Callback used mqtt_publish_qos1_ack but mqtt_subscribe called with
default 0 value (MQTT_QOS_0_AT_MOST_ONCE)
Signed-off-by: Alexey Markevich <buhhunyx@gmail.com>
New config file to build an OpenThread NCP for the NRF52840-DK
via CDC-ACM USB on the connector J3 (labelled 'nRF USB').
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
zperf takes a potentially unaligned netowrk packet, casts it to a
struct, and then dereferences the fields. This causes a crash on
cores that don't support unaligned access such as the Cortex-M0+.
Use the UNALIGNED_GET helper instead.
Signed-off-by: Michael Hope <mlhx@google.com>
Also, add prj.conf options to make the sample builds on more
platforms. Finally, update the sample source to print explicit
"Finished" message, to let user know that the processing is done.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Added separator (e.g. comma or semicolon) parameter to FOR_EACH_ family.
Separator is added between macro execution for each argument and not at
the end.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Removed flow control configuration from Kconfig and updated samples
to use device tree for that.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The upload command invokes lfs_stat() on the destination file which
overflows the stack. Adding 256 bytes seems to make it work.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming multiple projects
"NONE" defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names, small, manual adjustments
have been done.
See also 7eabab2f5d ("samples, tests: Use semi-accurate project names")
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Move to using PRIu64/PRId64 instead of %llu/%lld since on
native_posix_64 the uint64_t/int64_t type is defined in terms of 'long
int' and not 'long long int'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Left unset it becomes the first partition, which is not what's used
for littlefs, and specifically isn't on the external flash for
nrf52840dk_nrf52840.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The flash interface header needs to be available regardless of
selected filesystem implementation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Support for the socketpair(2) system call was recently
added for 2.3.0 .
This change adds a sample application that demonstrates
how it can be used.
Fixes#25527
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Add a note for composite (CDC+DFU) device overlay.
Composite device CDC+DFU may not work with Windows OS host.
Windows OS does not send reset after DFU_DETACH request
(does not re-enumerates) and thus make it unable for
the device to restart in DFU mode.
For more details refer to #23337.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Currently system power management does not automatically control
device power, and this example demonstrates high current draw due to
the UART being enabled. Enable device power management and
demonstrate how to manually turn off greedy devices.
Also remove the 60 s delay that confirms we successfully turned off
the residency policy; that's not directly relevant to the purpose of
the sample.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The USB audio samples when added didn't have any tests: sections in the
sample.yaml so they would never get build on any platform as part of
sanitycheck. Add the tests: section and limit the samples to build on
nrf52840dk_nrf52840 as that was the intended platform these samples
where initially developed for.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If build with full POSIX API, use read()/write() instead of
recv()/send() calls for sockets.
We have read()/write() support for a while, but no samples/tests
actually performed at least a build test for it (so it will be
done now).
Fixes: #25407
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This makes the up_squared board default to x86_64.
This also adds a new board, up_squared_32, for when 32-bit
is desired.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Though there were issues with this sample before e959386bd2 ("samples:
servo_motor: cleanups and changes"), that commit introduced further
bugs. This happened because the new pwm-servo alias that commit
switched to wasn't provided by any boards, so it wasn't built in CI.
Before that, however, the recommendation to use bbc_microbit in the
sample documentation was also buggy in a couple of ways:
1. bbc_microbit doesn't have the pwm-0 alias the sample
previously required, so it didn't build on that board
2. the documentation's comment to use pin 0 on the edge connector
is wrong; PWM channel 0 is wired to GPIO P0.0 on the SoC,
which is actually pin 21 on the connector
Fix it all up.
Tested on bbc_microbit. I verified the pinout and also made sure that
the sample correctly generates pulses from 700 to 2300 usec.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Due to counter driver implementation change
"driver/counter/counter_ll_stm32_rtc.c: Add 1 tick to alarm"
It is necessary to adapt sample test (sanitycheck)
to take into consideration 1 tick precision/tolerance.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Add missing sample.yaml file to enable CI build tests. Local tests can
be executed executing sanitycheck:
./scripts/sanitycheck -l --testcase-root samples/net/updatehub
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The esp32 offload driver is used by shield esp_8266. This shield
doesn't have tests enabled to ensures that dependencies are ok.
This enables wifi sample to validate shield esp_8266 on CI and
consequently esp32 offload driver.
Fixes: #25386
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Paul Sokolovsky