The cs-gpios pin on SPI controller is optional for SPI controllers that
can automatically control CS line.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
LoRa radios supported by LoRaMAC-Node have a lot of common
functionality. Zephyr's LoRa implementation for the SX1276 uses
LoRaMAC-Nodes Radio HAL to implement API functionality like send and
recv. The exact same functionality will be used by the SX126x
driver. Facilitate sharing by moving that to a separate source file.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
The implementation of the board support routines is shared between all
LoRa drivers that use LoRaMAC-Node. Move them from the SX1276
implementation to a separate source file to facilitate reuse. Make
this source file conditional on CONFIG_HAS_SEMTECH_RADIO_DRIVERS since
it will be used by all LoRaMAC-Node-based drivers.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Provide basic commands that are useful when testing a LoRa
radio. Currently, the shell supports:
> lora conf ...
> lora send ...
> lora recv ...
> lora test_cw ...
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
Add an API to transmit a continuous wave at a fixed frequency. This
functionality is useful to test the radio in a lab setup.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
Get rid of legacy timeout API and move to new timeout API for LoRa.
This involves changes to API, SX1276 driver and sample application.
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
The LoRa APIs are expected to undergo some change as the usecase get's
increased. So let's mark it as experimental until the APIs got
stabililized.
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
The RTC/Counter implementation doesn't fit for the upcoming LoRaWAN
as most of the Counter drivers in Zephyr works with 1s granularity
which is not enough for LoRaWAN stack. So, k_timer calls are used in
place of Counter's alarm and k_uptime_get() APIs are used in place of
Counter's time keeping.
While at it, lets also fixup the broken alarm implementation.
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
DIO handlers defined in loramac-node are quite complex. Additionally
they call read/write operations over SPI with the sx1276 chip. This
cannot work properly in interrupt context, so call DIO handlers in
system workqueue instead.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far only GPIO pin number of registered DIO line was compared with
arguments passed to GPIO callback. This is not enough when multiple gpio
controllers are used for DIO lines. As an example when DIO0 is on PA1
and DIO1 is on PB1, then DIO0 handler is called all the time.
Compare GPIO controller (in addition to pin number) of DIO lines with
the argument passed to gpio callback, so proper DIO handler is used.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This information is filled during build time from device-tree. This is
not supposed to change in runtime, so make it const.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Part of sx1276 driver which is in loramac-node module passes to Zephyr
irqHandlers with callbacks. Some of those callbacks can be NULL and this
is true now (with the current version of loramac-node) for DIO5. If we
define all 0-5 DIOs in dts, then this results in interrupts which are
unwanted. As we do not check that loramac-node callback is NULL, then we
crash trying to call it.
Check every handler during initialization and just skip initialization
of GPIO if it is NULL. This also prevents crashes, because there is no
way GPIO interrupt to be triggered in runtime for this DIO.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Run the int_literal_to_timeout Coccinelle script to fix places where
it is clear that an integer duration is being passed where a timeout
value is required.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add a k_timeout_t type, and use it everywhere that kernel API
functions were accepting a millisecond timeout argument. Instead of
forcing milliseconds everywhere (which are often not integrally
representable as system ticks), do the conversion to ticks at the
point where the timeout is created. This avoids an extra unit
conversion in some application code, and allows us to express the
timeout in units other than milliseconds to achieve greater precision.
The existing K_MSEC() et. al. macros now return initializers for a
k_timeout_t.
The K_NO_WAIT and K_FOREVER constants have now become k_timeout_t
values, which means they cannot be operated on as integers.
Applications which have their own APIs that need to inspect these
vs. user-provided timeouts can now use a K_TIMEOUT_EQ() predicate to
test for equality.
Timer drivers, which receive an integer tick count in ther
z_clock_set_timeout() functions, now use the integer-valued
K_TICKS_FOREVER constant instead of K_FOREVER.
For the initial release, to preserve source compatibility, a
CONFIG_LEGACY_TIMEOUT_API kconfig is provided. When true, the
k_timeout_t will remain a compatible 32 bit value that will work with
any legacy Zephyr application.
Some subsystems present timeout (or timeout-like) values to their own
users as APIs that would re-use the kernel's own constants and
conventions. These will require some minor design work to adapt to
the new scheme (in most cases just using k_timeout_t directly in their
own API), and they have not been changed in this patch, instead
selecting CONFIG_LEGACY_TIMEOUT_API via kconfig. These subsystems
include: CAN Bus, the Microbit display driver, I2S, LoRa modem
drivers, the UART Async API, Video hardware drivers, the console
subsystem, and the network buffer abstraction.
k_sleep() now takes a k_timeout_t argument, with a k_msleep() variant
provided that works identically to the original API.
Most of the changes here are just type/configuration management and
documentation, but there are logic changes in mempool, where a loop
that used a timeout numerically has been reworked using a new
z_timeout_end_calc() predicate. Also in queue.c, a (when POLL was
enabled) a similar loop was needlessly used to try to retry the
k_poll() call after a spurious failure. But k_poll() does not fail
spuriously, so the loop was removed.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Same deal as in commit eddd98f811 ("kconfig: Replace some single-symbol
'if's with 'depends on'"), for the remaining cases outside defconfig
files. See that commit for an explanation.
Will do the defconfigs separately in case there are any complaints
there.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The loramac-node library uses math functions from math.h that
are not included in the minimal lib.
This commit changes the samples project config to always build
with newlib and adds a dependency to newlib.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Update the lora/sx1276 driver to the new GPIO API, using configured
active level and the replacement interrupt and active-sensitive set
APIs.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The sx1276_rx_done() function supports RSSI and SNR.
Change to support RSSI and SNR through sx1276_lora_recv() function.
Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
Introduce a new counter API function for reading the current counter
value (counter_get_value()) and deprecate the former counter_read() in
favor of this.
Update all drivers and calling code to match the new counter API.
The previous counter driver API function for reading the current value
of the counter (counter_read()) did not support indicating whether the
read suceeded. This is fine for counters internal to the SoC where the
read always succeeds but insufficient for external counters (e.g. I2C
or SPI slaves).
Fixes#21846.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
