Adds the struct to describe PDC (Peripheral DMA Controller).
The PDC is being used by peripherals to initiate DMA
transfers.
Change-Id: Ida2a20810c4f2ef972e9669c45e22da07c1576ab
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds logger support to iamcu core for the following features:
- context switch logger
- interrupt logger
- sleep logger
Change-Id: Icfbd5fa787633045ba2895e8c28b652c55575b86
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
The common stub code didn't prefix the arg to 'mov' with a
'$', causing the assembler to generate code which tries to
dereference the argument before sticking it in EAX.
Change-Id: I0e201f799565d9709e3969b82ae2eb3f93a78b3a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The ASM stub invoked by irq_offload() wasn't switching to the
interrupt stack.
Change-Id: I0c52092a50396aa892e71f0501bbda38395d7554
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Making pipe driver configuration for quark_se makes no sense for the
board. First it simply wrong since IRQs for serial are 5 and 6 and
when using PIPE care should be taken to allocate right way serial and
Bluetooth for the given UARTs.
Change-Id: I4cb3227a8be34fbfa089a457e6d9977e4adcfd19
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
QUARK_SE_IPM_CONSOLE_RING_BUF_SIZE32 symbol must be editable through
configuration menus and configuration snippets (QA request).
Adding a title for the kconfig symbol makes it editable.
Change-Id: Id0147a50d94033e1392327935bcbfbdb5a9eedd8
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This driver uses the QMSI library and mostly translates calls from the
Zephyr API to QMSI ones.
This driver conflicts with the native driver implemenation. In order to
enable it, you must set:
CONFIG_QMSI_DRIVERS=y
CONFIG_QMSI_INSTALL_PATH="PATH_TO_QMSI"
CONFIG_SPI_QMSI=y
CONFIG_SPI_QMSI_PORT_0=y
CONFIG_SPI_QMSI_PORT_1=y
Missing:
- Support for using a GPIO pin as Chip Select;
Change-Id: I0d8eca88a2a803b6b3604f396f874313fe90753c
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Decisions on compiler optimizations were done on the architecture level,
this does not scale and some SoCs will have different optimization levels
or compiler options needed. Moving this to the SoC makes it easy to optimize
differently when using the same CPU which we use to set the right optimization
now on the architecture level.
For IAMCU platforms, use the right architecture and tuning.
-march=lakemont -mtune=lakemont -miamcu -msoft-float
Change-Id: I458afca5feb9be5de8dcae559d6dcac3c6d6a2a7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The default Kconfig option is missing a condition for the SRAM
base address on SAM3X8E. Add it back so the correct default
can be used.
Change-Id: Ib4103366f693648c76630cbbd71ca98109381d5c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The PIO controllers on Atmel SAM3 family processors can be
used for GPIOs, so this is the driver.
Change-Id: I3d5712f3a0a71025b820ca1c08dd767ee1e136d8
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Due to an issue with the interrupt-based transfer API from QMSI driver,
the 'transfer' callback from the shim driver (i2c_qmsi_transfer) is
implemented with polling APIs. This is not ideal because we are not able
to sleep the current thread (so another task can be scheduled in) while
the i2c operation is carried out.
The interrupt issue with the QMSI driver has been solved then this patch
fixes the shim driver so it uses the interrupt-based API and adds extra
code to handle the thread synchronization.
Finally, this patch also moves all 'struct device' related definitions
from the bottom to the top of the i2c_qmsi.c file so the DEVICE_GET
macro can be used in transfer_complete() and removes the init.h include
since it is not needed anymore.
Change-Id: I7ef7ce4cea6fcc939e310e5fe12c406645f6a16e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
IRQAGENT3 is initialized explicitly, but IRQAGENT0 isn't and its value
is based on the value the BIOS or bootloader had set before. Fix this by
explicitly initializing IRQAGENT0, and swizzle the IRQs to reduce
conflicts.
Update the pci_pin2irq function to accommodate for these changes.
Also remove pci_irq2pin function since it is unused.
Change-Id: I7b1dfc7659ab227fe66711a3af5a1f34fd4a7972
Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Ido Yariv <ido@wizery.com>
To debug PCI drivers on QEMU, it may be desired to enable CONFIG_PCI for
QEMU targets. Since the PCI driver requires a SOC pin2irq translation
function, add such function to IA32's SOC header file.
Change-Id: Icf6f88aa14ae29d70fe12dc80a708e6a2e992ba8
Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Ido Yariv <ido@wizery.com>
We don't normally need a runtime-mutable GDT; make it optional to
activate a second copy in RAM. Regardless of whether it is in RAM
or ROM, it can be accessed by the '_gdt' symbol.
Change-Id: I5ce955f4b8875eb60040917ceaacc07d7e5941ac
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move BLE configuration to board and enable GPIO for NBLE.
Change-Id: I99c309656430936edf6766fc99fe83b011801bb4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds basic support for communication with Nordic BLE (NBLE) chip
connected to UART.
Change-Id: I3651e291ec18805a63ecd3d240dce62273e3c498
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
It's not a function and requires all its arguments to be build-time
constants. Make this more obvious to the end user to ease confusion.
Change-Id: I64107cf4d9db9f0e853026ce78e477060570fe6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Mostly SoC initialization and some kernel subsystems, but also some
device drivers like the interrupt controllers.
Change-Id: I8dc1844c33acd877c075b6b03558fdca6f87500b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This is the last step before obsoleting DEVICE_DEFINE() and
DEVICE_INIT_CONFIG_DEFINE().
Change-Id: Ica4257662969048083ab9839872b4b437b8b351b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_DEFINE() so that it fits in the 'device' namespace.
Change-Id: I3af3a39cf9154359b31d22729d0db9f710cd202b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Most systems have far less than 256 IRQ lines available, so
save some bytes in ROM by making this a config option.
On systems with MVIC, omit the table entirely as the mapping
is fixed.
The build cmd_gen_idt is slightly easier to read and will fail
immediately if any of the commands in the sequence error out.
Change-Id: I411f114557591e5cd96b618e6f79f97e8bedadf0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rename it to DEVICE_INIT_CONFIG_DEFINE(), because (a) it was not fitting
in any namespace and (b) it is not used to declare, but rather define a
object.
Change-Id: I1da5822f06b85a9fb024b5b184afd0ccc01012ec
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This bitfield is only needed to find unused vectors in the IDT
for installing dynamic interrupts.
Change-Id: I34ecd330774a0e50f240b4396527682eded29627
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Static interrupts rely on a trick where the _sw_isr_table array
is declared with each element in a different .gnu.linkonce
section, initially pointing to the spurious IRQ handler.
When drivers or apps declare their own interrupts, they override
the element with their own containing the real ISR and parameter.
However, this only works if the initial declaration of the
_sw_isr_table array with the spurious handlers is linked last.
App-specific code was being linked later than the core code,
causing static interrupts declared in apps not to be installed
correctly.
If the _sw_isr_table is moved from SOC-specific code to core arch
code, interrupts configured under soc/ should still also work.
Change-Id: Iec7df47386dfbbf2956a807da27dc8aa6e01b268
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This simulates a reboot by jumping back to the address stored in the
reset vector in vector table found at address 0. It is supported from
interrupt/exception level, which means that sys_arch_reboot() in this
case finds out if it is called from thread mode or handler mode, and in
the latter case, it unwinds the nested exception stack as needed.
Change-Id: Ib67f850f8411f1ee8fc592a5f31f2f70d0af14a4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The bootloader expects the entry point to be called __start, not __reset.
Change-Id: I5a5f7f45c248b9398e58fb026c731f8617fe4856
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add sys_exc_connect() (and its x86-compatible alias nanoCpuExcConnect())
that allows connecting an exception handler at runtime.
The current implementation is a bit of a bastard, to avoid disturbing
the current implementation of the exception handlers. Instead of hooking
_exc_wrapper() in all vectors and adapting the exception handlers, the
current exception handlers are still hooked directly in the vectors.
When an exception is hooked at runtime, _exc_wrapper() gets installed in
the vector and the real handler gets inserted in _sw_exc_table; this
means that the scheme only works with non-XIP kernels.
This should be enhanced so that _exc_wrapper() is hooked in all vectors,
and that current exception handlers (for faults mostly) are reworked to
be inserted in the _sw_exc_table and wrapped in _exc_wrapper().
Change-Id: Icaa14f4835b57873d2905b7fbcbb94eeb3b247d1
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
For non-XIP systems, it's not in ROM, so remove the "ROM" part. Adapt it
to coding conventions at the same time, and export it to C code.
Change-Id: Id09a6be8bc9c462667ed71b53be7fa5382c88db3
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Find out on which stack the stack frame for an exception is in the assembly
code (__fault()) rather than in C (_Fault()). This will allow pushing
more registers on the stack when debugging is enabled.
Change-Id: I1c510b83098536f8930392b17df27511ccd04d80
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename the function and allow it to handle the 'type'
argument, which is ignored in this case.
Change-Id: I3d3493bea4511b2d026747505e7e52c5acc85012
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The ESF was built using the 'alias' names of the GPRs (a1, lr, pc, etc)
rather than their 'real' name (rN).
Change-Id: I49cae5e94869a79a3165dc7f2347d8cec39dbf67
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The processor is made aware that the vector table built in the image is
located at the start of SRAM in the case of a non-XIP image, rather than
at 0 in as is the case in XIP images.
Change-Id: I40b28ca32daf3e8930f103224766ed4e0ccc88e0
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The image will be linked at a different address and with different
ROM/RAM sizes to allow running a bootloder image that loads a payload
image. The addresses/sizes depend on if it is a XIP image or not
(CONFIG_XIP), and in the case of a XIP image, if it is a bootloader
image (CONFIG_IS_BOOTLOADER) or not.
In the case of a bootloader, it is given the full ROM and
CONFIG_BOOTLOADER_SRAM_SIZE kB of SRAM. When not a XIP image, it is given
the full SRAM minus CONFIG_BOOTLOADER_SRAM_SIZE kB, and is linked at the
start of SRAM.
Change-Id: Ibbb693c7bff022f313dac40f21c04a61f4bed115
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This board needs 16 bytes to be written with a specific value when the
target boots. This is only necessary when running a XIP image which
exists around those 16 bytes.
Change-Id: Ifd26b3842f09137765d9c7d1678476bfda8a563f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Vlad Lungu <vlad.lungu@windriver.com>
Fix an issue where, if a task is pending on a nano timeout, the duration
it wants to wait is not taken into account by the tickless idle code.
This could cause a system to wait forever, or to the limit of the timer
hardware (which is forever, for all intents and purposes).
This fix is to add one field in the nanokernel data structure for one
task to record the amount of ticks it will wait on a nano timeout. Only
one task has to be able to record this information, since, these waits
being looping busy waits, the task of highest priority is the only task
that can be actively waiting with a nano timeout. If a task of lower
priority was previously waiting, and a new task is now waiting, it means
that the wait of the original task has been interrupted, which will
cause said task to run the busy loop on the object again when it gets
scheduled, and the number of ticks it wants to wait has to be recomputed
and recorded again.
Change-Id: Ibcf0f288fc42d96897642cfee00ab7359716703f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adds C++ support to the build system.
Change-Id: Ice1e57a13598e7a48b0bf3298fc318f4ce012ee6
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds extern "C" { } blocks to header files so that they can be
safely used by C++ source files.
Change-Id: Ia4db0c36a5dac5d3de351184a297d2af0df64532
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Introduce the GPIO QMSI-based implementation. This is basically a
shim layer that implement's Zephyr's GPIO APIs on top of QMSI drivers.
This is an alternative driver that conflicts with the previous
GPIO_DW implementation. In order to enable it you must set:
- CONFIG_GPIO=n
- CONFIG_GPIO_QMSI=y
- CONFIG_GPIO_0=y
- CONFIG_QMSI_DRIVERS=y
- CONFIG_QMSI_INTALL_PATH="PATH_TO_QMSI"
Note that this driver currently only supports one controller instance,
GPIO_0. It is implemented this way due to a limitation from the current
version of QMSI. QMSI versions later than 1.0 doesn't have this
limitation.
Missing:
- support multiple controller instances (gpio_0, gpio_1, etc);
- enable level triggered interrupts in sync with system clock,
through setting INT_CLOCK_SYNC properly.
Change-Id: Ib61b153dae9741806a9a31d7dc1f82b96d000fbe
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
It wasn't immediately clear in _execute_handler() that
enable_interrupts() didn't actually do anything if
CONFIG_NESTED_INTERRUPTS wasn't enabled.
If we are not using nested interrupts, perform small optimization
1) The call to disable interrupts isn't necessary as interrupts
are already disasbled
2) The check for !_nanokernel.nested in a couple places always
evaluates to true if nested interrupts aren't used
Change-Id: I7e66cee0466d03bc1172a572e19389accf6e0e62
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
On Quark SE, SPI might require GPIO to be ready before hand, to emulate
CS, thus providing an option to tweak the intialization priority for SPI
DW driver.
Change-Id: Ifa373948ac8227bf6e4ed1113bcb4dc9139b6663
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Enable both controllers by default if GPIO is enabled, providing all the
necessary information.
Change-Id: I5aab00324b10492eefb67e9595da491775cbd95d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no such thing as "IA" in Quark SE SS as it is an ARC core. Plus
for this very specific feature it does not require the ARC aux regs
instruction to read/write in the given mask address.
And fixing also the CONFIG_ option to check.
Change-Id: I1f63348ec85f6e006795f7641c912a30fc003709
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Quarks SE owns a GPIO controller which is always on (so not clock-gated)
thus providing it base address, the pins it handles etc...
Change-Id: Ifceb7cb74e763a91130d615ba19756ddcbe97a23
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is valid only for Quark SE and Quark SE SS, where it requires to
unmask the interrupt for each specific controller. Thus making the
function generic, using the parameter as the specific mask base address.
Change-Id: Iea0a412b8d94a1ab5e1f3e339eaf632eacee5797
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We can save a great deal of RAM this way, it only needs to be
in RAM if dynamic interrupts are in use.
At some point this config option broke, probably when static
interrupts were introduced into the system.
To induce build (instead of runtime) errors when irq_connect_dynamic()
is used without putting the table in RAM, the dynamic interrupt
functions are now conditionally compiled.
Change-Id: I4860508746fd375d189390163876c59b6c544c9a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Daniel Leung