Using level will just flood the handler, as the concerned gpio pins
stays on level for some time.
Change-Id: I991d818783170b09c326350c04bb588c7324892c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fixing the flash script so that we only have one for the process of writing
out the ROM and the OS images.
Change-Id: I6fc8bd8eee553a17c0036da3ce5b89510f3b57d8
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
- Use interface script from openocd distribution
- add debug support
Change-Id: If7e0ab0ad1fc6e67ca648a0a7c32356b3db90cf0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
First pass at a script/process that an end user can run to backup and restore
the binary state of an Arduino 101 system.
Change-Id: I5979bdea5aaa2a77b0e0bb0e44de65ba74cbfd65
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
As the UART uses I/O port access, it needs to be pointed out
to override default MMIO setting.
Change-Id: Ibf923b5cab547f9eec991900c5f7a8b2ffbc3832
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Add tester support for arduino_101 board reusing UART1.
Change-Id: Ifc00f92a80accffc37fd9b09df798ff995340a1c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Using the latest SDK (0.7.2) you can flash directly using make
by specifying the board, for example
make BOARD=arduino_101 flash
This will build and flash the generated binary to the board.
Change-Id: I90254abd69874efbb449ef318079958980c23074
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds the pinmux driver for use with Arduino Due.
The default for pinmux (mostly) reflects the pin layout
on the board.
Change-Id: I80827ee8bc507567e0cc04b3c8c48580aadf2b3f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Move BLE configuration to board and enable GPIO for NBLE.
Change-Id: I99c309656430936edf6766fc99fe83b011801bb4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Set options and baud rate to communicate with NBLE chip.
Change-Id: I338aad3b1dc03b809aade29eedac7093ea346a5e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This is the last step before obsoleting DEVICE_DEFINE() and
DEVICE_INIT_CONFIG_DEFINE().
Change-Id: Ica4257662969048083ab9839872b4b437b8b351b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_DEFINE() so that it fits in the 'device' namespace.
Change-Id: I3af3a39cf9154359b31d22729d0db9f710cd202b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_INIT_CONFIG_DEFINE(), because (a) it was not fitting
in any namespace and (b) it is not used to declare, but rather define a
object.
Change-Id: I1da5822f06b85a9fb024b5b184afd0ccc01012ec
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
SPI needs to get its interrupt configured as triggering on level high to
work properly. This is specific to Quark SE (thus x86 core).
Change-Id: If3921240709e0fbf5b26e2325f67eb977a9fac10
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These are the default ones for the internal CC2520 chip found on the
Quark SE SS devboard. GPIO 11 is used to emulate CS.
Change-Id: Ibc564176f1f77edeb7f25df3567de8c334703795
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
SPI, to control the CC2520 chip, is the only generic feature and thus
the only one configurable through Kconfig. GPIO on the other end depends
a lot on the SoC/Board. Adding a slave select option as well.
Change-Id: I63068fab476ed8d5b26103e4ad20e5be253c9932
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Support for running cc2520 radio found on Quark SE devboard.
Change-Id: Ib0781489e3ebae8569a13c35d3fe6a6d87ac9a3b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This adds very basic support for running on Arduino Due.
Only the nanokernel hello_world has been tested.
Change-Id: I42b83d7f23ff88f709d2d6f2d43c6d29c82b9d32
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Ben Walsh identified a few functions can be removed as they provide
duplicate code except for one small variant (register number). Making
a common function that takes the register position as an input, it is
possible to remove an entire function, saving on code space.
Change-Id: I1850f461ed6d85f42aaf85745e1c2557850cdbad
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
It's basically the same pinmuxer as in CTB with different external
sensors wired to it.
Change-Id: Icea89a72b805d6dd2c5798c3f517c4fb00c819c9
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The production version is slightly different than the internal
development board, so the pin mux description has been updated.
Change-Id: I0235ed9eb480a1fd713843dd1b3b5c7856e7132b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Shorten the name and remove the vendor prefix. No need to add
vendor to board names.
Change-Id: I68d441121c4034276706da63d7e5420ddf317149
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Both WIFI_DISABLE_N & PCIE_RESET_N are output pins which control the
mini-PCIe, so fix the pinmux settings accordingly.
In addition, to avoid resetting the mini-PCIe card, keep PCIE_RESET_N
high.
Change-Id: I7478a7ee5771d8840c53ec4e9cc15551d31653e3
Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Ido Yariv <ido@wizery.com>
Static function was declared after it was used.
Change-Id: I7872d9aedef34d0e1e68e6475bea8afcd0496f69
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is a generic Atom configuration that can be inherited by boards
with Atom SoC like the minnowboard.
Change-Id: I06ab999062be7811d14755fd34440dee8f8b81ed
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
No need for the same SoC configuration with different names. Use IA32
as the "SoC" for qemu_x86 "boards".
Change-Id: Iee00538701c5ece14d0c3df637b0aaa54790f0e2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use a real board name that can run this kernel instead of a generic
name. Basic functionality exits on this board with Zephyr.
Setup of the board is mostly similar to what we have in galileo (EFI
based)
Change-Id: Ic8554f26dcac0dbbbb6d35d863482f6207dc63c5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previous it was renamed in favor of Qemu, now that we have board support
we move this to the original name and derive a qemu board out of the
platform.
Change-Id: Ia8769b27defa0a39503ecf2e6ec7fc6304b6ff49
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit also renames boards and makes naming consistent between
board name and defconfig files.
quark_d2000_reference -> quark_d2000_crb
quark_se_test_sss -> quark_se_sss_ctb
quark_se_test -> quark_se_ctb
Change-Id: Ibe6a5102edb987fe1d6ce32c8c392a87d45d6951
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We had one pinmux per platform with support for multiple boards.
This moves pinmuxing to boards as first step. Common functions that
are exposed by the API need to be moved to driver while keeping the
muxing configuration with the boards.
Change-Id: I2b4fabf663db98d644abcb5d51ba83adc6f74541
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Galileo pinmux configuration and reboot code belong into
the board and not the SoC.
Change-Id: If862178569438a8901902088bd085275416c25ef
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Define boards based on platforms/SoCs and define them under boards/.
Also unify the naming of all platform, SoC and board files and use
platform.h for platforms and board.h for boards.
Change-Id: Icfeb96479ab5800aca98c80a79bdc3cecd645314
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Galileo board is based on the X1000 SoC, so move galileo to
boards and create this SoC instead, inheriting all SoC related code
and configuration items.
Change-Id: I9b39f1b44644775ee48acae284b82bae7876fffb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
First step for adding the new board layer. Create configurations for the
various boards we support on x86 under boards with the new Kconfig variables
defining them.
The board selection is optional, that means you will be able to run
make menuconfig
and create your own .config and select any SoC.
Change-Id: If08e88e9675d13f0f0501ef6750b9424b15f5dc8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Daniel Leung