CI always runs after new PRs are merged into master. Report failures to
mailing list to get more attention if master fails to build.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use latest docker image with renode and an update to the SDK pre-release
0.10.0-rc3 (not used by default).
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to be able to merge the topic branch, we require a few
fixes to CI.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
After some discussion, we've decided to ensure that shippable runs
with the latest west bootstrapper on PyPI by making that happen in
.shippable.yml for now, rather than updating our CI container.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Added a missing option in run_ci.sh to control the placement of the
xml results file. (Before it was just propagated thru the enviroment)
+
Changed .shippable to use this option when callign it.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
- Has cmake 3.8.2 that matches min. required version
- Has west pre-installed
- Uses latest python dependencies from scripts/requirements.txt
- remove ISSM toolchain
- added scancode-toolkit for scanning licenses and copyrights.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Compile and run the tests avaliable in bsim_bt
and collect the coverage results into the coverage report.
Also, detect if bsim's component folder already contains the
nRF52 HW models, and if it does instead of trying to fetch
them again (which will fail) check that the right versio is
present. This should ease testing locally.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
move CI scripting to a dedicated script. For example, to simulate what
is run in CI when a pull request is submitted:
./scripts/ci/run_ci.sh -b master -r upstream -p
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the docker image which has BabbleSim precompiled
Fetch the NRF52 hardware models required by the nrf52_bsim board
and compile them.
Collect the coverage report from the nrf52_bsim board
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
CI is failing sporadically with a corrupted
ToolchainCapabilityDatabase.cmake file.
To gain insight into how the file is corrupted we print it to the log.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Ninja is much faster than make in the context of CI. The issues with
ninja and parallel builds has been partially resolved in sanitycheck.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Disable cache which increases total execution time without any visible
benefits in the current setup. Need to revisit how we can better use
ccache for CI builds.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Go back to 5 minions, 7 minions is increasing the queue significantly
without any improvements visible in total execution time.
This was changed to 7 to address PRs changing many boards and tests,
which is the exception and not the rule.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since builds have drastically increased in time, we end up timing out CI
if we have a larger number of tests to build. Try bumping up the number
of slaves to 7 and see if that helps.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that the native_posix board is not built by default
with coverage, and that sanitycheck has an option to set it to,
let's explicitly tell sanitycheck to build unit tests and
for the native_board with coverage enabled.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Tests and samples are not part of the Zephyr code and should not
contribute to the final coverage reports. This will allow us to get
exact numbers about what is being covered or not in CI without the need
to go and look into files individually.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
ext/ code is not always entirely used or tested from Zephyr, we use only
subset of the features and available code. To get accurate coverage
data, exclude the files in ext/ from the coverage report.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Clear the toolchain capability cache when ccache is cleared so that
the different host-side caching mechanisms have a similair lifetime.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This will allow us to run sanitycheck on real devices and get reporting
out of it the same way we do that with Qemu.
To use this, run sanitycheck with the following new options:
scripts/sanitycheck --device-testing --device-serial /dev/ttyACM0 -p
frdm_k64f -T tests/crypto/
--device-serial denotes the serial device the board is connected to.
This needs to be accessible by the user running sanitycheck. You can
run this on one board only at a time, the board is specified using the
--platform option.
This was tested with only a few boards, some board will not work
because how they reset the serial device during flashing.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To try and improve CI builds related to pull requests lets bump up the
number of build slaves to 5 to increase throughput.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We want to support other toolchain not based on GCC, so the variable is
confusing, use ZEPHYR_TOOLCHAIN_VARIANT instead.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It is important that it is easy to reproduce CI issues locally. Using
the same sanitycheck options locally and in CI helps in this
regard. Specifically, Ninja and Make can produce different results and
therefore the default generator should be the same for sanitycheck and
shippable.
This patch makes four changes:
The sanitycheck option '--make' is introduced to allow specifying Make
as a generator.
CI no longer passes the option '--ninja' to sanitycheck.
Sanitycheck defaults to using Ninja.
Sanitycheck documents the --ninja option as deprecated.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Anas Nashif