It is not needed to protect static table of handlers, with mutex,
as there is no possibility that there will be anything added to the
table at runtime.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The contentes of the function has been reduced with use of
sys_slist_append instead of sys_slist_insert.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Encoding of values with use of base64 has been marked as deprecated and
will be removed in future releases.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Backend initialization code has been moved from common settings_init.c
to proper backend source files. Missing static specifiers have been
added.
Minor cleanup has been done to source files: exported functions have
been moved to the end of source files and definitions of static
variables, that are used by only a single function, have been moved from
global scope into functions that use them.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Assuming that fs_seek has been successful; in case when fs_write
would be unsuccessful and fs_close, that follows, would be successful,
the success code would have been returned for the entire procedure,
although it has failed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This commit fixes the settings_call_set_handler function
in a situation where the user calls settings_load_subtree_direct
with NULL as a subtree parameter.
Fixes: #20514
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
In settings write NVS errors were not handled
in a few places.
This patch improve that.
fixes#20515
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The length passed to settings_runtime_set was not taken into account
in the read callback. This commit fixes it.
Signed-off-by: François Delawarde <fnde@oticon.com>
ssize_t type variable was compared to size_t type variable which will
cause error for comparison while ssize_t value will be nagative.
This patch fixes that.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
NVS back-end initialization should fetch size of the flash erase blocks
from the flash API instead of DT. This allows to work well when used
storage partition is not located in embedded memory.
NVS back-end sector multiplier configuration was set to 8K as
DT value for native posix targets
flash sector sizes is 1 B, while its flash driver supports 8k.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This commit adds a possibility to activate duplicates filtering
during direct loading.
JIRA: NCSDK-3017
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
This commit adds a possibility to activate duplicates filtering
during direct loading.
JIRA: NCSDK-3017
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Kconfig does not set SETTINGS_NONE as default backend (meaning no
backend) because SETTINGS_NONE is optional. There is no difference
between SETTINGS_NONE and SETTINGS_CUSTOM. By removing the optional line
SETTINGS_NONE is selected as default, to use a custom backend
SETTINGS_CUSTOM=y must be set.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
This commit implements generic function to decide
witch functions to call for selected value name with given
loading parameters.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
This commit allows loading data from settings permanent storage
directly to the given callback function.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Switch form using privater FCB error codes to
errno codes. FCB private codes convention were compatible
with <errno.h> codes:
- 0 mean success
- negative values mean errors
- similar error types.
There was no sense to kept private FCB error codes.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
if base64_decode function returns error, function can't continue
otherwise a fatal error will cause the thread to spin, putting the
system into an unrecoverable state
Signed-off-by: Faisal Saleem <faisal.saleem@setec.com.au>
Fix for Zephyr bug #17415
For settings_line_val_read function with following .conf setting:
CONFIG_SETTINGS_USE_BASE64=y
Signed-off-by: Declan Traill <declan.traill@setec.com.au>
The callback might return more than length of data read.
It should return nothing more than read length requested.
Patch fixes this behavior.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Apparently, settings were relying on other headers
including kernel.h, once that include got removed from the
logger header samples fail to compile.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If the flash device is not configured, return an error rather than
dereferencing a null device pointer.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
move base64.h to sys/base64.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move fcb.h to fs/fcb.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move fs.h to fs/fs.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add the possibility to register handles to ROM using a new macro
SETTINGS_REGISTER_STATIC(handler), the handler is of type
settings_handler_stat and has to be declared as const:
```
const struct settings_handler_stat test_handler = {
.name = "test", /* this can also be "ps/data"
.h_get = get,
.h_set = set,
.h_commit = NULL, /* NULL defines can be ommited */
.h_export = NULL /* NULL defines can be ommited */
};
SETTINGS_REGISTER_STATIC(test_handler);
```
To maintain support for handlers stored in RAM (dynamic handlers)
`CONFIG_SETTINGS_DYNAMIC_HANDLERS`must be enabled, which is by default.
When registering static handlers there is no check if this handler has
been registered earlier, the latest registered static handler will be
considered valid for any set/get routine, while the commit and export
routines will be executed for both registered handlers.
When a dynamic handler is registered a check is done to see if there was
an earlier registration of the name as a static or dynamic handler
registration will fail.
To get to the lowest possible RAM usage it is advised to set
`CONFIG_SETTINGS_DYNAMIC_HANDLERS=n`.
Updates:
a. Changed usage of RAM to DYNAMIC/dynamic, ROM to STATIC/static
b. Updated settings.h to remove added #if defined()
c. Make static handlers always enabled
d. Corrected error introduced in common-rom.ld.
e. Changed return value of settings_parse_and_lookup to
settings_handler_stat type to reduce stack usage.
f. Updated the name generated to store a handler item in ROM. It now
uses the name used to register in combination with the line where
SETTINGS_REGISTER_STATIC() is called.
g. renamed settings_handler_stat type to settings_handler_static
h. renamed SETTINGS_REGISTER_STATIC to SETTINGS_STATIC_HANDLER_DEFINE()
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The settings module processes the variable name by splitting it up in
a set of variables. This PR removes the splitting up and keeps the
variable name as one string.
It is an alternative to #16609
The possibility is introduced to register handler including a
separator, or to register a handler for each variable.
The ability is introduced to load a subtree from flash or even to load
a single item.
Two ways to operate on variable and settings_handler names are provided:
settings_name_steq(const char *name, const char *key, const char **next)
which checks if name starts with key, returns 1/0 if it does/does not
the remaining part of name is in next.
settings_name_split(const char *name, char *argv, const char **next)
which splits up name in a part before "/"" that is found in argv and
the remaining part that is in next.
A mutex is added to make settings thread-safe
The settings_handlers list is stored in reverse alphabetical order, this
allows registration of e.g. bt and bt/mesh in separate handlers, the bt
handler itself should not contain any handling of bt/mesh.
A settings_deregister() method is added. Settings_handlers can now be
added/removed when required. This saves RAM when settings_handlers are
not needed.
Tests have been updated to reflect changes in the settings api.
Updates after meeting:
1. Removed settings_deregister
2. Changed settings_name_split() in settings_name_next:
int settings_name_next(const char *name, const char **next): returns
the number of characters before the first separator. This can then be
used to read the correct number of characters from name using strncpy
for processing.
3. New functional test added
Update in settings.h: settings_name_next() changed position -> index
Added some comments in settings.h (settings_name_steq())
Updated tests to reflect change to settings_name_next() and pointer
value comparison. The functional test can now also run on qemu_x86.
Corrected some documentation in header.
Changed registration of handlers to be non ordered.
Changed handler lookup to handle non ordered list of handlers, this
improves handler matching in case different length names are compared
and also makes it easier to add rom based handlers as they will not be
ordered.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
This commit removes redundant checks if the module
was already initialized.
The variable to mark the fact of initialization is
moved as a global module variable.
This allows creating more sophisticated unit tests
of the settings subsystem by giving a possibility to modify
the internal mark of the fact the system was initialized.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Major changes are:
- Expose settings backend API to enable custom backend support.
- Add a new CONFIG_SETTINGS_CUSTOM backend to allow registering a custom
backend.
- Change api of the handlers h_set() routines to allow for
backend-specific read callbacks.
- Provide a customizable settings_backend_init() routine for custom
backends.
- Move runtime settings support to be its own backend.
Signed-off-by: François Delawarde <fnde@oticon.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The code for checking duplicates in the existing settings store was
incorrectly identifying a new value with the same initial content but
shorter length as a duplicate. Fix this by doing an early check on a
new vs old length mismatch, and immediately flag this as not a
duplicate.
Fixes#14840
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enforce that NULL value is never given with a non-zero length. This
way we don't need to check this over and over again further down the
call path.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Patch removes dead, replaced code which was accidentally not
removed within the stream-codec PR #9521.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
In case of corrupted key in settings, error message is shown. However,
the key name is lost by logger if it is not explicitly copied.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
Dominik Ermel