Enable extended advertising commands in the shell and enable the
runtime check of feature support in the controller.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Instead of using its own buffer pool use one already available by
HCI_RAW which are accessible with bt_buf_tx_get.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch adjusts L2CAP CoC related command and responses to the
recent BTP API changes.
BTP has been extended with Enhanced CoC support, thus few L2CAP
CoC related commands have been changed.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This enables BT_EATT for shell samples so it can be build test by CI and
gives user the ability of test it using shell commands.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Update EDTT default configuration to make it easier to debug. The
use of maximum log level to restrict default output caused some
confusion. Instead remove debug options to reduce the default log
output. Enabling debug logs is now similar to other samples and tests.
Remove options commented out, no need to keep them.
Move comment to the matching CONFIG.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The board target for emulation of nRF52810 on nRF5DK, so far
known as nrf52810_pca10040, is renamed to nrf52dk_nrf52810.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The net_buf subsystem is now fully compatible with the new timeout
API, so move the selection of the legacy API to those specific
subsystems that use net_buf and still need converting.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add additional build configurations to the shell to catch build errors
when enabling extended advertising.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Deprecate BT_LE_ADV defines in hci.h that are expected to be used by the
application in the scan received callback to identify the advertising
PDU type. These defines are mixing HCI input parameters and advertising
PDU types. Internally it is acceptable to mix these, but at the API we
should to mix in them.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Deprecate bt_create_conn_le and rename it to in order to add return
code, new arguments and to follow the established naming convention.
Add API for the application to control the scan parameters of the
initiator role. This allows the application more scheduling control
of the initiator in multi-role scenarios. Also provides options to
configure the initiator for LE Coded PHY for long range support.
We deprecate the old way of creating connection to make the name more
consistent with the rest of the API.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Allocates segmented message buffers as slabs in a common pool for RX and
TX. This reduces memory requirements for both TX and RX, as TX messages
can be stored without the network and advertising buffer overhead, and
RX can use only the slabs it needs, instead of allocating a full size
segmented message. This approach also removes the need for decrypting
the segments for each retransmission, reducing overall processing load.
Slab based segmentation for tx also introduces queuing of segmented
messages, which allows the application layer to send multiple messages
to the same destination without violating Bluetooth Mesh specification
v1.0.1, section 3.6.4.1. This mechanism is provided through a flag that
blocks segmented messages to a destination which a message is already
being sent to until the previous message finishes.
This changes the SDU size configuration to a symmetrical
RX_SEG_MAX/TX_SEG_MAX pair of configurations, plus a new segment pool
side configuration. It also removes the binding between the TX_SEG_MAX
config and the advertising buffers, reducing the minimum advertising
buffer count from 6 to 3.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The service registration logic was using the wrong variable to check for
a pending service to be registered, which led to the same service being
registered twice in some cases. Fix the logic so that a pending service
is only registered once.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add missing dependency in mesh.conf.
Handles this warning: Warning: BT_MESH_SHELL was assigned the value 'y'
but got the value 'n'. Check these unsatisfied dependencies:
BT_MESH_HEALTH_CLI (=n)
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove CONFIG_CONSOLE_HANDLER from project configuration. When building
for native_posix this produces the following warning:
warning: CONSOLE_HANDLER was assigned the value 'y' but gotthe value 'n'
Check these unsatisfied dependencies: SERIAL_SUPPORT_INTERRUPT (=n)
The shell works without this option since this is handled by the shell
itself instead.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Since we enable CONFIG_ASSERT in the tester app, the logging subsystem
will assert if it detects a missing log_strdup. Add the two missing ones
that I could find to properly log transient strings.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implement the BTP command to set MITM, although on Zephyr this is not
configurable at runtime. Instead print a warning instructing to use the
CONFIG_BT_SMP_ENFORCE_MITM Kconfig option instead.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implement the BTP GAP command and event for passkey confirmation.
This also allows us to set the passkey_confirm auth callback which
enables the keyboard/display IO capabilities.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since some tests require MITM to be off, disable the option that forces
the MITM flag at all times.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Disable stack measurements by default, since they pollute the log
output.
Ensure that the logging thread has enough stack.
Ensure that the UART that connects to the BTP client is
interrupt-driven.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a configuration file for the nRF52840 DK so that it uses RTT for
debugging and enables more protection measures.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
- Use the built-in mechanism for configuration overlays
(having a boards/ folder with <board>.conf fragments)
- Clean up variables that were giving warnings
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Encode all types of EDTT command response with similar structure to how
it is generated from command complete when it is generated from the
command status.
This structure will be:
2 byte EDTT command response code
2 byte EDTT length field
1 byte HCI status
N bytes of command output parameters
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Enable tests that was disabled due to test failure. Test have been
updated and are now passing.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This makes simulate command advertise with proper UUID so the likes of
central_hr can connect to it when simulating:
hrs simulate on
Registering HRS Service
Connected: 00:aa:01:01:00:24 (public)
Start HRS simulation
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add privacy configuration when using the split controller for the test
basic_conn_encrypt. The handling with or without controller based
privacy affects the RPA handling in the host due to different
connection complete events being used. This affects the overall pairing
procedure as the addresses are inputs to the pairing functions.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use the new API and replace the enable/disable callback calls with pin
interrupt configuration instead.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Joakim Andersson