Tests which were using the new nordic UART shim where failing
on the bsim targets. They are now fixed and tests can be
re-enabled.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The initial version of an input driver for Cirque Pinnacle ASIC supports:
* Setting sensitivity
* Choosing between relative and absolute modes
* Relative mode
* Primary tap
* Swapping X and Y
* Absolute mode
* Setting number of idle packets
* Clipping coordinates outside of active range
* Scaling coordinates
* Inverting X and Y coordinates
Signed-off-by: Ilia Kharin <akscram@gmail.com>
This commit fixes 'test_verify_send_report()' function as it was
not properly waiting for a MLDv2 report after sending a query. The
asserted value was set for the previous report sent after joining a
group.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
Deprecate CONFIG_NET_TCP_ACK_TIMEOUT as it is redundant with the
combination of CONFIG_NET_TCP_INIT_RETRANSMISSION_TIMEOUT and
CONFIG_NET_TCP_RETRY_COUNT. The total retransmission timeout (i. e.
waiting for ACK) should depend on the individual retransmission timeout
and retry count, having separate config is simply ambiguous and
confusing for users.
Moreover, the config was currently only used during TCP handshake, and
for that purpose we could use the very same timeout that is used for the
FIN timeout. Therefore, repurpose the fin_timeout_ms to be a generic,
maximum timeout at the TCP stack.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
imxrt6xx are dual core devices featuring an ARM Cortex-M33
core and an Cadence Xtensa HIFI4 Audio DSP.
Currently only m33 core is supported. In order to support
the Cadence DSP we need first to do some code-reorganization
for m33.
We start by moving all cm33 related code to its own directory
and introduce the cpuclusters property in soc.yml file.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Update prj.conf so that
subsys/net/lib/sockets/socketpair.c
is pulled into the build and zsock_socketpair() is
properly defined.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Check for the existence of
pthread_rwlockattr_getpshared()
and
pthread_rwlockattr_setpshared().
Signed-off-by: Gaetan Perrot <gaetanperrotpro@gmail.com>
This adds a board name that got missed in commit
8dc3f85622 (hwmv2: Introduce Hardware
model version 2 and convert devices)
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This commit sets `CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE=2048` for the
SiFive HiFive1 board. Otherwise, the test fails on the following assert
from Newlib:
memory space available for newlib heap is less than the minimum required
size specified by CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This commit sets `CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE=2048` for the
SiFive HiFive1 board. Otherwise, the test fails on the following assert
from Newlib:
memory space available for newlib heap is less than the minimum required
size specified by CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Set CONFIG_BT_MAX_PAIRED with same value as in host.
This is needed for CSIP tests with three lower testers:
CSIP/CL/SP/BV-07-C, CSIP/CL/SP/BV-03-C, CSIP/CL/SP/BV-04-C,
CSIP/CL/SPE/BI-01-C
Signed-off-by: Piotr Narajowski <piotr.narajowski@codecoup.pl>
Rename ad5592 files in dts, driver and include to ad559x and add support
for I2C bus which is required for AD5593.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
This commit adds CSIS command to change type of SIRK.
This is needed for CSIS/SR/SP/BV-05-C test case.
Signed-off-by: Piotr Narajowski <piotr.narajowski@codecoup.pl>
Instead of having a single config specifying the memory pool size for
variable-sized net buffers, have a separate one for TX and RX for better
configuration granularity when optimizing memory usage of the
application.
Deprecate the old configuration but use its value as a default (for now)
for the new configs. This will need to change when the config is
deleted.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There was a make-shift mutex implementation added to thrift
while waiting for C++11 thread support in the SDK. This was
fairly racey and would cause issues in CI regularly.
Make the tests build-only for now until C++11 thread, mutex,
etc support is stabilized.
Signed-off-by: Chris Friedt <chrisfriedt@gmail.com>
Based on the iis2dlpc driver, with some significant differences in
interrupt handling.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Remove explicit timeouts which are either the same as the
default one or smaller.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's increase the timeout for a few tests whose
timeout is less than 3x a typical execution time in CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test keeps its own partial way of running tests.
Let's have it kill stuck processes in the same way as
the rest (sending another kill 5 seconds after, and printing
a message about what happened)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Outgoing block-transfers now set the socket hint
to ONGOING as long as the BLOCK1/BLOCK2 header has
MORE flag set to true.
This means as only the last packet in the block-transfer
set the socket hint to LAST or ONE_RESPONSE.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
To give an idea of which tests are taking
too long either on CI or locally.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Create the folder for the results if it does not exist.
Fixes these warnings in CI:
```
touch: cannot touch '/__w/zephyr/zephyr/./bsim_bt/
53_bsim_results.xml': No such file or directory
realpath: /__w/zephyr/zephyr/./bsim_bt/
53_bsim_results.xml: No such file or directory
```
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable DMIC on RW612 BGA board. The DMIC is enabled for both onboard
MEMS microphones for this board, and the board is enabled with the DMIC
sample and test
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add necessary overlay and stm32h573i_dk in i2c_target_api test case
to enable the board.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
The gPTP is not suppose to be run on top of VLAN and the
earlier support was just for testing purposes. Remove VLAN
support now after the VLAN overhaul.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When thread stack is defined as an array, K_THREAD_STACK_LEN()
is used to calculate the size for each stack in the array.
However, standalone thread stack has its size calculated by
Z_THREAD_STACK_SIZE_ADJUST() instead. Depending on the arch
alignment requirement, they may not be the same... which
could cause some confusions. So align them both to use
K_THREAD_STACK_LEN().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When kernel stack is defined as an array, K_KERNEL_STACK_LEN()
is used to calculate the size for each stack in the array.
However, standalone kernel stack has its size calculated by
Z_KERNEL_STACK_SIZE_ADJUST() instead. Depending on the arch
alignment requirement, they may not be the same... which
could cause some confusions. So align them both to use
K_KERNEL_STACK_LEN().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The reserved flash space for coredump is 4KB. However,
the dump_stack itself is larger than 4KB due to kernel stack
size adjustment. So enlarge the space for another page.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Simple rename to align the kernel naming scheme. This is being
used throughout the tree, especially in the architecture code.
As this is not a private API internal to kernel, prefix it
appropriately with K_.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Simple rename to align the kernel naming scheme. This is being
used throughout the tree, especially in the architecture code.
As this is not a private API internal to kernel, prefix it
appropriately with K_.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Since there is a K_THREAD_STACK_LEN, its kernel counterpart
should also be prefixed with K_ for consistency.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Krzysztof Chruściński