Makefile.ipstack is more generic to net applications which
communicate through slip or between two qemus. So net apps
common folder is right place for it.
Change-Id: I57ca1eeaff28b853609daf92772361406131aa7e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add prj_qemu.conf files for dtls_server and dtls_client. Now
it can be tested between two qemus running 802.15.4 dummy driver.
Change-Id: Id94492f90539025854063662c2f0750a0b9ca845
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Move network testing setup from dtls-client to common net_testing.h
file which makes the application much simpler.
Change-Id: I5a727325c22f98170f12620629898e5ed052b707
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move network testing setup from dtls-server to common net_testing.h
file which makes the application much simpler.
Change-Id: Iacd99917cda3efc4cd92d0f48a8cbbc259ef7a84
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the echo-server and echo-client are run in real hw, then
we need to add the used IPv6 prefix to the system. Otherwise
the client is not able to send anything because there is no
route to 2001:db8::/64 network that is used in these examples.
Change-Id: I3a00b77acf1329b3e448bd62ec38cc408c0bd086
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Update CoAP apps project configuration files and also update
according to common net_testing header file.
Change-Id: I09294dfd71e3d0cac980be4ae6d142cc3a59d85c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
User can set the desired number of network packets that are
sent. There is an example config that sends 10000 packets
and then stops the test application.
Change-Id: I5aa9049236f7bebdc9ea9997b9eb1f672c6adcbf
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The loopback test application works now and it verifies that
the data sent is the same as data received. This fixes the
issue described in bug ZEP-101.
Change-Id: I1babfab4db9d4df0e769711aa41983366a8b5065
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This moves IPSS sample code to samples/bluetooth/gatt which shall become
the default place for GATT related samples that can be reused.
Change-Id: I04089f6e43bfcc30ee1c7cc766620f19e3dad08e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move network testing setup from echo-client to common net_testing.h
file which makes the application much simpler.
Change-Id: Ib1a90b9d87014b7f9adc5f6865ce0fc9faa13422
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move network testing setup from echo-server to common net_testing.h
file which makes the application much simpler.
Change-Id: I6f68826916c870ad7db597d30f20245bada70091
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Collect common routines used in every network sample application
into same file. These routines are used when testing with
qemu and slip.
Change-Id: I02f20b3a9bfa1e886846801b22f43a1d06c59930
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Echo-server and client will exchange data without monitor
tool support.
Change-Id: I3cf73a4baf025bf7e5fc634bef696d5f0e6b4c57
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add separate prj_qemu.conf files for qemu_86 board type. Also
remove set_options from Makefile.ipstack which is not required now.
Now build the echo-server with "make server NET_IFACE=qemu" and
echo-client with "make client NET_IFACE=qemu" command options.
Change-Id: I1f3c9c6a198f2b6cae54ae4a5da970b284ef84de
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add bt related qemu flags only when BT is enabled.
Change-Id: Idc611dcf7726829ed77c3f4898abd794a825212f
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This enables using dtls_server with Bluetooth by passing
CONF_FILE=prj_bt.conf, it is also enabled for testing so changes to
dtls-server are actually tested with NETWORKING_WITH_BT.
Change-Id: Ice4f409c8e2d9e97856159482969f6352264864b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is prefered to use #if (!)defined form for checking defines since it
can actually check more complex conditions.
Change-Id: Ia8ab6898d340967759a8ecbda65c4bcacdc0293e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables using coap-observe-client with Bluetooth by passing
CONF_FILE=prj_bt.conf, it is also enabled for testing so changes to
coap-observe-client are actually tested with NETWORKING_WITH_BT.
Change-Id: I02705f855c1974b065557986f9b231201ba310a7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is prefered to use #if (!)defined form for checking defines since it
can actually check more complex conditions.
Change-Id: I80b97d51cb321d84df417f8722e661d944504d4f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables using coap_server with Bluetooth by passing
CONF_FILE=prj_bt.conf, it is also enabled for testing so changes to
coap_server are actually tested with NETWORKING_WITH_BT.
Change-Id: I58b286520da0e0e4cba77dd52ea3f64f0268582a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is prefered to use #if (!)defined form for checking defines since it
can actually check more complex conditions.
Change-Id: I2080377b4b95e9d973e8c0753ae66dba151372e6
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables using echo_client with Bluetooth by passing
CONF_FILE=prj_bt.conf, it is also enabled for testing so changes to
echo_client are actually tested with NETWORKING_WITH_BT.
Change-Id: I1ff83a9d0049e121dc7e406656e3282b16ee8c91
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is prefered to use #if (!)defined form for checking defines since it
can actually check more complex conditions.
Change-Id: Ib8779a344a1a7ec02f10b0e23a533c78e68343b5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
User can now say "make BOARD=xxx NET_IFACE=802154" to compile
IEEE 802.15.4 support into the dtls server/client application.
The default is to compile for qemu and use slip.
Change-Id: I87f9b2d766cc5337a9c01c7657fb8d08d2d3e244
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If neighbor discovery is in use, then we do not need to do
various route etc setup. Normally ND needs to be active
but in some specific scenarios it can be turned off. One
such scenario is if an application is run inside qemu
which uses slip and host tun0 interface for communication,
in this case host typically do not activate ND for tun0
so we need to disable it also in zephyr side.
Change-Id: I8ac59990c5bbcdb06cca98bde7be3a0ad6e807a8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Rename application init function to init_app() so that it is more
descriptive.
Change-Id: Id470756345c0bd10b103270115b26f3e8a281d17
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use link local addresses instead of public IPv6 addresses
in the demo applications. This way the application do not
need to do any special setup.
Change-Id: I9aa817c388e3f673a6597801813dd1d0a8feb6b5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add spaces after a list of values as required by checkpatch script.
Change-Id: I04bd8af8195e3966fd2b9c36ead49483030eae18
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This enables using echo_server with Bluetooth by passing
CONF_FILE=prj_bt.conf, it is also enabled for testing so changes to
echo_server are actually tested with NETWORKING_WITH_BT.
Change-Id: I1d949798c7a9689ebc2d342ae7342dce32f319e5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is prefered to use #if (!)defined form for checking defines since it
can actually check more complex conditions.
Change-Id: I59c6fff1f2d4e950f9ae64adb9f8833ef0fea4d0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the reply for a sent message is not received, then try
to send it once again. If the second resend fails, then mark
the packet as failed.
Change-Id: Ibe9b9384e2e84f055c6486a5bd4d7293675e5d42
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to test unicast sending properly, disable multicast
sending temporarily.
Change-Id: If90acf003910a954770caa53825116d2a9ddadc1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fixed the IPv6 address handling so that CoAP server works
with default settings when IPv6 neighbor discovery is enabled.
Change-Id: Idd0b0df61aaebed43a9c5a408a192add445cacfe
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can now say "make BOARD=xxx NET_IFACE=802154" to compile
IEEE 802.15.4 support into the CoAP server application.
The default is to compile for qemu and use slip.
Change-Id: I2c61ac91d4ae7b2c3611567646028bc751e0419e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Consolidate networking tests into 1 directory where possible and put
files under samples/net where possible.
Change-Id: Ieb65e000e1717f4d53058f87e36840a0786d467b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: If26ed436211b40a009f60275ef64bfc9de5da066
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test should be under tests and is not a sample.
Change-Id: Ibb42207f72554516a650625a2cf4cc9cb7a0b021
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For this demo app, set the 2001:db8::/64 address in routing
table. This way we will be able to pass data using these
addresses. Something like this should not be done in real
networking environment.
Change-Id: I1764d5ae09ab95dd580c6b48d6f368bfe283a6a3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The echo-client will timeout the packet receive after 5 seconds.
This way we at least send something instead of waiting forever
if the packet is lost.
Change-Id: Idc332965786797df4ed04dc8b3ef49af32a3f436
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The echo-server uses only one code base for both microkernel
and nanokernel.
Change-Id: I7abdf76dc13c31e4f91d0fd9d3b870ffe20ac71b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The echo-client uses only one code base for both microkernel
and nanokernel.
Change-Id: Ieaf9a969319537286181ba333e3a05bfa0e9363a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Separate setup for different low level bearer. By default the
Makefile will create version suitable for qemu testing using
slip. If one writes "make NET_IFACE=802154" then IEEE 802.15.4
radio specific settings are activated.
Because echo-client does not contain any processor specific
settings, remove the ARM config files and rename the x86
specific ones.
Change-Id: I0608b6172bdd044dd49dedf86477ef8a31391a23
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Separate setup for different low level bearer. By default the
Makefile will create version suitable for qemu testing using
slip. If one writes "make NET_IFACE=802154" then IEEE 802.15.4
radio specific settings are activated.
Because echo-server does not contain any processor specific
settings, remove the ARM config files and rename the x86
specific ones.
Change-Id: I2caf26979f32496c6efb4dd1f625a60e3e5f6744
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Address configurations for different Kconfig options is difficult
to test under different environments. Make it simple at the moment.
Change-Id: I689649b11b4ccb1cf1ff0e90720fa03b6dc3656b
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Modify echo-client to send packet after packet received from
server and wait unlimited ticks. Current behaviour flood messages
to server irrespective of reception at server end. Modified
behavior only for nanokernel at the moment.
Change-Id: I6aa20c5b9fc9d6d1cf8f996e90735f5d2b986e5a
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Emulation is not supported on basic_minuteia, only qemu_86
supports emulation.
Change-Id: Id1adc6db02aa22c86207db77fb16ac7548e09dac
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Simplifies the nanokernel timer API so that the timeout parameter must be
specified when invoking nano_isr_timer_test(), nano_fiber_timer_test(),
nano_task_timer_test() and nano_timer_test().
This obsoletes the following APIs:
nano_fiber_timer_wait()
nano_task_timer_wait()
nano_timer_wait()
Note that even the though the new API requires that the timeout parameter
be specified, there are currentl only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
Theoretically, the current implementation would allow one to supply a
finite positive value for the timeout and the system would wait up to
that many ticks for the timer to expire. However, it is thought that
that unnecessarily complicates the nanokernel timer model and so it is
left as an unsupported option. Should that change, then that feature
could be enabled by updating the documentation.
Change-Id: I8835c5342ab5025d6f70fdfbed54a50add7568d7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel semaphore API so that the timeout parameter must be
specified when invoking nano_isr_sem_take(), nano_fiber_sem_take(),
nano_task_sem_take() and nano_sem_take().
This obsoletes the following APIs:
nano_fiber_sem_take_wait()
nano_fiber_sem_take_wait_timeout()
nano_task_sem_take_wait()
nano_task_sem_take_wait_timeout()
nano_sem_take_wait()
nano_sem_take_wait_timeout()
Change-Id: If7a4bce1bd8ec8d6410d04f3c16ff1922ff0910e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Ravi kumar Veeramally