Convert fiber_start to k_thread_spawn and nano_fiber_fifo_put to
k_fifo_put.
Change-Id: If1ec405ec602e28a538f4c9569ede87519346559
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use defines from k_fifo intead of legacy API.
Change-Id: Ib8cf0d88240ef145da550b8cf83d2580e7140521
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Only net_receive() is using non-special value for net_buf_get_timeout
so this change is included here. Other users are using special values
which are already correctly handling ticks vs ms change.
Change-Id: Ib12d34ac5a546b36fa7b35615f082c82a256bd07
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use new sleep API or remove sleeps where not needed.
Change-Id: I88c0973e57eb4970b68b3f4fa428683191b1a7f0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This can be used to initiate an outgoing connection
Syntax:
>br-rfcomm-connect <channel>
Change-Id: I7ac7aeb61e7ae7e3f55c7cd7e815bdb604b27fb3
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Restructure the Bluetooth options more logically.
- Both host and controller are now behind the same high level
CONFIG_BLUETOOTH.
- Selecting controller support disables other HCI driver selection, so
the controller isn't in the same list as HCI drivers any more.
- Under the top-level there's a "Custom stack" option, which when
enabled opens up the option of choosing CONFIG_NBLE.
There are various other cleanups and simplifications in this patch as
well, since splitting these up would have been fairly tricky while
making sure all test cases still build.
Change-Id: I5bb715cb9d20201cb8b72fbd149c8a09a4b2d7d2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add Low Power States support to the power shim layer
and show the usage in the quark_se sample.
States are defined as follow:
- SYS_POWER_STATE_CPU_LPS: SS2 with LPSS enabled
- SYS_POWER_STATE_CPU_LPS_1: SS2 with LPSS disabled
- SYS_POWER_STATE_CPU_LPS_2: SS1 with LPSS disabled
Jira: ZEP-994
Change-Id: Ie4b93f6e539cb53fc035be00280b66b2cb0d9fea
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Leave the aon counter in running state after the test.
Arduino 101 loader assumes the counter is running.
Stopping the counter will cause the next app to
not start without a hard reset or power cycle.
Jira: ZEP-961
Change-Id: Ia88f0c642b1df8dc5e2b1ee6c55ff0618b6127d0
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Debug setting is using another mdef file that was no changed by
commit 5b1b2d6123
Change-Id: I406b45e37a112352c88629cf7d494c70784930aa
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Otherwise, local settings in the account will cause headache and
randomly alter the result of the testcase.
Change-Id: I758966a7fe9335a13ce237aea7d6df2ddc5733ce
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Reorganize the code tree so no forward declarations are needed
(basically, move main() to the bottom).
Retag as not build only so it can be run on Quark*
Convert to actually verify counter readouts are increasing /
decreasing over busy empty loops and the alarm is being called.
Change-Id: I746efe595b8d1ac4471dccc2e87f8b36f5cc8ebe
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
sanitycheck already sets this and we need to allow deprecation
warnings.
Change-Id: I3d6bf652403bcbdba47663c8cd0d17682a8a842d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add an Arduino 101-specific configuration that enables flash-based
storage support as well as the file system shell.
Change-Id: Ic10ea958dd2446df4942a8dfd3cce1e3368852b2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Implement a new "clear" command to exercise the bt_storage API. The
command can either take an address parameter to clear storage for a
specific device, or, if called with the parameter "all", to clear the
entire storage.
Jira: ZEP-181
Change-Id: I1ebd17033f2062951abeeb7d7c448a34a3672577
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch removes "FAT" from files names, config names and
symbol names so as to avoid confusion, when other modules use
them in a more generic way.
Also flash_disk_access.c and ram_disk_access.c now exports generic
disk_access symbols as defined in include/disk_access.h rather
than FAT specific ones in fs/fat_diskio.h. Thus modules like
USB which need to use disk_access interface is not dependent
on symbols from ELMChan FAT module. Also fat_diskio.h
is removed.
Further the shim between ELM chan and Zephyr is modified as
per these changes.
Change-Id: Ifd80f14a629e467ee9c7a9aaff8a4896eed11982
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
This TC cover dma transfer with different channel and burst length
It support 2 ways to execute
*) full-auto: by default, it run all sub test cases defined in array
once flashing done and reset.
*) interactive: when CONFIG_CONFIG_CONSOLE_HANDLER_SHELL=y, it go into
shell first, user can input test command one by one for debugging.
move original test under drivers/dma to test_loop_transfer/
Change-Id: I7e78b730592c80bf2c23b20c8b0eb65a9b353acd
Signed-off-by: jing wang <jing.j.wang@intel.com>
The main task uses stack-hungry() printf(), and the switch to the unified
kernel pushed the necessary space over the edge.
Change-Id: I7b64e7f09d91c5050ffe7fb18506ff24289169fc
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For systems that have both high base (CPU, bus, etc.) frequency and
small divider of the base frequency for system clock and this way,
do not allow 1 second period for the system clock, set the system
clock period to 0.1.
Change-Id: Iafb4604112d4adb8430f8bf57a5a31de3f6cf91d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Since the mutex can not be unlocked if it is not locked, fix the test
and make sure that it unlocks the timer exactly same times as it locked
it before.
Change-Id: Ie29d308b789ed00f4fd3cf2faef3aa1f4bc89e3e
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The SPI_0_CS_GPIO and SPI_0_CS_GPIO_PIN values were defaulting to
something not very usable, because of which e.g. the file system
test app was having to explicitly set the right values in its sample
configuration. Having a proper defaults in the board defconfig means
this isn't needed anymore.
Change-Id: I1399914451c1616588322e25304d40d3dd1151e7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Test was not completing on CONFIG_DEBUG=y setting, current filter
sets custom stack size for such setting
Jira: ZEP-1203
Change-Id: I3a6ada88bc2e8a1fee757773c4b19b72551926a7
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
We the unified kernel now sizes have gone up and we have some more
testcases that are RAM limited on small memory systems.
Change-Id: I4716a779fac86a420607ba716edd012976d14254
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Commit 4187822d08 removed some filters
at sanitycheck script that were previously preventing foot print test
to run on board quark_d2000_crb.
Added filter excludes such board from min and reg footprint tests.
Change-Id: I2a32e34b1af6d16b3da418cd3113c52b2369eb97
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Making a reference to the common work queue code should not necessarily
drag in the system workqueue, since it is possible to use a workqueue
that is not the system workqueue. This is done by moving the system
workqueue into its own code module.
Moving the system workqueue to its own code module allows removing the
NANO_WORKQUEUE and SYSTEM_WORKQUEUE kconfig options, and compiling the
common workqueue code and system workqueue all the time. They are only
linked in the final image if a reference to them exist, same as the
other kernel modules.
Change-Id: I6f48d2542bda24f4702e7c2e317818dd082b3c11
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This increases number of available L2CAP channels for the test purposes.
This is needed for TC_COS_CFC_BV_05_C test case.
Change-Id: I5df099fb64632e1a0e557852ca55ee45a9cc89ed
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This fixes configuration file name in testcase.ini file.
Change-Id: I6496f98694415bfc3a76308aa9ee6dfd008e1691
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This updates README as well as makefile to choose Zephyr BLE firmware
configuration as a default one.
Closes: ZEP-1187
Change-Id: I78dec2a4e2b5bfe634a8b7b8897d4f6ab6b37b44
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds sample configuration file for tester application that
supports controllers with Zephyr-based BLE firmware.
Change-Id: I8b63f93d1395837b8485aba7060b6626be1daab1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The README files provided with the samples contain references to NBLE,
which is not a publicly supported solution for Bluetooth. Simply
remove these files. If the need arises to provide application-specific
information in the future we can add back per-application README
files.
Jira: ZEP-1183
Change-Id: I81b3ea5491d50fb16062ccd5a421ddc8fcb7ea42
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Test tests/kernel/test_xip does not fit FLASH region of new platform
cc3200_launchxl that was added by commit 10ea5d0, hence it must be
excluded from such test so daily sanitycheck script completes
successfully.
Jira: ZEP-1201
Change-Id: I01ec2b9af45e34934d91922bd749a83f305746b1
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
The test relies on the workq thread being in the system. It is possible
for the workq to not be in the system even if CONFIG_SYSTEM_WORKQUEUE is
enabled, if nothing makes references to the symbols in the object file,
so we cannot rely on the kconfig option to know if the system workq
thread is in the system or not. So, force it in.
Change-Id: I1ae2613fbd32928b673fc4c74a9dc56502255763
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Port the power management test app to use unified kernel.
Change-Id: I2f10748be5ca7d9792f6e97c35f5f2aabab769e7
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Johan Hedberg