Some files cleanup was overlooked when STM32 clock_control
was re-factored in #16486.
Fix this by removing the now superfluous files.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
stm32mp1 was adding a STM32 specific Core selection Kconfig
symbol while zephyr generic CPU_CORTEX_M4 could be used for the
same purpose.
Remove STM32 specific symbol and use generic one.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Get spi hci driver to define its own rx thread, in order
not to mix with bt own RX thread as driver use bt_recv_prio
that expect to be used in a different thread than BT host one.
Fixes#15714
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add new option --report-excluded to list all those tests with bad
filtering that never build or run. This option produces accurate results
with --all but can be used with default sanitycheck options to see what
does not run/build in CI for example. (limited coverage).
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Check the CONFIG_BUILD_OUTPUT_HEX and CONFIG_BUILD_OUTPUT_BIN options
are enabled before attempting to build signed versions of these formats.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Add more error handling and warnings. Doing this nicely requires a bit
of re-work to the control flow.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
When signing binaries from multiple build directories, it is
inconvenient to have to specify the output file locations by hand each
time. It's also a little weird that they're not next to zephyr.bin and
zephyr.hex.
Move them to the build directory, next to their unsigned variants.
Suggested by Piotr Mienkowski.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Let's leave self.args as the actual parsed argument namespace.
Pass the final computed build directory separately.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This got broken in the patches which added the build.dir-fmt config
option when BUiLD_DIR_DESCRIPTION was renamed.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Clean up the code a bit:
- Simplify the loops over the flash 'reg' properties by using range()
- Build identifier names with a plain .format() where possible. This
makes them stand out better in the code.
- Remove redundant variables
- Move variables close to where they're used
- Misc. other minor improvements
generated_dts_board.conf and generated_dts_board_unfixed.h were verified
to be identical for disco_l475_iot1 and frdm_kw41z before and after the
cleanup.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
* Fix white space in phy.yaml
* Fix property name in st,stm32-usbphyc.yaml and usb-nop-xceiv.yaml to
use "#phy-cells" and not "phy-cells"
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce uint8-array type for local-mac-address as we need to
distinguish it from 'array' meaning a uint32 array.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
DT_ALIAS_<ALIAS>_<PROP> defines are a convenient and portable way to get
the device instance name despite different naming conventions used by
the device drivers.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The driver was using a mix of instance defines and alias, move to just
using the alias defines so its consistent.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This API had several issues:
- The parameter types and order were inconsistent with e.g.
bt_le_adv_start()
- There were no real users of num_params, which just caused increased
code size and memory consumption for no good reason.
- The error handling policy was arbitrary: if one of the
notifications would fail it would be impossible for the caller to
know if some notifications succeeded, i.e. at what point the
failure happened. Some callers might also want to make note of the
failure but continue trying to notify for the remaining parameters.
The first issue is easily fixable, but because of the other two I
think it's best we don't have this code as part of the stack, rather
require whoever needs it to do the for loop themselves. It's just a
few lines of code, so the benefit of having this in the stack was
anyway quite minimal.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The DT spec. only has "okay" and not "ok". The Linux kernel has around
12k "okay"s and 300 "ok"s.
The scripts/dts scripts only check for "disabled", so should be safe re.
those at least.
The replacement was done with
git ls-files | xargs sed -i 's/status\s*=\s*"ok"/status = "okay"/'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
* Rename stringlist to string-array to be closer inline with upstream
dtschema definitions.
* Add string-array to the device_node.yaml.template
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This option uses a lot of typing, so point out there's a way to save
keystrokes using -C.
Tweak the language around the target toolchain.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Make it clearer that the note about setting QEMU_BIN_PATH only applies
if you've got the Zephyr SDK installed.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
There are a few different places where alternatives for setting
environment variables are described. None of them is 100% complete, so
the results are likely to be confusing.
Make a single page on setting environment variables, how the zephyrrc
files work, how the zephyr-env scripts work, and some of the important
environment variables, with appropriate references elsewhere. (This is
inspired by the Arch wiki's excellent page on installing programs.)
Link to it from the getting started and application development pages
instead of repeating the information. This has the benefit of
shortening the getting started guide a bit more.
Add some concrete advice on checking the toolchain environment
variables in particular. This is a stumbling block for beginners.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Updates based on discussion and changes in supported features.
- Make the guide shorter by removing content that's not relevant to
most users who are truly just getting started, such as information
about pre-LTS versions that did not support west, and by being more
concise in some places.
- Decrease the number of colored boxes. At the latest TSC F2F, the
"note / warning / note / tip" contents were identified as a
readability problem.
- Add additional information based on new west features, like "west
boards".
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
We not analysing coverage data at all in CI right now. Disable this
while we figure out a better solution for reporting data.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Its possible that the <INSTANCE> number could conflict with the register
number. This is shown to happen for a device like soc-nv-flash at
address 0.
So change naming convention to DT_INST_<INSTANCE>_<COMPAT>_<PROP> and
make DT_<COMPAT>_<INSTANCE>_<PROP> as deprecated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
k_sem_give shall only be used if no callback has been set otherwise
k_sem_take was not called which can break the flow control.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The only we support cores that don't have CMOV insns are the MINUTEIAs,
so we simply check for that rather this using a layer of indirection.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This option is set iff CONFIG_X86 is set, thus it provides no useful
information. Remove the option and replace references with CONFIG_X86.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The k_stack data type cannot be u32_t on a 64-bit system as it is
often used to store pointers. Let's define a dedicated type for stack
data values, namely stack_data_t, which can be adjusted accordingly.
For now it is defined to uintptr_t which is the integer type large
enough to hold a pointer, meaning it is equivalent to u32_t on 32-bit
systems and u64_t on 64-bit systems.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Sample was not compiling for nordic boards because RTC_0
instance was not enabled by default and RTC_0 device is using
different DT define.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Detection of missing log_strdup call was applied to every message
while it applies only to standard messages (string + arguments).
Appling it to hexdump messages could lead to fault as seen on
nrf9160_pca10090ns board.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The macro obtains the toolchain specific flag and value for
setting of the requested c standard.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
Initialize the net_pkt cursor to begining after net_pkt_write.
Without which recv_cb can't peek/get net_pkt
Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
We need to be able to force certain versions based on the branch and
code base being used. For example for 1.14 we will need to apply some
fixes or revert some commits that may only apply to master.
Next step is also adding this to 1.14 branch and use a working commit.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To avoid and minimize conflicts when items are always added to the
bottom of the list, order things alphabetically.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Krzysztof Chruscinski