move uart.h to drivers/uart.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When mcumgr smp data was received over shell uart transport
it was not waking up shell thread and thus request was not
processed. Shell thread must be waken up on any incoming
data, even data which is only dedicated for mcumgr smp.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Adding possibility to modify shell prompt in Kconfig and in prj.config
file.
Fixes#14547.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Extended shell to be able to process logs in place
(in the context of a log call). In order to achieve that,
shell was extended to support for TX blocking operations. If
CONFIG_LOG_INPLACE_PROCESS is enabled then shell instance
attempts to be initialized in blocking TX mode. If fails to
do so, shell log backend is disabled. If successfully enabled
logs are processed and printed in the context of the call.
Due to that change, user may expirience interleaved output as
shell has no means to multiplex shell output with logger output.
In extreme, huge amount of log messages may prevent shell thread
execution and shell may become unresponsive.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added display text management to shell_fprintf function.
Now it can be used from diffrent threads with not risk that
displayed lines will overlay.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
If burst of log messages was passed to the shell log
backend, it was likely that messages were lost because
shell had no means to control arrivals of log messages.
Added log message enqueueing timeout to the shell instance
to allow blocking logger thread if short-term arrival rate
exceeded shell capabilities.
Added kconfig option for setting log message queue size
and timeout in RTT and UART instances. Added section in
shell documentation which explains interaction between
the logger and shell instance acting as a logger backend.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Removed Console dependencies from shell uart backend.
Generated define: CONFIG_UART_SHELL_ON_DEV_NAME for each board.
Fixes#10191
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Currently shell UART backend is interrupt driven if UART driver
is interrupt driven. That can be limitation if one instance
wants to use interrupts but shell UART should not.
Added option to shell uart to be able to control use of
interrupts. By default interrupts are enabled if driver
supports it.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Each shell thread will have unique name.
Previously thread name "shell" has been created for each shell
backend.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
RTT and uart shell backends were started with fixed
log limit set to INF. Configuration has been moved
to Kconfig allowing certain level or default LOG_MAX_LEVEL.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Scenario where RX ring buffer is full and cannot accept
more data was not handled. In that case byte should be
dropped. Such situation may occur when long command is
pasted (exceeding ring buffer size).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Improved RX path to use ring buffer for incoming data instead of single
byte buffer. Improved TX path to use ring buffer. Added support for
asynchronous UART API (interrupts).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added dummy backend which can be enabled with Kconfig. By default it is
disabled because it needs the same amount of memory as other phisical
backends. It shall be use only for commands testing purposes.
Improved shell_execute_cmd function, now it clears command context
before new command will be executed.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
If user will enable shell than for each backend shell instance
will be created automatically.
Update all shell examples according to the new initialization
procedure.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
New shell support features like:
- multi-instance
- command tree
- static and dynamic commands
- multiline
- help print function
- smart tab (autocompletion)
- meta-keys
- history, wildcards etc.
- generic transport (initially, uart present)
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Anas Nashif