, and the core/resume wells on
the legacy bridge.
Change-Id: Ia1df4b6fd3b104f08563fe9eab93f01efbb53b66
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enables all the GPIO blocks, and pin muxes on Galileo Gen2
board. GPIO and I2C are now sharing one interrupt line so both
can now get interrupt driven events.
Change-Id: I31a4823abba84539ce5d1cc84e85b7dc335cf831
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The DesignWare GPIO and I2C are PCI devices which share the same
IRQ line. This patch enables the shared IRQ support for I2C. GPIO
support is to be followed.
This also enables I2C for nanokernel on Galileo.
Change-Id: I66681d71899914bdcb35c4af649d077ffb8d7970
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
On some platforms (e.g. Galileo), the I2C controller is on PCI bus,
which shares IRQ with other devices (GPIO on Galileo). This patch
adds support for utilizing shared IRQ.
Change-Id: Id4e4714aed37c2893d0ffe9ed1e4edaabb338121
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
On some platforms (e.g. Galileo), the GPIO controller is on PCI bus,
which shares IRQ with other devices (I2C on Galileo). This patch
adds support for utilizing shared IRQ.
Change-Id: I4b44bae15356e4710d54f0343fed1bd27f35e484
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the code to setup the IO-APIC for shared IRQ.
The code to enable shared IRQ with GPIO and I2C will follow.
Change-Id: I6e7de69f83bf7f1dd0da0571dbcb417beb2c232b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The interrupt selectionss are no longer specific to a particular
controller (e.g. I2C_DW_0), but apply to all controllers on
the platform.
[DL: Extracted these changes into their own patch, instead of
being squashed with others. Also modified the Kconfig
options to move them into proper position.]
Change-Id: Idc7ac9769e947447b868dccf772a95dbb5fc8021
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This adds the default config option to enable the I2C controller,
for both nanokernel and microkernel.
Note that choices in Kconfig cannot have default values in Kconfig,
so it has to be done in defconfig instead.
Change-Id: I2ac0c880629db68e5b9a6bf61e49939ab7418a89
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Dan Kalowsky