The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I8f57a17f78e674aca5400f005db8975c9f9e150e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A subsequent patch will start reusing HCI command buffers for
receiving the response, so the distinction of received vs sent data
headroom would just make the code unnecessarily complex. Instead, just
merge these two variable into a single one.
Change-Id: I31d846331939f1a2270df7ed0c75112825e16493
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is mainly for backward compatibility with 1.0b devices and for
spec compliance. CFC is mandatory post 1.0b spec where in MSC FC
shall not be used.
FC bit in MSC is used to manage the flow control. If FC is 1 then
the device is unable to accept frames.
Implementation is done by reusing "tx_credit" as a binary semaphore
wherein it will be blocked if MSC is recieved with FC bit 1 and
unblocked if FC bit is 0. Once tx thread is scheduled then semaphore
should be always available until all the buf in queue is sent.
Change-Id: I91181668ec0f46ff0b02905dd97e4503fc1fa7a7
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is mainly for backward compatibility with 1.0b devices and for
ICS & spec compliance. CFC is mandatory post 1.0b spec where in
Aggregate FC shall not be used.
Aggregate FC is managed using FCOFF and FCON messages. This is for
the entire session which means that all the dlcs in that session
will be affected.
Implementation is done using binary semaphore wherein it will be
blocked when FCOFF is recieved and unblocked in FCON.
Once tx thread is scheduled then semaphore should be always available
until all the buf in queue is sent.
Change-Id: Ibfd2c4d033cef64c238ead83474f9e171572de1e
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
As per the spec, the station which disconnects the last dlc
should disconnect session also. In case if remote does not
do it we need to disconnect otherwise rfcomm will be connected
without any dlc. So this starts an idle timer to handle the
above scenario.
This also starts a disconnect timer to handle in case remote
does not respond to session disconnect request.
Change-Id: I3b45aa5bf4c35fd81dc10974f2b0b6d4cfe4ea7d
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Peer sends Remote Port Negotiation command to set port
communication settings. Currently we accept all the settings
sent by remote.
If there is only one value byte in the request then current
port settings has to be returned for which we returns the
default settings defined in ETSI.
Note that RPN may be sent even before a dlc is opened.
> ACL Data RX: Handle 256 flags 0x02 dlen 18
Channel: 64 len 14 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x03 cr 1 dlci 0x00
Control: 0xef poll/final 0
Length: 10
FCS: 0x70
MCC Message type: Remote Port Negotiation Command CMD (0x24)
Length: 8
dlci 10
br 3 db 2 sb 0 p 0 pt 0 xi 0 xo 0
rtri 0 rtro 0 rtci 0 rtco 0 xon 17 xoff 19
pm 0x3f7f
< ACL Data TX: Handle 256 flags 0x00 dlen 18
Channel: 64 len 14 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x01 cr 0 dlci 0x00
Control: 0xef poll/final 0
Length: 10
FCS: 0xaa
MCC Message type: Remote Port Negotiation Command RSP (0x24)
Length: 8
dlci 10
br 3 db 2 sb 0 p 0 pt 0 xi 0 xo 0
rtri 0 rtro 0 rtci 0 rtco 0 xon 17 xoff 19
pm 0x3f7f
Change-Id: I73b7d8577e7e2bc3e436f4db86a91e12db440f1f
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This will be used by the user to disconnect or cancel connect dlc.
This also defines an internal close function which will take
appropriate action based on the dlc state.
In case of user initiated disconnection if some pending packets are
there in queue then it has to be sent before sending DISC packet.
< ACL Data TX: Handle 256 flags 0x00 dlen 8
Channel: 64 len 4 [PSM 3 mode 0] {chan 0}
RFCOMM: Disconnect (DISC) (0x43)
Address: 0x2b cr 1 dlci 0x0a
Control: 0x53 poll/final 1
Length: 0
FCS: 0x6d
> ACL Data RX: Handle 256 flags 0x02 dlen 8
Channel: 64 len 4 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Ack (UA) (0x63)
Address: 0x29 cr 0 dlci 0x0a
Control: 0x73 poll/final 1
Length: 0
FCS: 0x26
Change-Id: Ie4fa3bd8f6b279fee6fb56ddce198d82c5047849
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This patch introduces the Connect API which initiates session
connection first. If session is already there with the peer
then it has to reuse it and initiate DLC (which will be done
in the subsequent patch) since there can be only one session
per device.
< ACL Data TX: Handle 256 flags 0x00 dlen 8
Channel: 64 len 4 [PSM 3 mode 0] {chan 0}
RFCOMM: Set Async Balance Mode (SABM) (0x2f)
Address: 0x03 cr 1 dlci 0x00
Control: 0x3f poll/final 1
Length: 0
FCS: 0x1c
> ACL Data RX: Handle 256 flags 0x02 dlen 8
Channel: 64 len 4 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Ack (UA) (0x63)
Address: 0x03 cr 1 dlci 0x00
Control: 0x73 poll/final 1
Length: 0
FCS: 0xd7
Change-Id: I9828e0f3b3ea43bb17df95f0536e15df86f1b4be
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This defines and clarifies PF bit macro for both UIH and
non UIH packets.
Change-Id: Ide7736c0fc8607708824766adbfccf1bd7bc48e9
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This replaces initiator flag of session and dlc to enum which has
two values INITIATOR and ACCEPTOR.
Also this defines macros for CRs in header. Basically there are
three types fo CRs. Frame header CR has different meaning for
UIH and non UIH packets. Also this renames the existing msg hdr
CR to make it consistent.
These changes are basically done to make it more readable
Change-Id: Ic15e93465b0afbd19d8805f27d7a43f34ef38689
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Move the Bluetooth host stack from net/bluetooth to
subsys/bluetooth/host. This is preparation for having both host and
controller under the same root, i.e. subsys/bluetooth/.
Change-Id: I3bc796f7e331fca0c485f3890d62b9c03e027b96
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Johan Hedberg