This patch adjusts L2CAP CoC related command and responses to the
recent BTP API changes.
BTP has been extended with Enhanced CoC support, thus few L2CAP
CoC related commands have been changed.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Deprecate BT_LE_ADV defines in hci.h that are expected to be used by the
application in the scan received callback to identify the advertising
PDU type. These defines are mixing HCI input parameters and advertising
PDU types. Internally it is acceptable to mix these, but at the API we
should to mix in them.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Deprecate bt_create_conn_le and rename it to in order to add return
code, new arguments and to follow the established naming convention.
Add API for the application to control the scan parameters of the
initiator role. This allows the application more scheduling control
of the initiator in multi-role scenarios. Also provides options to
configure the initiator for LE Coded PHY for long range support.
We deprecate the old way of creating connection to make the name more
consistent with the rest of the API.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The service registration logic was using the wrong variable to check for
a pending service to be registered, which led to the same service being
registered twice in some cases. Fix the logic so that a pending service
is only registered once.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since we enable CONFIG_ASSERT in the tester app, the logging subsystem
will assert if it detects a missing log_strdup. Add the two missing ones
that I could find to properly log transient strings.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implement the BTP command to set MITM, although on Zephyr this is not
configurable at runtime. Instead print a warning instructing to use the
CONFIG_BT_SMP_ENFORCE_MITM Kconfig option instead.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implement the BTP GAP command and event for passkey confirmation.
This also allows us to set the passkey_confirm auth callback which
enables the keyboard/display IO capabilities.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since some tests require MITM to be off, disable the option that forces
the MITM flag at all times.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Disable stack measurements by default, since they pollute the log
output.
Ensure that the logging thread has enough stack.
Ensure that the UART that connects to the BTP client is
interrupt-driven.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a configuration file for the nRF52840 DK so that it uses RTT for
debugging and enables more protection measures.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
- Use the built-in mechanism for configuration overlays
(having a boards/ folder with <board>.conf fragments)
- Clean up variables that were giving warnings
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
BT_MESH_PROV is already selected by BT_MESH_PB_ADV and BT_MESH_PB_GATT,
which these configuration files enable.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Make the channel ops struct const since there really isn't anything
there that needs to change at runtime. The only exception is the L2CAP
shell which was playing with the recv callback, however that can be
fixed by introducing a simple bool variable.
With tests/bluetooth/shell this reduces RAM consumption by 112 bytes
while adding only 16 bytes to flash consumption.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Expose the bt_uuid_to_str function as an API to the application.
This aligns this function with the bt_addr_to_str function call. This
allows the application to use this function without having to enable
the BT_DEBUG option.
Move the in-place bt_uuid_str to internal logging, this is mainly done
due to the limitation in the log_strdup that shouldn't be exposed to the
application.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This define is not of use anymore since there's a global net_buf user
data Kconfig variable and its definition already guarantees a
sufficient minimum for Bluetooth.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
With the changes in PR #19836 applications now need to explicitly
include hci.h to use defines from it. Fix two sample/tests apps which
were missing this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds support to set different permissions to CCCD so security can
be checked when enabling notification which conforms to:
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part G page 2360:
'3.3.3.3 Client Characteristic Configuration
Authentication and authorization may be required by the server to
write the configuration descriptor.'
In addition to that also ensure that notification are not re-enabled
until the proper security level is reached to conform to the following
statement:
'10.3.1.1 Handling of GATT indications and notifications
A client “requests” a server to send indications and notifications
by appropriately configuring the server via a Client Characteristic
Configuration Descriptor. Since the configuration is persistent
across a disconnection and reconnection, security requirements must
be checked against the configuration upon a reconnection before
sending indications or notifications. When a server reconnects to a
client to send an indication or notification for which security is
required, the server shall initiate or request encryption with the
client prior to sending an indication or notification. If the client
does not have an LTK indicating that the client has lost the bond,
enabling encryption will fail.'
Fixes#17983
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Rename bt_conn_security to bt_conn_set_security, this makes the API
naming more consistent.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename security level enum, using level and number instead of low,
medium, high and fips.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This removes the necessity of registering the storage for CCC and make
it part of the declaration itself.
Fixes#18547
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This will handle BTP Discover All Primary Services command.
Related TC: GATT/CL/GAD/BV-01-C
Fixes: #17861
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This changes RPA timeout so that the address is changed every 60
seconds. This change is needed to speed up privacy related test cases.
Currently, the new RPA was initiated on request that was a bit hackish
and could be done via BT_RPA_TIMEOUT Kconfig option.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This updates tester application to recent changes in BTP related
to Connection Parameters Update.
Connected event has been extended with connection parameters.
Connection Parameters Update command and event have beend added to
initiate and track current connection parameters.
Needed to automate qualification test GAP/CONN/CPUP/BV-06-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This enables support for GAP writable device name in tester application
for testing purposes.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move atomic.h to sys/atomic.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The first word is used as a pointer, meaning it is 64 bits on 64-bit
systems. To reserve it, it has to be either a pointer, a long, or an
intptr_t. Not an int nor an u32_t.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The DT spec. only has "okay" and not "ok". The Linux kernel has around
12k "okay"s and 300 "ok"s.
The scripts/dts scripts only check for "disabled", so should be safe re.
those at least.
The replacement was done with
git ls-files | xargs sed -i 's/status\s*=\s*"ok"/status = "okay"/'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This tries to build gpio without any driver which fails at cmake time
like this:
CMake Error at ../../../cmake/extensions.cmake:378 (add_library):
No SOURCES given to target: drivers__gpio
Call Stack (most recent call first):
../../../cmake/extensions.cmake:355 (zephyr_library_named)
../../../drivers/gpio/CMakeLists.txt:3 (zephyr_library)
Remove TEST_USERSPACE workaround added in commit 3b53e69249 which
added gpio_handlers.c to the SOURCES.
Fixes#15232.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Mariusz Skamra