This adds a CTS service sample which can be shared with application
samples.
Change-Id: I38889f71f6ce8fc7b784d0d04af6c97408e2d662
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a BAS service sample which can be shared with application
samples.
Change-Id: I1f484dadf63b41632992454a40edd91077bb78fa
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a DIS service sample which can be shared with application
samples.
Change-Id: I66f7a725139c8fa381275c3bda5e7c79fa3f09c8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a HRS service sample which can be shared with application
samples.
Change-Id: I1d2022ee7a6dfa46e2cae2d7c9d7924140d4fe37
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reduces the amount of duplicated code across sample applications.
Change-Id: I20cf2e9f948f1420f234a58beb7f72ad74696cf8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move re-enabling logic to the NBLE stack.
Change-Id: I1b895aa952a241dc41e2fc9faa2794a8c2c2d2db
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This moves both the Bluetooth HCI and NBLE drivers under
"Bluetooth Drivers" category. This also adds a selection for
choosing Bluetooth stacks as the bulk of both HCI and NBLE stacks
cannot be compiled together.
Note that this does not move the source files. That should be
done in a separate change.
Change-Id: I32fa7097ada0fdc52bcc745adb78c7273f4023c6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds support for building and testing peripheral_esp using NBLE
driver.
Change-Id: I962238d526101f8f423491d3023079684ec7d59f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a GAP service sample and make use of it in shell test which had
a copy of this code.
Change-Id: I5f03fb7db5349236e41bc30eb884c134136439e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If CONFIG_BLUETOOTH_GATT_DYNAMIC_DB is defined it shall be possible for
the application to register any extra service it needs.
Change-Id: I7186f3faf45e9295e0c8b32dce030099a142c500
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This moves IPSS sample code to samples/bluetooth/gatt which shall become
the default place for GATT related samples that can be reused.
Change-Id: I04089f6e43bfcc30ee1c7cc766620f19e3dad08e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Accourding to the spec the IP Support Service shall be instantiated as
a «Primary Service».
Change-Id: Ief0a2729c2752a33c8e7d4d9fae017c22e969e61
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds indication support for one characterist of the vendor service
so it can be used to test bt_gatt_indicate API.
Change-Id: Ief058c93caf3e30972eca920c050451f6120543b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure NETWORKING_WITH_6LOWPAN and 6LOWPAN_COMPRESSION_IPHC are
selected properly and update IPSP sample to only include the minimal
config options so it can test if this is working properly.
Change-Id: I2565cbd4f79d91eaba348d43933aa893c6dc6ace
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since the return value of these callbacks is a number of bytes ssize_t
is more appropriate than int.
Change-Id: I3406fb382975d62f51e7a195666d0ae88364fd2c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of manually creating bit shifts for individual bits use the
BIT() macro that exists for this purpose.
Change-Id: I599ecc16b3a2cffe8a355e19816c405e51937e91
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce BT_GATT_ERR macro to make it possible for application
callbacks to return exact ATT error codes.
Change-Id: I971536508e75036fbddc40b3f33e5201e11940bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This make it possible to include IPSP services in other samples.
Change-Id: If6eaecd8bab85a382b2da623b06603f6c98aef59
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Update the advertising data to advertise the Zephyr project web site.
Also provide references to the Eddystone specification.
Change-Id: Id9cfdf4d9be95bccab4152031479ab45f5b8a035
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This removes HR Control Point from Heart Rate Service Declaration.
This characterisitc is mandatory if the Energy Expended feature is
supported, otherwise excluded. Since we don't simulate Energy Expended
we shouldn't have this characterisitc in our service declaration.
Change-Id: Ibdfdb2dd48f28bd01763ee0a038faed08e30f84c
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
To exclude platform platform_exclude=foo should be used and not
platform_whitelist=!foo.
Change-Id: I4cddcd3b73e0bd8c42a0726776f8237ebd79a6ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The init, init_h5 and shell are not really samples but fit better in
the test category.
Change-Id: Id1a7ff31ad8767f858705bd952311cf64ff1f3f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
TinyCrypt provides implementation of AES CMAC so there is not need
for internal implementation in SMP code.
Change-Id: I15fe0daf8fca8c44b002636983b46502419c57a5
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Move all bluetooth testcases to tests/ and change Makefiles
accordingly where applicable.
Also fix Makefile to make some variables overridable and reduce
level of whitelisting in testcase.ini.
Change-Id: Ia71ee1fbbb238c45280b1e3c4747ca2f748f5263
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This allows to decrease number debug messages using config option.
Change-Id: I987d25c6d4b18503d6beb7feab97e9207100323d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This enables use of ECC from TinyCrypt. Since ECC is heavy this option
is separated from general use of TinyCrypt in SMP code.
Change-Id: Ia550e4a5f89240c8e15d2b5acccc21993b44b471
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This option is not needed as none of sample uses sys_rand32_get.
Change-Id: I00620a2fa7ea926d09e4e8f86cbf8ca7080478b3
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
sys_rand32_get appears to get stuck with same number for a while so
instead just increment the heart rate by 1 until 160 and then return it
back to 90.
Change-Id: I2aea870c68539271a1bb6190a958a7e2d1914dc3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Force restarting advertising until nble is able to handle this by
itself.
Change-Id: Ife811eb69a63b98b3b0380b80e403d5d9dc10f22
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a single option for enabling use of TinyCrypt library for
crypto. This option selects all required TinyCrypt options
depending on BT features enabled. Thanks to this applications
only need to select single option instead of set of required
TinyCrypt features.
Change-Id: I2862e9ad3e204635f2ed3199433982bcfb7112f6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to use pseudo random numbers generator provided by
tinycrypt instead of constant using of HCI LE Rand command.
HCI LE Rand commands are used only to initialize and re-seed PRNG.
Using tinycrypt for NRPA increase size of sample shell application
from 86852 to 89700 bytes.
Change-Id: I06e7392d087908caf37cd3ae648ea0bd5cc4ce61
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The handle shall be the characteristic value handle not the CCC.
Change-Id: I677ca12fdd59023f2498f712b060197a59baee64
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This can be used to focus on demonstrating a simple heartrate service.
Change-Id: Ib59c653ebe356784592c8468767b45c5240ec67a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add read parameters to read callabck
Merge bt_gatt_read_multiple functionality into bt_gatt_read.
This makes it easier for application to handle all types of reads
as same sematics is kept for them.
Instead of destroy callback, call read_func with NULL data to
indicated that read has completed. This makes it clear when
read is completed and parameters used for it are no longer needed.
Thanks to this application doesn't need to abuse user data destroy
callback for detecting if read has completed. Since destroy callback
is no longer needed it is removed.
Also note that bt_gatt_read doesn't take any user data parameter
and that destroy callback was acctually called with read parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_read_params.
Change-Id: I8d6ea136b1e61c1dae73cca868b53c48c45a5492
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
With NBLE driver it is not possible to register services before
bt_enable completes.
Change-Id: I71194150b807e183b0016accb600ae9538ba9b01
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This removes destroy callback for userdata as bt_gatt_subscribe
doesn't take any user data parameters and that destroy callback
was acctually called with subscribe parameters.
We assume subscription is active if bt_gatt_subscribe returned 0
(ie write command was sent). This is due to remote might be sending
notifications before reply to write.
Also note that bt_gatt_subscribe doesn't take any user data parameters
and that destroy callback was acctually called with subscribe
parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_subscribe_params.
Change-Id: I58ac9cd481ffa08ccc2d7a0464ca75f61fb280c5
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This enables sanitycheck to build for Arduino Due.
Note that there is no on-board bluetooth so bluetooth tests
are skipped.
Change-Id: I4f564e68ec65f01b7b33a32f6d0d7749290c0e5b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of destroy callback, call discovery_func with NULL attribute to
indicated that discovery has completed. This makes it clear when
discovery is completed and parameters used for it are no longer used.
Thanks to this application doesn't need to abuse user data destroy
callback for detecting if discovery has completed.
Also note that bt_gatt_discover doesn't take any user data parameter
and that destroy callback was acctually called with discovery
parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_discover_params.
Change-Id: Iec4eb9795975ef2555502e13a682e13ff37742e0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
struct bt_uuid is a 'tentative' UUID type and shouldn't be used for
UUID storage. Since tester application doens't know type of UUID
on compile time we need to have a common extra type that would
allow to store both 16 and 128 UUIDs.
Change-Id: Ia2775a457a732cf03ba7e4a59e6d654fcd1ab05d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
In anticipation of supporting a local static random address in the
future it makes more sense to call BT_LE_ADV_ADDR_PUBLIC
BT_LE_ADV_ADDR_IDENTITY.
Change-Id: I4826f1dfb50b54e13a35cbe7ee74e28641c81ad1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enable CONFIG_CONSOLE_HANDLER and disable CONFIG_UART_CONSOLE since
tester reuses that UART.
Change-Id: Ia440d75f66d01f29d10b5d6a68fc052fd8b57fa7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enabling BLUETOOTH_DEBUG enables also serial console conflicting with
tester reusing the same UART.
Change-Id: I8058a019e61146ff05cc44ab543cf6ec9ff418ef
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Johan Hedberg