The transport segmented TX nack and seg_pending fields must be at least
6 bits to avoid overflow for 32 segment messages. This change rearranges
the seg_tx fields to gather all state flag fields in one byte, while
making the counter fields whole bytes.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fix missing transmit buffer demutiplexing before checking if
slave latency needs to be maintained or cancelled.
This bug was detected when new transmit buffer was enqueued
overlapping with on-air radio transmission of empty PDU
preceding the handling of radio event done.
Symptoms of this bug being data transmission latency of upto
slave latency plus one times connection interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Increases the transport segmentented tx seg_o counter to 6 bits to avoid
overflow when sending 32 segments. The check in the send loop would
previously never be false, which causes segments to repeat
unnecessarily.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fixes bug where the transport segmented tx would decrement the attempt
counter every time it ran out of buffers. If transport ran out of
buffers 4 times before the sending could complete, the transfer would
end prematurely.
Moves the attempt decrement to only execute when all segments have been
sent.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Ensures that friend messages are enqueued, even if the packet is
received with an appkey is unknown to the friend. Previously, sdu_recv
would return EINVAL if the appkey was unknown, which would prevent the
lower transport layer from adding the packet to the friend queue. This
is irrelevant for the logic in lower transport, and should not be
returned as an error.
Fixes#24014.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
If LE Read PHY fails the code was still trying to parse the buffer as a
valid response.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix extended advertiser not using correct set random address command
to set private (NRPA) address when privacy feature has been disabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix Service Changed configuration stored in flash not deleted in flash
when calling bt_gatt_clear from bt_unpair.
When clearing the check for "is bonded" should not be made. If the
bond information is already removed this check will fail.
When clearing the check for "modified" should not be made, clearing
is in itself a modification, and should always be made.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix CCC cfg not cleared when overwriting oldest bond. Calling
bt_unpair with a pointer to the key will result in the key addr being
memset to zero and bt_gatt_clear is called with an zero-set address.
This happens because unpair (hci_core.c) calls bt_keys_clear before
calling bt_gatt_clear.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
get_phy is referenced by BT_EXT_ADV only when BT_OBSERVER is also
selected. Avoid defined-but-not-used warnings in that situation.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This commit adds support for bluetooth in nRF52820 SoC.
Bluetooth radio related files created and added to Zephyr.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
When using extended advertising the connection can be established on
different PHY. In order to have an updated value of the current PHY
we need to read the PHY of the connection in the connection complete
event.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add application control of initiating phy change procedure and it's
parameters.
The reasons for allowing the application control over the PHY:
- Allow changing to Coded PHY.
- Application may change PHY to react to changes in environment
to balance throughput and range.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add application control of initiating data length procedure and it's
parameters.
The reasons for allowing the application control over the data length:
- Bandwidth control adjusted based on number of active connections.
- Changing data length before switching to coded phy.
- Applying workarounds for interoperability problems.
- Controlling order of ATT MTU and data length procedures.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add Kconfig option so that the application can disable automatic
initiation of the data length procedure. This is symmetric with the
PHY auto initiation kconfig option.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor setting the maximum data length parameters supported on in
auto data length procedure. This makes setting the data length of the
connection a re-usable function.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
With BT_CTLR_USER_TICKER_ID_RANGE it is possible for vendors to add a
number of ticker nodes for proprietary purposes. The feature depends on
BT_CTLR_USER_EXT.
Signed-off-by: Morten Priess <mtpr@oticon.com>
The numbers should have been the sum of HCI commands count and ACL TX
buffers but instead the buffer size was used which makes the pool holds
substatially more buffer than necessary.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add control over the use name option to advertise shell parameters as
an optional argument.
The argument count for extended advertise parameters had not been
updated for the maximum directed advertise parameter count.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Implement the BT_LE_ADV_OPT_USE_NAME when using bt_le_ext_adv_* APIs
to start the advertiser.
When starting an extended connectable advertiser the name must be
included in the advertising data, since scan response data is
not allowed in this configuration.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove setting state flags in bt_le_adv_start_ext since they are set
by le_ext_adv_param_set, except for BT_ADV_PERSIST flag.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Only persist advertising when the bt_le_adv_start API is used to start
the advertiser. For multiple advertising set a connectable advertiser
can only be started if there is a connection object available for the
advertiser. Leave the decision on which advertising set should be
advertising up to the application instead of suspending advertising
when no connection object is available.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove the BT_LE_CONN_OPT_2M option and update documentation.
This was a misunderstand about the init PHY HCI parameter.
The init PHY in the extended connection create command does not
determine which PHYs are accepted as the initial PHY of the
connection. This is instead determined by the secondary PHY of the
extended advertiser.
The init PHY parameter only specifies which conn parameters are
provided, and since we only provide one conn parameter this option
has no effect.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The last parameter to hci_cmd_done() is expected to be a valid net_buf
since the function immediately tries to dereference it. Fix this by
passing the appropriate buffer reference to the function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds a new flag to track if the L2CAP channel is pending waiting
for encryption to be changed to resume connecting.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for ATT_MULTIPLE_HANDLE_VALUE_NTF,
ATT_READ_MULTIPLE_VARIABLE_REQ and ATT_READ_MULTIPLE_VARIABLE_RSP.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for EATT bearer which was introduced in 5.2, they work
as extra channels to have GATT traffic, at the moment it is completely
transparent to application when they are in use since the allocation
happens automatically.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the definitions for Enhanced ATT along with new PDUs and UUIDs
introduced in 5.2.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a callback to indicate when the stack has released all
references to a given channel so the owner free up any resources
associated with that.
This is requires since EATT channels cannot rely on the destroy callback
as it does not use a fixed channel like ATT.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This leaves only channels on the dynamic range to be offloaded to the
system queue so ATT and EATT handling are handling in the same context.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the initial implementation of ECRED mode which can connect up
to 5 channels simultaneously and is required by EATT.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces new Enhanced Credit Based Flow Control PDUs and related
definitions which were introduced in 5.2.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Split BT_CTLR_CONN_RSSI option into two, the base option enables the
Read RSSI command, while the new BT_CTLR_CONN_RSSI_EVENT enables the
connection RSSI events. There is no handling of RSSI events, only a
BT_INFO log.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The bluetooth subsystem is now fully compatible with the new timeout
API, so remove the selection of the legacy API.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert bluetooth mesh to using k_timeout struct. Many of the mesh
modules uses timeout calculations, so it is most practical to keep
the s32_t type and only initialize a k_timeout_t struct when
calling the kernel.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert bluetooth host to using k_timeout_struct for the timeout values.
This is mostly replacing s32_t with k_timeout_t.
In l2cap the handling of no timeout in send channel request was removed
since the timeout is both documented as minimum of 1 second and never
given any no timeout value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert bluetooth controller to using the new k_timeout_t API so that
CONFIG_LEGACY_TIMEOUT_API can be turned off.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove logging of individual threads spread out throughout the
bluetooth subsystem. The stacks can be analysed by enabling the
following options.
CONFIG_THREAD_ANALYZER=y
CONFIG_THREAD_ANALYZER_AUTO=y
CONFIG_THREAD_ANALYZER_RUN_UNLOCKED=y
Optional:
CONFIG_THREAD_NAME=y
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Include the RPA addresses in the enhanced connection complete debug
log. This makes it easier to debug privacy failures.
Use a new debug statement so that the debug print will work correctly
when log_strdup does not copy the string.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix local RPA field for the legacy controller. This failed without
compilation errors because of blind pointer cast between two
structs of similar definition.
Set the local RPA field of the enhanced connection complete event only
when the address was generated by the controller. If the host has
set an RPA and this one was used the controller should return all
zeroes.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the local RPA field of the enhanced connection complete event only
when the address was generated by the controller. If the host has
set an RPA and this one was used the controller should return all
zeroes.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Trond Einar Snekvik