Streamlines the prompts and help text for the floating point
configuration options to make them easier to understand. Also
fixes a help text error that said fibers using the floating point
registers needed to provide additional stack space, which is
incorrect.
Change-Id: Ib6fc13460999ec7f737118728a363b4e10d23fcf
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Begining of interrupt (BOI) is only supported on systems with a 8259
interrupt controller all modern x86 systems use APIC interrupt
controller.
Change-Id: Ife2b3b1971bbebeda597bfa1f96005f79cd7e959
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
This avoids the case where the system has multiple threads using
floating point and the threads were not properly configured to use
floating point. The misconfigured threads will only take the fault on
first use of a floating point instruction.
Change-Id: I2be9f9f145bc4e7659e07154021ccc237774897b
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Allow the user to see the configure option without relying on
FP_SHARING being set.
Change-Id: I7e802c18a1c1087f7672925b18ae32dcc20787da
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The default for x86 floating point support in Zephyr is *no* this
option is redundant and more that a little confusing.
Change-Id: I41fad33467321c483a4df028230ecbb28b4486f9
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
SSE instructions are controlled by the FLOAT and SSE config variables
this option is redundant
Change-Id: Iab43d21315655a00daeac24994ee29a8e1c70207
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The projects depend on the options enabled by ENHANCED_SECURITY select
required options explicitly. Forcing selection based on
ENHANCED_SECURITY is redundant.
Change-Id: I4473996355e67c99be91413b55d7c6685d9263b2
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Those ports uses different instructions to get accessed: in/out
instructions. It differs in many ways with memory access, and it's much
slower. It's unset by default, but some arch exposing legacy UART ports
might need it.
Change-Id: I06f2a7c7812e720863957bd20d5c2b8b02c10734
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Make config variable name match the function. The PIC is never turned
on in the zephyr code so there is nothing to shut off.
Change-Id: I1627e5a35cc37ef7959f36758c1e1aec03e22782
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
This allows the serial driver to be excluded from the build.
Change-Id: Ibd65cea07e753de0d452879bfdac8f3a421db5e7
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Removes the non-PIC disabling PIC code as the PIC is not a supported interrupt
controller. The PIC disabling code remains as it is needed to prevent the
generation of spurious interrupts from the PIC (see CONFIG_SHUTOFF_PIC).
Change-Id: Ic59aa17ab96f34685a5d7b5f24cab391de47edca
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames the menu to "Processor Capabilities" as it is both more concise and
it gives a more "consistent feel" to the menu names (referring to the platform
equivalent "Platform Capabilities".)
Change-Id: I1f835e11e382f811720c17e194b4bf410ef74d31
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Reduces redundancy in the x86 Kconfig menus.
Change-Id: I90ff7d6aedda2aa02528b6821eeaf7eb6bea321c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The Kconfig option PROT_MODE_SWITCH_PROMPT was being used to conditionally
display the "Boot Sequence Options" Kconfig menu. It is simpler to include
both PROT_MODE_SWITCH and its dependent BOOT_A20_ENABLE in the parent menu.
However, doing so necessitates that the name of the parent menu be changed
from "Bootloader Options" to "Boot Options".
Change-Id: I9b9a074a0d4ec5209f5349b42178409c73875b00
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the order of the floating point options so that the SSE Kconfig options
are not interspersed with the floating point options.
Change-Id: I8390b5049f95b3088e7abf48bf492a544e7f5f50
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
It makes more sense to have the x86 Kconfig options CPU_FLOAT_UNSUPPORTED
and CPU_SSE_UNSUPPORTED to be selected by the CPU than have those options
dependent upon the selected CPU.
Change-Id: I862baabee6a81cc79206c37a50b8594354a40403
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
There is no need for any x86 Kconfig to have a dependency upon the following
Kconfig options as they are always true when building for ARCH=x86.
X86_32
ISA_IA32
ARCH="x86"
Change-Id: I810e9712589199871953f043e8be746ab03230f8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Uses tabs instead of spaces for consistency.
Change-Id: Ic85b710dc7f667f9b28b97839f020921afe13f3f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The Kconfig option HARDWARE_BP_SUPPORTED is not used.
Change-Id: Ifed886f733e8125ef1c45926e46e31ff48d06316
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The top-level menus "x86 Core Options" and "Bus Options (PCI etc.)" are now
sub-menus to the the top-level menu "General Platform Configurations".
Also, the "Board Capabilities" sub-menu has been hoisted out of the
"x86 Core Options" menu and placed as a renamed sub-menu
(Platform Capabilities) to the top-level "General Platform Configurations"
menu.
This helps to create a more logical flow when using "make menuconfig".
Change-Id: I3a837b039eb735ec4073a1721f00753705fba020
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Combines the following Kconfig options to create PLATFORM_IA32:
PLATFORM_GENERIC_PC
PLATFORM_PCMINUTEIA
PLATFORM_ATOM_N28XX
The new name aligns with the 'arch/x86/platforms/ia32' platform directory.
Change-Id: I4474cb43040f888d5164382184c27bbb38527440
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
1. The new name aligns with the 'arch/x86/platforms/ia32_pci' platform
directory.
2. A shorter prompt works better with menuconfig.
3. Removes IOAPIC selection as HPET_TIMER selection makes it implicit.
4. Removes LINK_AUX_COMPILER_LIBS selection as it does not exist.
5. Removes CPU_MINUTEIA selection to permit CPU_ATOM as a valid choice.
Change-Id: I55694d2594a103f4f5ca233c279df0556ff1327f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This commit removes the ADVANCED_IDLE and ADV_IDLE_STACK_SIZE
Kconfig symbols.
This Kconfig symbols were defined in arch/x86/Kconfig and
kernel/microkernel/Kconfig as well.
Change-Id: I17cc28cdf6f07c8a85acad7318b2b4ce6a06f4bc
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
In order to work reliably on QEMU and not depend on the
host CPU frequency change basic_atom configuration to use HPET.
Change-Id: I1253a0224bcbff4a7d54406b089c29b5ace32080
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Changes the the names of the x86 platforms so that they are more generic.
generic_pc -> ia32
quark -> ia32_pci
NOTE: it is expected that the two platforms will eventually be merged into one.
one. At present, the two platforms support different hardware. For example,
the ia32 supports bluetooth whereas the ia32_pci does not, and the ia32_pci
supports both PCI and HPET whereas the ia32 does not.
Change-Id: I8a980aaef55be8c59f7d19ddeb7fafbf11253408
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes CONFIG_CPU_PENTIUM4 and CONFIG_PLATFORM_PENTIUM4 as Zephyr does not
support the Pentium4.
Change-Id: Ieb1970894eda184f4c33d03e3563fb08f861ec6c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates Kconfig option names as part of transforming BSPs to platforms.
Change-Id: If397bcac8b058e5700e82c3cabbfe64588316d1d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
More bootloader options moved to 1 single menu.
Change-Id: I6908de8e26b4a15617ad5aa738c9dc2a928ad6a4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The options were seen in the top level menuconfig menu, gather
them under a the Bus menu. This includes the PCI option itself
and any related options.
Change-Id: Ib09e2ed0c35dca5ad1c2e086d0f4a479a847291f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make device drivers use static interrupt registration procedure.
DYNAMIC_INT_STUBS configuration parameter was used only by device
drivers to switch between static and dynamic interrupt registration
procedures. Now it is obsolete and is removed.
uart_int_connect() function is removed. If UART device driver still
needs to register interrupt dynamically, it should use
irq_connect(uart_irq_get()).
Change-Id: I80c695f337456e9b0c1b0fd56716e35794f7bdb7
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In order to provide the same irq_connect() on all platforms
on x86, irq_connect() now uses a static array of interrupt
stubs. Device driver does not need to provide interrupt stub
to irq_connect() function.
Add NUM_DYNAMIC_STUBS configuration parameter, the number
of interrupt stubs used for dynamic interrupt registration.
Modify tests for unified interrupt register API
Tests that deal with interrupts are modified to work
with the new interrupt registration API.
Add CONFIG_NUM_DYNAMIC_STUBS option to dynamic interrupt projects
Projects that use dynamic interrupt handler registration on x86
have to include CONFIG_NUM_DYNAMIC_STUBS parameter in the
configuration.
Change-Id: Ic90c726485521a57cf695fd3edc8cac85d0b827d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Atom based BSPs now select an atom processor.
Change-Id: Iebe90a60d9e7f2025ce6b23fe918b86cd11fdea7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Some files were left in bsp/ after a failed rebase.
Change-Id: I26d34387d751ddd831b2dfef5c8cb6a1a8904b3c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
After moving the driver code out of the bsp directory all the code
that remains is common to all x86 platforms move the code and
assocoated config variables to arch/x86.
Change-Id: I76617070bb165fd157f0c3a127f1b9829b86c283
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Remove ARM specific driver that duplicates the platform
independent one.
Rename x86 specific driver to make it unique.
Added configuration options for random and non-random
number generators.
Change-Id: Ie1b277d2927cdfe877650ae09134db7c86becb76
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Benjamin Walsh