Revises microkernel semaphore sub-system to allow ISRs and fibers
to give a semaphore without having to define a command packet set.
The microkernel server now supports a 3rd command type on its
command stack, allowing a semaphore to be given in a similar manner
to the one used for the existing "give event" command type.
Change-Id: Ibd7fb1a77949792f72acd20a9ee304d6eabd62f7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
We are interested in supporting some XIP x86 platforms which are
unable to fetch CPU instructions from system RAM. This requires
refactoring our dynamic IRQ/exc code which currently synthesizes
assembly language instructions to create IRQ stubs on-the-fly.
Instead, a new approach is taken. Given that the configuration at
build time specifies the number of required stubs, use this
to generate a build time a set of tiny stub functions which simply
push a 'stub id' and then call common dynamic interrupt code.
The handler function and handler argument is saved in a table keyed by
this stub id.
CONFIG_EOI_HANDLER_SUPPORTED removed, the code hasn't been conditionally
compiled for some time and in all cases we call _loapic_eoi() when
finished with an interrupt.
Some other out-of-date verbiage in comments related to supporting
non-APIC removed.
Previously, when dynamic exceptions were created a pointer would
be passed in by the caller reserving ram for the stub code. Since
this is no longer feasible, two new Kconfig options have been added.
CONFIG_NUM_DYNAMIC_EXC_STUBS and CONFIG_NUM_DYNAMIC_EXC_NO_ERR_STUBS
control how many stubs are created for exceptions that push
an error code, and no error code, respectively.
SW Interrupts are no longer triggered by "int <vector>" hard-coded
assembly instructions. Instead this is done by sending a self-directed
inter-processor interrupt from the LOAPIC, using a new API
loapic_int_vect_trigger(). In this way we get rid of dynamically
generated code in irq_test_common.h.
All interrupts call _loapic_eoi() when finished, since this is now
the right thing to do for all IRQs, including SW interrupts.
_irq_handler_set() for x86 no longer requires the old function pointer
to be supplied.
Change-Id: I78993d3d00dd153c9051c518b417cce8d3acee9e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In order to have a name according to the functionality of the feature.
This commit rename any text, function and variable related with the
Profiler name to Event logger.
Change-Id: I4f612cbc7c37965c35a64f06cc3ce5e3249d90e5
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
These tests ensure the functions manipulate data as expected.
They do not currently test atomicity.
Change-Id: I3646b3a55ffb895c56dbb0d0bc39da5e1138e7a5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This simplify the handling quite a bit while the application can still
prevent the buffer to be freed by referencing it if necessary.
Change-Id: I5ed0e96e8d9e349b79ba31ba9568af61181e1065
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The test causes random failure so remove it temporarily.
Change-Id: I0b74877ad27d673099d0eecb191b6978bf9b40ee
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Buffer received over L2CAP dynamic channels needs to be unref by the
application once they are done with it.
Change-Id: If210be1c538cf0b550dd03094d007b6851cdfbf4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Networking code is in net directory in other parts of the
code base so rename network -> net in samples/microkernel/apps
directory.
Change-Id: Ic89d4616a28b4079f90351938f9798c7bf61ce05
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Networking code is in net directory in other parts of the
code base so rename network -> net in samples/nanokernel/apps
directory.
Change-Id: I5684f569f75aa0a9d66128cf786e60ced79fbaf0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Networking code is in net directory in other parts of the
code base so rename network -> net in samples directory.
Change-Id: I0ca0188c6844b0957270398d08b85a3153819e97
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The space that the HCI driver needs to reserve for its own use is not
necessarily symmetrical. E.g. even with the current H4 driver we only
need to reserve space for sending data but not for receiving it.
Keeping track of these values independently enables more efficient use
of the buffers.
Change-Id: I64917b545c5cd77356ed038d09afe76422334661
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add sanity test related changes to test_15_4 application in both
micro and nano kernel. config_whitelist in testcase.ini is not
accepting other than PLATFORM configs. So creating test folder
for sanity tests. src directory is still common for all.
Change-Id: Iffa4c588500367fa475aef8e0772f1c08946c5a4
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add support for CONFIG_NET_15_4_LOOPBACK_NUM in test_15_4 application.
Change-Id: I57246f9db587f492cddc0d0be607b1ae4a78fbf7
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Now that we have the buffer type enum as part of the HCI driver API we
can take advantage of it to pass the buffer type information and not
have to have two separate callbacks.
Change-Id: Ib2ee5b1540e532c9b27903e97660a276c1293fbc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is a necessary step in preparation for removing the buffer type
information from the buffers.
Change-Id: I29d8fae32aa660416a1c12e87840499c711e659f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This allows to build sanity for both ARM and x86 archs.
Only supported platforms are enabled.
Change-Id: I499dbdee7b9df265affb2bba98b5bb100339fe18
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Tester application requires 3 UARTs and currently no x86 based
platform supports it. For convenience default to arch that allows
to run, not only build tester.
Change-Id: I086e72a580f56d94181a6d6eada7693ddd24dec1
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Convert the code to use the net_buf API instead of the soon to be
removed bt_buf API.
Change-Id: I98a0720483d3f364b77fe6dc030c9169aa4ade67
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert the code to use the net_buf API instead of the soon to be
removed bt_buf API.
Change-Id: I4eb6cea592cce99dcc9e4c1b1219ebbf89eddd04
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We need to have a generic buffer API in order to efficiently transfer
data between different subsystems. The first such case will be the
Networking and Bluetooth subsystems where 6LoWPAN data will be passed
back and forth.
The needed API needs to provide enough flexibility for different
buffer sizes as well as custom protocol-specific context data.
The implementation offered in this patch follows the general design of
the existing Networking and Bluetooth buffer implementations by using
a backing array of buffer which is fed into a "free buffers" FIFO for
management. The main difference is that the API allows specifying
variable sized buffers for each created pool, as well as a minimum
amount of "user data" that's allocated as part of each buffer.
There's also an optional destroy callback that's e.g. useful for HCI
flow control in Bluetooth (for notifying the controller of available
buffers).
Change-Id: I00b7007135a0ff35219f38f48658f31728fbb7ca
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Currently it is only possible to build the tester for arm.
Change-Id: I7fd530ca09bfa41072420da774fba3b48a5d5a90
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes BT_GATT_CHARACTERISTIC declare a local bt_gatt_chrc so the
applications don't need to declare themselves.
Change-Id: Icf3fad7dffea5667c6f13aa022a5722900da51e8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The spec says it should always be the very first descriptor after the
characteristic:
"BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part G] page 534:
3.3.2 Characteristic Value Declaration
The Characteristic Value declaration contains the value of the
characteristic. It is the first Attribute after the characteristic
declaration. All characteristic definitions shall have a
Characteristic Value declaration."
Change-Id: I6c38dea9cc4c1a05997edbd348e2759680472725
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
value_handle is not used for anything.
Change-Id: I3885d221b162eb3bd44956af64280baf61dc001b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_gatt_register will assign a handle if not initialized and removing
the handle makes it simpler to change the attributes since it is no
longer possible to have conflicting handles.
Change-Id: I787f7325cc990c360056b1aefd07bb7d7876b445
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allow calling bt_gatt_register multiple times so different tasks
can add their own services separately.
Change-Id: I8143ddedfa1079087d608013d1a97b552a3007dc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch adds a NET_INTF makefile configuration option to the
echo_server sample application to allow Ethernet support to be enabled
by specifying NET_INTF=ethernet. It currently includes specific
support for the Ethernet device in the Intel Galileo.
Change-Id: I6b605db32d2d8a4259fc003724b2daa11c9a26d9
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
We want to make the naming convention ref/unref rather than get/put.
So far the only reference counted objects are the buffers and the
connections. For the buffers the new generic buffer API will also use
ref/unref.
Change-Id: I9fe8b8a6a50a8baf06ba231e8f6717a5a47dd292
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the attribute value is going to be changed by the upper tester,
(eg. to issue notification) for simplicity it can be stored in the
place of old one.
Change-Id: I03a6ebbda5d75e6ffa9c2fd6b3c0eab495623a11
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This allow sending direct notification to a specific peer without
using CCC which is allowed by the spec:
BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part F page 507
3.4.7.1 Handle Value Notification
A server can send a notification of an attribute’s value at any time.
Change-Id: Ieff29216cb9ba197c0da92d7b22b26e63101cfa8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Set discoverable command is used to set the discoverable flags
in advertisement data.
Change-Id: If46a5e05379c5f589afb1658a7b275a82c52e4e1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds an option to enable L2CAP dynamic channel support, fixed
channels are not affected by it.
Change-Id: If36bece46b7b94142ea1ac976b878d1b5ae6a578
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap-register can be used to register a server:
btshell> l2cap-register 0x0080
bt: bt_l2cap_server_register (0x0011110c): PSM 0x0080
Change-Id: I2c2d9a4cba70b0cddaf352830659d206b609ee63
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The \NOMANUAL tag is a remnant from days of yore and is no longer
needed or useful. Cleaning up the code references to this.
Change-Id: I1b8cc9c9560d1dbb711f05fa63fd23386789875c
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
an ifdef was removed leaving the endif in place, this restores
the origin ifdef.
Change-Id: Ibc4863e3d09c1c09525276ca8ae4aa9e52fbd568
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch enables defining microkernel events within source code.
This is similar to other private kernel object patches.
The test has been modified a little bit due to the fact that
the event ID is now a memory address, instead of numeric ID.
Change-Id: Ie3c8d4f4e459d9c631e50bb242cf7a05ca8ea82c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Cleanup header inclusion and only include zephyr.h in samples
and applications.
Change-Id: If7460f4c6305a1c1cfcfdcf6a9bb7423f410c5c6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates the 'gen_idt' tool to generate a mapping of IRQ numbers to
interrupt vector IDs, thereby allowing the IRQ priority to be utilized
when statically connecting an interrupt.
Change-Id: I2e54ceb65145682820dfbd8ca1ee6ec68d71ce1a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I2f28a4dd2b1b372905638cbccdf987396999d7ec
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Only driver specific public headers should be found in include/drivers.
All generic API are found in include/ directory.
Change-Id: Ic50931987bb9460fd4a3843abc6f5de107faf045
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
With this patch device name obtained from advertising packets
will be printed out.
[DEVICE]: D0:03:4B:DA:10:46 (public), AD evt type 0,
RSSI -83 AppleLETester
[DEVICE]: D0:03:4B:DA:10:46 (public), AD evt type 4,
RSSI -82
[DEVICE]: 00:A0:50:00:00:08 (public), AD evt type 0,
RSSI -80 BLE Keyboard
Change-Id: Ic5116bce958d5b4479d481c40b2658ab56ecb819
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch makes attributes discovery more easier from the point
of shell application user.
UUIDs of discovered attribute declarations are now printed.
For services handle range is shown.
btshell> gatt-discover-primary 1800
btshell> Service 1800 found: start handle 00000001, end_handle 0000000b
Characteristic properties are parsed to string and printed
with characteristic value handle.
Characteristic f000ffc1-0451-4000-b000-000000000000 found: handle 0000006a,
value_handle 0000006b
Properties: [write][write w/w rsp][notify]
Change-Id: I6823fa562206ccf336dc301ee71bc4a02cecc14f
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Allan Stephens